PLC-RSC-125DC/21AU/MS 2909658 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PLC-RSC-125DC/21AU/MS 2909658 PHOENIX CONTACT Relay Module

PLC-RSC-125DC/21AU/MS

2909658

PHOENIX_CONTACT

Relay Module

PLC-INTERFACE, consisting of PLC-BSC.../21 base terminal block with screw connection and plug-in miniature relay with multi-layer gold contact and manual operation, 1 switched contact, input voltage 125 V DC

More details


INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Technical data

Product properties
Product typeRelay Module
Product familyPLC-INTERFACE
ApplicationPalm switch
Operating mode100% operating factor
Mechanical service life2x 107cycles
Data management status
Date of last data management01.08.2024
Article revision03

Electrical properties
Maximum power dissipation for nominal condition0.22 W
Test voltage (Winding/contact)4 kV AC (50 Hz, 1 min., winding/contact)
Insulation characteristics: Coil/contact
Rated insulation voltage250 V
Rated impulse withstand voltage6 kV
Overvoltage categoryIII
Degree of pollution3

Input data
Coil side
Nominal input voltage UN125 V DC
Input voltage range96.3 V DC ... 175 V DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)60 V DC
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN3 mA
Typical response time5 ms
Typical release time8 ms
Protective circuitReverse polarity protection; Polarity protection diode
Freewheeling diode; Freewheeling diode
Operating voltage displayYellow LED

Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact connection typeSignal contact
Contact materialAgSnO, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage100 mV (at 10 mA)
Limiting continuous current50 mA
Maximum inrush current50 mA
Min. switching current1 mA (24 V)
Short-circuit current200 A (conditional short-circuit current)
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Output fuse4 A gL/gG NEOZED
Switching: when the gold layer is destroyed
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (at 100 mA)
Limiting continuous current6 A
Min. switching current10 mA (at 12 V)
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)

Connection data
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14
Tightening torque0.6 Nm ... 0.8 Nm

Dimensions
Width6.2 mm
Height80 mm
Depth94 mm

Material specifications
Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)

Environmental and real-life conditions
Ambient conditions
Degree of protection (Relay)RT II (Relay)
Degree of protection (Relay base)IP20 (Relay base)
Ambient temperature (operation)-40 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Approvals
CE
CertificateCE-compliant
UKCA
CertificateUKCA-compliant
Shipbuilding approval
CertificateTAE0000196
Corrosive gas test
IdentificationISA-S71.04. G3 Harsh Group
EN 60068-2-60
DNV GL data
TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data
Electromagnetic compatibilityConformance with EMC directive
Low Voltage DirectiveConformance with Low Voltage Directive

Standards and regulations
Standards/regulations
Standards/regulationsIEC 60664
IEC 60947-5-1

Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

ETIM for 2909658 Relays (EC001437)
Feature Name Feature Value
Type of electric connection (EF003961) Screw connection
Complete with socket (EF003359) Yes
With detachable clamps (EF003340) No
With LED indication (EF005950) Yes
Rated control supply voltage DC (EF003980) 96.3 V
Voltage type for actuating (EF008242) DC
Drive, polarization (EF003355) Polarized
Drive, switching attitude (EF003356) Mono stable
Number of contacts as normally closed contact (EF008255) 0
Number of contacts as normally open contact (EF008256) 0
Number of contacts as change-over contact (EF008257) 1
Type of switch contact (EF003358) Single contact
With forced-guided contacts (EF003357) No
Material of contact insert (EF008521) Other
Material of contact surface (EF004020) Gold
Nominal current (EF000001) 0.003 A
Degree of protection (IP) (EF005474) IP20
Width (EF000008) 6.2 mm
Height (EF000040) 80 mm
Depth (EF000049) 94 mm

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.