ETD-FL-2T-DTI 2866187 PHOENIX CONTACT Timer relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ETD-FL-2T-DTI 2866187 PHOENIX CONTACT Timer relay

ETD-FL-2T-DTI

2866187

PHOENIX_CONTACT

Timer relay

More details


INTERFACE Components (IF)

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Key Commercial Data

Orderkey2866187
Packing unit1 pc
Catalog pagePage 278 (C-5-2017)
GTIN4046356046619
Weight per Piece (excluding packing)165.000 g
Custom tariff number85364900
Country of originAT (Austria)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width22.5 mm
Height90 mm
Depth113 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport)-25 °C ... 70 °C
Permissible humidity (operation)15 % ... 85 %
Noise immunityEN 61000-6-2

Coil side

Input voltage range24 V DC ... 240 V DC -20 % ... +25 %
24 V AC ... 240 V AC -15 % ... +10 %
Temperature sensitivity≤ 0.01 %/K
Functionlp: Switched-mode beginning with the pause
li: Switched-mode beginning with the pulse
ER: With switch-on and release delay with control contact
EWu: With switch-on delay and single shot leading edge, voltage controlled
EWs: With switch-on delay and single shot leading edge with control contact
WsWa: With single shot leading edge and single shot trailing edge with control contact
Wt: Pulse sequence evaluation (retriggerable release delay)
Time setting range50 ms ... 10 h (10 time end ranges)
Recovery time500 ms

Contact side

Contact type2 floating PDT contacts
Maximum switching voltage250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse5 A (fast-blow)

General

Status displayGreen LED (POWER)
Yellow LED (relay active)
Mechanical service lifeapprox. 2x 107cycles
Nominal power consumption2.5 VA (1 W)
Test voltage relay winding/relay contact4 kV
Mounting positionany
Assembly instructionson standard DIN rail NS 35 in accordance with EN 60715
Colorgreen
Housing insulation materialPolyamide PA, self-extinguishing
Permissible humidity (operation)15 % ... 85 %
Nominal frequency48 Hz ... 400 Hz
Rated insulation voltage300 V (acc. to EN 50178)
ConformanceCE-compliant
UL, USA/CanadaUL/C-UL listed UL 508

Connection data

Conductor cross section flexible min.0.5 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section solid min.0.5 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.14
Stripping length8 mm
Connection methodScrew connection

Control contact

Connection nameFloating, basic isolation between connection and input/output/bridge Y1-Y2
Load capacityCannot carry load
Cable length< 10 m
Control pulse lengthmin. 50 ms (only with Wt function: > 7 ms)

Standards and Regulations

Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2
Low Voltage DirectiveConformance with LV directive 2006/95/EC
Flammability rating according to UL 94V0
ConformanceCE-compliant
UL, USA/CanadaUL/C-UL listed UL 508

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.