Product successfully added to your shopping cart
HC-COM-Q4/2-I-CT-M-PL 100
1556164
PHOENIX_CONTACT
1
Contact insert, number of poles: 4+2+PE, size: COM, power contacts: 4, control contacts: 2, number of connections per pole: 1, Male, crimped connection, 400 V, 40 A, 1.5 mm² ... 10 mm², Application: Power/Signal
Contact insert, number of positions: 4+2+PE, size: COM, power contacts: 4, control contacts: 2, number of connections per position: 1, Pin, Crimp connection, 400 V, 40 A, 1.5 mm2 ... 10 mm2, application: Power/signal, Packing unit: 100 pcs
Industrial plug-in connectors/interfaces
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
General | Connectors may be operated only when there is no load/voltage. |
General | For CK4,0-ED... (power circuit), CK1,6-ED... (control circuit) crimp contacts |
Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
Can only be used in plastic housing |
Type | COM |
Product type | Contact insert with a fixed no. of positions |
Number of positions | 6 |
Connection profile | 4+2+PE |
Contact numbering | 1 - 4 (power contacts) |
11 - 12 (control contacts) | |
Application | Power/signal |
Number of connections per position | 1 |
No. of power contacts | 4 |
No. of control contacts | 2 |
Contact material type | turned |
Series | HC-COM |
Insulation characteristics | |
Overvoltage category | III |
Degree of pollution | 3 |
Dimensional drawing | |
Width | 26.3 mm |
Height | 52.3 mm |
Length | 45.5 mm |
Mechanical characteristics | |
Contact diameter | 4 mm |
Connection technology | |
Connection technology | Crimp connection (power contacts) |
Crimp connection (control contacts) | |
Crimp connection (PE contact) | |
Number of connections per position | 1 |
Connection in acc. with standard | IEC / EN |
Conductor connection | |
Conductor cross section | 1.5 mm² ... 10 mm² (power contacts) |
0.14 mm² ... 2.5 mm² (control contacts) | |
Connection cross section AWG | 16 ... 8 (power contacts) |
26 ... 14 (control contacts) | |
Tightening torque | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
Stripping length of the individual wire | 9 mm (for 1.5 ... 2.5 mm²) |
9.6 mm (Power 4 ... 6 mm²) | |
16 mm (10 mm² power circuit) | |
6 mm (Signal 2.5 mm²) |
Rated voltage (III/3) | 400 V (Phase-ground power contacts) |
250 V (control contacts) | |
690 V (Phase-phase power contacts) | |
Rated voltage for power contacts | 400/690 V |
250 | |
Rated surge voltage | 6 kV (Phase-phase power contacts) |
4 kV (control contacts) | |
Rated current | 40 A (power contacts) |
10 A (control contacts) |
Mechanical data | |
Insertion/withdrawal cycles | ≥ 500 |
Flammability rating according to UL 94 | V0 |
Seal material | NBR |
Contact material | Copper alloy |
Contact surface material | Ag (alternatively Au) |
Contact carrier material | PC |
Material of contact surface, power contact | Ag |
Material of contact surface, control contact | Ag (alternatively Au) |
Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Ambient conditions | |
Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
Testing | |
Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX CONNECTORS EN.pdf | 57 Mbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.