Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
MCR-EX-IDS-I-I 2908805 PHOENIX CONTACT MINI Analog Signal Conditioner SIL 2
MCR-EX-IDS-I-I
2908805
PHOENIX_CONTACT
MINI Analog Signal Conditioner SIL 2
Ex i-Output Signal Conditioner for Separating and Transferring 0mA/4mA Signals... 20 mA from the control system to an intrinsically safe load in the Ex zone. With HART transparency, no-load voltage: 27 V DC, Standard setting, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Home > PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲Technical data
Item Properties
| Product Type | Output Separator Amplifier |
| Product Family | MINI Analog Pro |
| Configuration | DIP Switch |
System Properties
| Functionality | |
| Configuration | DIP Switch |
Electrical Properties
| Signal Transmission Behavior | In = Out |
| Gradual response (10-90%) | ≤ 10 ms |
| Maximum temperature coefficient | ≤ 0.01% |
| Maximum Transmission Error | 0,1 % |
| Galvanic Separation | |
| Surge Category | II (≤ 5000 m) |
| Degree of pollution | 2 (≤ 5000 m) |
| Galvanic Separation Input/Output/Power IEC/EN 61010-1 | |
| Standards/Specifications | IEC/EN 61010-1 |
| Sizing Insulation Voltage | 300 VEff |
| Test voltage | 2.5 kV AC (50 Hz, 60 sec) |
| Isolation | Double/reinforced insulation |
| Galvanic Separation Input/Output, IEC/EN 60079-11 Power Supply | |
| Standards/Specifications | IEC/EN 60079-11 |
| Sizing Insulation Voltage | 253 VEff |
| Galvanic Separation Input/Output/Power IEC/EN 60079-7 | |
| Standards/Specifications | IEC/EN 60079-7 |
| Sizing Insulation Voltage | 251 VEff |
| Feeding | |
| Nominal Supply Voltage | 24 V DC |
| Supply voltage | 19.2 V DC ... 30 V DC |
| Power Consumption | ≤ 1.2 W |
Input data
| Signal: Current | |
| Number of Entries | 1 |
| Input Signal Current | 0 mA ... 20 mA |
| 4 mA ... 20 mA (SIL) | |
| Input current | ≤ 30 mA |
| Voltage drop | < 3.5 V DC (20 mA) |
Output Data
| Signal: Current | |
| Description of the output | Intrinsic safety |
| Number of outputs | 1 |
| Current Output Signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA (SIL) | |
| Charging/Output Load Current Output | ≤ 700 Ω (20 mA) |
| ≤ 630 Ω (21 mA) | |
| Output Ripple | 20 mV (rms) |
| Open-circuit voltage | ≤ 27 V DC |
| Short circuit resistant | Yes |
| Line Fault Detection | > 10 kΩ (Cable break) |
| < 50 Ω (Short Circuit) | |
Connection data
| Connection type | Screw connection |
| Length to be de-insulated | 10 mm |
| Screw thread | M3 |
| Rigid conductor section | 0.2 mm² ... 1.5 mm² (with toe cap) |
| 0.14 mm² ... 2.5 mm² (without toe) | |
| Flexible conductor section | 0.14 mm² ... 2.5 mm² |
| AWG Conductor Section | 24 ... 12 (flexible) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
Ex Data
| Ex Installation (EPL) | Gc |
| Div. 2 | |
| Intrinsically safe circuits (EPL) | Ga |
| Gives | |
| Ma | |
| Div. 1 | |
| Technical Safety Data | |
| Internal inductance max. Li | despicable |
| Max. Internal Capacity Ci | 7 nF |
| Max. output voltage Uor | 26.4 V |
| Max. Output Current Ior | 98 mA |
| Max. output power Por | 647 mW |
| Maximum safety voltage Um | 253 V AC |
| 125 V DC | |
| IIA/I (Single Electrical Circuit): External Inductance Max. Lor/ Max. external capacity Cor | 10 mH / 2.48 μF |
| IIB/III (single electrical circuit): External inductance max. Lor/ Max. external capacity Cor | 4 mH / 730 nF |
| IIC (Single Electrical Circuit): External inductance max. Lor/ Max. external capacity Cor | 2 mH / 89 nF |
| IIA/I (Combined Electrical Circuit): External inductance max. Lor/ Max. external capacity Cor | 10 mH / 493 nF, 1 mH / 553 nF, 500 μH / 653 nF, 200 μH / 833 nF, 100 μH / 993 nF |
| IIB/III (Combined Electrical Circuit): External inductance max. Lor/ Max. external capacity Cor | 4 mH / 303 nF, 1 mH / 383 nF, 500 μH / 463 nF, 200 μH / 613 nF, 100 μH / 733 nF |
| IIC (Combined Electrical Circuit): External inductance max. Lor/ Max. external capacity Cor | 1.4 mH / 42 nF, 1 mH / 49 nF, 500 μH / 66 nF, 200 μH / 89 nF |
Interfaces
| Data communication (bypass) | |
| Supported Protocols | With HART Transparency |
Signage
| Status Indication | Green LED (supply voltage) |
Dimensions
| Width | 6.2 mm |
| Height | 109.81 mm |
| Depth | 119.2 mm |
Material Data
| Colour | grey (RAL 7042) |
| Shell material | PBT |
Environmental and life-life conditions
| Environmental conditions | |
| Ambient Temperature (Service) | -40 °C ... 70°C (Discretionary mounting position) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 85 °C |
| Permissible air humidity (service) | 5 % ... 95% (at 25°C, non-condensing) |
| Crashes (in service) | 15g (DIN EN 60068-2-27) |
| Vibration (in service) | 5g (DIN EN 60068-2-6) |
| Superior range of use (IEC/EN 61010-1) | |
| Height Range | > 2000 m ... 3000 m |
| Ambient Temperature (Service) | -40 °C ... 63 °C |
| Sizing Insulation Voltage | 300 VEff(Input/Output/Power) |
| Isolation | Double/reinforced insulation |
| Superior range of use (IEC/EN 61010-1) | |
| Height Range | > 3000 m ... 4000 m |
| Ambient Temperature (Service) | -40 °C ... 56 °C |
| Sizing Insulation Voltage | 300 VEff(Input/Output/Power) |
| Isolation | Double/reinforced insulation |
| Superior range of use (IEC/EN 61010-1) | |
| Height Range | > 4000 m ... 5000 m |
| Ambient Temperature (Service) | -40 °C ... 49 °C |
| Sizing Insulation Voltage | 150 VEff(Input/Output/Power) |
| Isolation | Double/reinforced insulation |
| Superior application range (IEC/EN 60079-11) | |
| Height Range | > 2000 m ... 3000 m |
| Ambient Temperature (Service) | -40 °C ... 63 °C |
| Maximum safety voltage Um | 121 V AC |
| 110 V DC | |
| Sizing Insulation Voltage | 150 VEff(Input/Output, Power) |
| Superior application range (IEC/EN 60079-11) | |
| Height Range | > 3000 m ... 4000 m |
| Ambient Temperature (Service) | -40 °C ... 56 °C |
| Maximum safety voltage Um | 33 V AC/DC |
| Sizing Insulation Voltage | 60 VEff(Input/Output, Power) |
| Superior application range (IEC/EN 60079-11) | |
| Height Range | > 4000 m ... 5000 m |
| Ambient Temperature (Service) | -40 °C ... 49 °C |
| Maximum safety voltage Um | 33 V AC/DC |
| Sizing Insulation Voltage | 60 VEff(Input/Output, Power) |
| Superior Operating Range (IEC/EN 60079-7) | |
| Height Range | > 2000 m ... 3000 m |
| Ambient Temperature (Service) | -40 °C ... 63 °C |
| Sizing Insulation Voltage | 162 VEff(Input/Output/Power) |
| Superior Operating Range (IEC/EN 60079-7) | |
| Height Range | > 3000 m ... 4000 m |
| Ambient Temperature (Service) | -40 °C ... 56 °C |
| Sizing Insulation Voltage | 60 VEff(Input/Output/Power) |
| Superior Operating Range (IEC/EN 60079-7) | |
| Height Range | > 4000 m ... 5000 m |
| Ambient Temperature (Service) | -40 °C ... 49 °C |
| Sizing Insulation Voltage | 60 VEff(Input/Output/Power) |
Approvals
| Ce | |
| Certificate | CE Compliance |
| ATEX | |
| Marked | II (1) G [Ex ia Ga] IIC |
| II (1) D [Ex ia Da] IIIC | |
| II 3 (1) G Ex ec [ia Ga] IIC T4 Gc | |
| I (M1) [Ex ia Ma] I | |
| Certificate | BVS 23 ATEX 006 X |
| IECEx | |
| Marked | [Ex ia Ga] IIC |
| [Ex ia Da] IIIC | |
| Ex ec [ia Ga] IIC T4 Gc | |
| [Ex ia Ma] I | |
| Certificate | IECEx BVS 23.0003X |
| CCC/China-Ex | |
| Marked | [Ex ia Ga] IIC |
| [Ex ia Da] IIIC | |
| Ex ec [ia Ga] IIC T4 Gc | |
| Certificate | 2023122310117250 |
| UL, USA/Canada | |
| Marked | UL 61010-2-201 Listed |
| Class I, Div. 1, Groups A, B, C, D | |
| Class II, Div. 1 Groups E, F, G | |
| Class III, Div. 1 | |
| Class I, Zone 0, 1, 2, Groups IIC, IIB, IIA | |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| Certificate | , C.D.-No 97285872 |
| Safety Integrity Level (SIL, IEC 61508) | |
| Marked | 3 |
| Observation | Channel |
| INMETRO | |
| Marked | [Ex ia Ma] I |
| [Ex ia Ga] IIC | |
| [Ex ia Da] IIIC | |
| Ex ec [ia Ga] IIC T4 Gc | |
| Certificate | DNV 23.0186 X |
EMC data
| Low Voltage Directive | In accordance with the NS directive |
| Interference resistance | EN 61000-6-2 |
| EN 61326-3-2 | |
| Electromagnetic compatibility | Testing according to the following standards and requirements: EN 61326-1 for use in the industrial field, NAMUR NE 21 |
| Interference emission | EN 61000-6-4 |
assembly
| Type of mounting | Rail mounting |
| Position for mounting | discretionary |
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.