Product successfully added to your shopping cart
FLT-MB-T1-264/25-3+1-UT
1461303
PHOENIX_CONTACT
1
Combined lightning and surge arrester type 1+2+3
High-performance, spark gap-based non-pluggable lightning current arrester / surge protective device for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for lightning protection levels I and II.
Home > PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
IEC test classification | T1 + T2 + T3 |
I + II + III | |
EN type | T1 + T2 + T3 |
IEC power supply system | TN-S |
TT | |
Type | DIN rail module, one-piece |
Product type | Combination type |
Surge protection fault message | optical |
Insulation characteristics | |
Overvoltage category | IV |
Pollution degree | 2 |
Nominal frequency fN | 50 Hz (60 Hz) |
Cross section AWG | (converted acc. to IEC) |
Connection method | Screw connection |
Screw thread | M5 |
Tightening torque | 3 Nm (2,5 mm² ... 16 mm²) |
4.5 Nm (25 mm² ... 35 mm²) | |
Stripping length | 18 mm |
Conductor cross section flexible | 2.5 mm² ... 25 mm² |
Conductor cross section rigid | 2.5 mm² ... 35 mm² |
Conductor cross section AWG | 13 ... 2 |
Connection method | Fork-type cable lug |
Conductor cross section flexible | 2.5 mm² ... 25 mm² |
Dimensional drawing | |
Width | 72 mm |
Height | 89.8 mm |
Depth | 76.6 mm (incl. DIN rail 7.5 mm) |
Horizontal pitch | 4 Div. |
Flammability rating according to UL 94 | V-0 |
CTI value of material | 600 |
Insulating material | PBT |
Material group | I |
Housing material | PBT |
Mechanical data | |
Open side panel | No |
Mode of protection | L-N |
L-PE | |
N-PE | |
Nominal voltage UN | 240/415 V AC (TN-S) |
240/415 V AC (TT) | |
Nominal frequency fN | 50 Hz (60 Hz) |
Maximum continuous voltage UC | 264 V AC |
Rated load current IL | 80 A (< 55 °C) |
Residual current IPE | ≤ 0.01 mA |
Nominal discharge current In(8/20) µs (L-N) | 25 kA |
Nominal discharge current In(8/20) µs (L-PE) | 25 kA |
Nominal discharge current In(8/20) µs (N-PE) | 100 kA |
Combination wave UOC | 6 kV |
Impulse discharge current (10/350) µs (L-N), charge | 12.5 As |
Impulse discharge current (10/350) µs (L-N), specific energy | 156 kJ/Ω |
Impulse discharge current (10/350) µs (L-N), peak current value Iimp | 25 kA |
Impulse discharge current (10/350) µs (L-PE), charge | 12.5 As |
Impulse discharge current (10/350) µs (L-PE), specific energy | 156 kJ/Ω |
Impulse discharge current (10/350) µs (L-PE), peak current value Iimp | 25 kA |
Impulse discharge current (10/350) µs (N-PE), charge | 50 As |
Impulse discharge current (10/350) µs (N-PE), specific energy | 2500 kJ/Ω |
Impulse discharge current (10/350) µs (N-PE), peak current value Iimp | 100 kA |
Total discharge current Itotal(10/350) µs | 100 kA |
Follow current quenching capacity Ifi(L-N) | 25 kA |
Follow current interrupt rating Ifi(N-PE) | 100 A |
Short-circuit current rating ISCCR | 25 kA |
Voltage protection level Up(L-N) | ≤ 1.5 kV |
Voltage protection level Up(L-PE) | ≤ 2.5 kV |
Voltage protection level Up(N-PE) | ≤ 1.5 kV |
Residual voltage Ures(L-N) | ≤ 1.5 kV (at In) |
≤ 1.3 kV (at 12.5 kA) | |
≤ 1.1 kV (at 5 kA) | |
≤ 1 kV (at 2.5 kA) | |
Residual voltage Ures(L-PE) | ≤ 1.7 kV (at In) |
≤ 1.5 kV (at 12.5 kA) | |
≤ 1.3 kV (at 5 kA) | |
≤ 1.2 kV (at 2.5 kA) | |
Residual voltage Ures(N-PE) | ≤ 1.5 kV (at In) |
≤ 1.3 kV (at 50 kA) | |
≤ 1.1 kV (at 20 kA) | |
≤ 1 kV (at 10 kA) | |
TOV behavior at UT(L-N) | 457 V AC (5 s / withstand mode) |
457 V AC (120 min / withstand mode) | |
TOV behavior at UT(N-PE) | 1200 V AC (200 ms / withstand mode) |
Response time tA | ≤ 100 ns |
Max. backup fuse with V-type through wiring | 80 A (gG) |
Max. backup fuse with branch wiring | 315 A (gG) |
Ambient conditions | |
Degree of protection | IP20 (Installed) |
Ambient temperature (operation) | -40 °C ... 85 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 5000 m |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 2g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 0,5g (9 … 200 Hz / 2.5 h / X, Y, Z) |
Standards/specifications | IEC 61643-11 |
Note | 2011 |
Standards/specifications | EN 61643-11 |
Note | 2012 |
Mounting type | DIN rail: 35 mm |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.