Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
FMCD 1,5/ 5-ST-3,5 AU 1011700 PHOENIX CONTACT Connector for printed circuit board, number of poles: 5, pitch..
FMCD 1,5/ 5-ST-3,5 AU
1011700
PHOENIX_CONTACT
50
Connector for printed circuit board, number of poles: 5, pitch: 3.5 mm, connection type: spring clamp push-in, color: green, surface, contacts: Gold
PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 5, pitch: 3.5 mm, connection method: Push-in spring connection, color: green, contact surface: Gold
Connectors > Cable connector
PCB Connectors (PCC)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲Data commercial
| Key order | One million eleven thousand seven hundred |
|---|---|
| Packing unit | 50 pcs |
| Key selling | AAAEAB - |
| Minimum order quantity | 50 pcs |
| EAN | Four trillion fifty five billion six hundred twenty six million four hundred eighty six thousand five hundred thirty six |
| Unit weight (excluding packaging) | 5,850 g |
| Tariff number tariff | Eighty five million three hundred sixty six thousand nine hundred ninety |
Properties of the article
| Abbreviation | Plug-in connector for plate circ. printed |
|---|---|
| Plug-in system | MINI COMBICON |
| Type of contact | Female connection |
| Family of articles | FMCD 1,5/..-ST |
| Step | 3.5 mm |
| Number of poles | Five |
| Type of connection | Connection by spring loaded push-in |
| Number of floors | Two |
| Number of connections | Ten |
| Number of potential | Ten |
Characteristic data electrical
| Rated current | 8 To |
|---|---|
| Rated voltage | 160 V |
| Tension sizing | 160 V |
| Tension and sizing (III/2) | 160 V |
| Tension and sizing (II/2) | 320 V |
| Transient voltage design (III/3) | 2.5 kV |
| Transient voltage design (III/2) | 2.5 kV |
| Transient voltage design (II/2) | 2.5 kV |
Ability conex.
| Type of connection | Connection by spring loaded push-in |
|---|---|
| plug-in | yes |
| Section of conductor rigid | 0,2 mm2 ... 1.5 mm2 |
| Section of flexible conductor | 0,2 mm2 ... 1.5 mm2 |
| Section of conductor AWG / kcmil | 24 ... 16 |
| Section of flexible conductor with toe cap, without plastic sleeve | 0.25 mm2 ... 1.5 mm2 |
| Section of flexible conductor with toe, with plastic sleeve | 0.25 mm2 ... 0.75 mm2 |
| Length of peeling | 10 mm |
Directions on cutting edge
| Clamp crimp recommended | 1212034 CRIMPFOX 6 |
|---|---|
| Leading without collar is insulated, according to DIN 46228-1 | Section: 0.25 mm2; Length: 7 mm |
| Section: 0,34 mm2; Length: 7 mm | |
| Section: 0.5 mm2; Length: 8 mm ... 10 mm | |
| Section: 0.75 mm2; Length: 8 mm ... 10 mm | |
| Section: 1 mm2; Length: 8 mm ... 10 mm | |
| Section: 1.5 mm2; Length: 10 mm | |
| Clamp crimp recommended | 1212034 CRIMPFOX 6 |
| Leading with collar insulated, according to DIN 46228-4 | Section: 0.14 mm2; Length: 8 mm |
| Section: 0.25 mm2; Length: 8 mm ... 10 mm | |
| Section: 0,34 mm2; Length: 8 mm ... 10 mm | |
| Section: 0.5 mm2; Length: 8 mm ... 10 mm | |
| Section: 0.75 mm2; Length: 10 mm |
Material data - contact
| Observation | According to WEEE/RoHS, without filaments according to IEC 60068-2-82/JEDEC JESD 201 |
|---|---|
| Material contact | Cu alloy |
| Characteristics of the surface | partially gilded |
| Metal surface of the point of embornaje (top layer) | Tin (3 - 8 ám Sn) |
| Metal surface of the point of embornaje (intermediate layer) | Nickel (2 - 4 ám Ni) |
| Metal surface area of contact (top layer) | Gold (0,8 - 1 µm Au) |
| Metal surface area of contact (middle layer) | Nickel (2 - 4 ám Ni), |
Material data - housing
| Color housing | green (6021) |
|---|---|
| Isolation | PA |
| Group insulating material | I |
| CTI according to IEC 60112 | Six hundred |
| Class of flammability according to UL 94 | V0 |
| Number of flammability of filaments GWFI according to en 60695-2-12 | Eight hundred fifty |
| Ignition temperature of filaments GWIT according to en 60695-2-13 | Seven hundred seventy five |
| Temperature test of the hardness for the balls according to en 60695-10-2 | 125 °C |
Material data: drive element
| Isolation | PBT |
|---|---|
| CTI according to IEC 60112 | Six hundred |
| Class of flammability according to UL 94 | V0 |
Product dimensions
| Length [ l ] | 222,9 mm |
|---|---|
| Width [ w ] | 18,2 mm |
| Height [ h ] | 16 mm |
| Step | 3.5 mm |
| Height of building (height without the shank of soldering) | 16 mm |
| Average | 14 mm |
Indications of packing
| Type of packaging | packaged in box |
|---|---|
| Packing unit | Fifty |
| Designation packing Units | Units |
Environmental conditions
| Ambient temperature (storage / transport) | -40 °C ... 70 °C |
|---|---|
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Room temperature (service) | -40 °C ... 100 °C (in function of the curve derating) |
Lines of flight and air spaces
| Air spaces and lines of flight | DIN EN 60664-1 (VDE 0110-1):2008-01 |
|---|---|
| Specification of the test | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Minimum value of air gap - field inhomogéneo (III/3) | 1.5 mm |
| Minimum value of air gap - field inhomogéneo (III/2) | 1.5 mm |
| Minimum value of air gap - field inhomogéneo (II/2) | 1.5 mm |
| Minimum value of the line of flight (III/3) | 2 mm |
| Minimum value of the line of flight (III/2) | 1.5 mm |
| Minimum value of the line of flight (II/2) | 1.6 mm |
Environmental Product Compliance
| China RoHS | Space of time for the intended use: unlimited = FEUP-e |
|---|---|
| No dangerous substances above the thresholds |
Ratings
eCl@ss
| eCl@ss 4.0 | Twenty seven million two hundred sixty thousand seven hundred |
|---|---|
| eCl@ss 4.1 | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 5.0 | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 5.1 | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 6.0 | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 7.0 | Twenty seven million four hundred forty thousand three hundred nine |
| eCl@ss 8.0 | Twenty seven million four hundred forty thousand three hundred nine |
| eCl@ss 9.0 | Twenty seven million four hundred forty thousand three hundred nine |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX PCB CONNECTORS EN.pdf | 15 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.