MINI MCR-SL-UI-2I-SP-NC 2864189 PHOENIX CONTACT MCR 4-way signal duplicator for electrical isolation and dou.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

MINI MCR-SL-UI-2I-SP-NC 2864189 PHOENIX CONTACT MCR 4-way signal duplicator for electrical isolation and dou..

MINI MCR-SL-UI-2I-SP-NC

2864189

PHOENIX_CONTACT

Available

Ship on today

MCR 4-way signal duplicator for electrical isolation and doubling of analog signals with spring-cage connection, standard configuration

More details


Converters

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Modular Converter MCR technique. Analog - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+$257.80
2+$250.06
3+$246.36
4+$245.04
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Product description

The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion, amplification and filtering of standard signals.

On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation).

The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.

Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

Dimensions

Width6.2 mm
Height93.1 mm
Depth102.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Degree of protectionIP20

Input data

Number of inputs1
Configurable/programmableYes, unconfigured
Voltage input signal0 V ... 10 V (please indicate if different setting when ordering)
1 V ... 5 V
Current input signal0 mA ... 20 mA
4 mA ... 20 mA
Max. input voltage30 V
Max. input current50 mA
Input resistance of voltage inputapprox. 100 kΩ
Input resistance current inputapprox. 50 Ω

Output data

Number of outputs2
Configurable/programmableYes, unconfigured
Current output signal2x 0 mA ... 20 mA
2x 4 mA ... 20 mA
Max. output currentapprox. 22 mA
Load/output load current output≤ 250 Ω (at 20 mA)

Power supply

Nominal supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption< 30 mA (at 24 V DC incl. load)
Power consumption< 600 mW

Connection data

Connection methodSpring-cage connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Stripping length8 mm

General

No. of channels2
Maximum transmission error≤ 0.2 % (of final value)
Transmission error, typical< 0.1 %
Maximum temperature coefficient< 0.01 %/K
Temperature coefficient, typical< 0.004 %/K
Limit frequency (3 dB)approx. 35 Hz
Protective circuitTransient protection
Electrical isolationBasic insulation according to EN 61010
Overvoltage categoryII
Pollution degree2
Rated insulation voltage50 V AC/DC
Test voltage, input/output/supply1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Colorgreen
Housing materialPBT
Mounting positionany
Assembly instructionsThe T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ConformanceCE-compliant
ATEXEx II 3 G Ex nA IIC T4 Gc X
UL, USA / CanadaUL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
GLGL EMC 2 D

EMC data

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Typical deviation from the measuring range final value5 %
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Typical deviation from the measuring range final value5 %
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Typical deviation from the measuring range final value5 %

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2864189-MINI MCR-SL-UI-2I-SP-NC English 129 Kbytes PHOENIX CONTACT-2864189-MINI MCR-SL-UI-2I-SP-NC

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.