FL MC 10/100BASE-T/FO-660 2708193 PHOENIX CONTACT FO converter, for converting 10/100Base-T to polymer and P.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FL MC 10/100BASE-T/FO-660 2708193 PHOENIX CONTACT FO converter, for converting 10/100Base-T to polymer and P..

FL MC 10/100BASE-T/FO-660

2708193

PHOENIX_CONTACT

Available

Ship on today

FO converter, for converting 10/100Base-T to polymer and PCF fiber, (660 nm), SC-RJ FO connection (PROFINET standard), rail-mountable, supply 24 V DC

More details


Converters

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Interface converter, separators and modems. Serial - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Width22.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-30 °C ... 70 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Altitude5000 m (For restrictions see manufacturer's declaration)
Degree of protectionIP20
Noise immunityEN 61000-6-2:2005

General

Electrical isolationVCC // Ethernet
Test voltage data interface/power supply1500 V
1.5 kVrms (50 Hz, 1 min.)
Standards/regulationsEN 60950-1
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC (valid until 19.04.2016) / 2014/30/EU (valid from 20.04.2016)
Noise emissionEN 50081-2
Net weight120.1 g
Housing materialPA V0
Colorgreen
MTBF564 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
136 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
MTTF885 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day))
446 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
202 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day))
ConformanceCE-compliant
ATEXEx II 3 G Ex nA nC IIC T4 Gc X (Please follow the special installation instructions in the documentation!)
UL, USA / Canada508 recognized

Power supply

Supply voltage range18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
23 V DC ... 25 V DC (as an alternative or redundant, via backplane bus contact and system current supply)
Typical current consumption≤ 100 mA (24 V DC)
Protective circuitProtection against polarity reversal
Connection methodPlug-in screw terminal block (COMBICON), redundancy possible

Serial interface

Interface 1Ethernet interface, 10/100BASE-T(X) in acc. with IEEE 802.3u
Connection methodRJ45 socket, shielded
Transmission mediumCopper
Transmission length100 m (twisted pair, shielded)
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Auto-negotiation modesOptionally transparent via TP and FO (default) or locally on TP
Link throughLink down is automatically forwarded to the second connection
MDI-/MDI-X switchoverBuilt-in switch for line (1:1) and crossover connection
Signal LEDsActivity (yellow), link status (green, UL flashing), 100 Mbps (green)

Optical interface FO

Transmit capacity, minimummin. -8 dBm ((980/1000 µm) static)
min. -19 dBm ((200/230 µm) static)
Transmit capacity, maximummax. -2 dBm ((980/1000 µm) static)
max. -11 dBm ((200/230 µm) static)
Minimum receiver sensitivitymin. -23 dBm ((980/1000 µm) static)
min. -26.8 dBm ((200/230 µm) static)
Wavelength660 nm
Transmission length incl. 3 dB system reserve70 m (Polymer fiber with F-P 980/1000 230 dB/km at 10 Mbps)
300 m (PCF fiber with F-K 200/230 8 dB/km at 10 Mbps)
50 m (Polymer fiber with F-P 980/1000 230 dB/km at 100 Mbps)
100 m (PCF fiber with F-K 200/230 8 dB/km at 100 Mbps)
300 m (HCS GI fiber with F-GK 200/230 at 100 Mbps)
400 m (HCS GI fiber with F-GK 200/230 at 10 Mbps)
Transmission mediumPolymer fiber
PCF fiber
Connection methodSC-RJ

Function

Status and diagnostic indicatorsUL (communications power, green)

Digital outputs

Output nameRelay output
Number of outputs2
Contact typeN/O contact
Maximum switching voltage60 V AC/DC
Max. switching current1 A

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2708193-FL MC 10/100BASE-T/FO-660 English 332 Kbytes PHOENIX CONTACT-2708193-FL MC 10/100BASE-T/FO-660

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.