FLK 24/EZ-DR/2000/KONFEK/S 2909787 PHOENIX CONTACT Cable View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FLK 24/EZ-DR/2000/KONFEK/S 2909787 PHOENIX CONTACT Cable

FLK 24/EZ-DR/2000/KONFEK/S

2909787

PHOENIX_CONTACT

10

Cable

Shielded ready-made round cable; Connection 1: Female IDC/FLK connection (1x 24-poles); Connection 2: Female IDC/FLK connection (1x 24-poles) (Braided screen protrudes from the separate cable end.); Cable length: 20 m

Assembled shielded round cable; connection 1: IDC/FLK socket strip (1x 24-position); connection 2: IDC/FLK socket strip (1x 24-position) (The braided shield is routed to a separate cable end.); cable length: 20 m

More details


INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Technical data

Product properties
Product typeSystem cable

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP00
Degree of protection (Installation location)≥ IP54 (Installation location)
Ambient temperature (operation)-40 °C ... 70 °C (fixed installation)
-10 °C ... 70 °C (flexible installation)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m

Electrical properties
Operating voltage (AC)≤ 30 V AC
Operating voltage (DC)≤ 60 V DC
Nominal operating mode100% operating factor
Current (Per path, 50°C)≤ 1 A (Uncoiled, see derating)
Current (Per path, 70°C)≤ 0.6 A (Uncoiled, see derating)

Cable/line
Cable length20 m
40X0.14 [PVC]
UL AWM Style2464/1061
Number of positions40
Shieldedyes
Cable type40X0.14 [PVC]
Conductor typeAssembled shielded round cable
Conductor structure signal line7x 0.16 mm
AWG signal line26
Conductor cross section40x 0.14 mm²
Wire diameter incl. insulation1 mm ±0.03 mm
External cable diameter9.80 mm ±0.3 mm
Outer sheath, materialSemi-rigid PVC
External sheath, colorgray
Conductor materialTin-plated Cu litz wires
Cable resistance≤ 145 Ω/km (at 20 °C)
Insulation resistance≥ 20 MΩ*km (20 °C)
Smallest bending radius, fixed installation101 mm
Smallest bending radius, movable installation182 mm
Dynamic load capacity (bending)Max. bending cycles: 5000 (at a radius of ≥ 18x outside diameter)
Halogen-freeno
Flame resistanceIEC 60332-1-2 (raw cable)
VDE 0842, Part 332-1-2 (raw cable)
IEC 60332-3-22 (raw cable)
UL VW-1
CSA FT-1
Resistance to oilcan withstand occasional splashes (raw cable)
Cable typeCable for one module

Connection data
Connection 1
Connection in acc. with standardbased on IEC 60603-13
Connection methodIDC/FLK socket strip
Number of connections1
Number of positions24
Insertion/withdrawal cycles> 50
Pitch2.54 mm
Connection 2
Connection in acc. with standardbased on IEC 60603-13
Connection methodIDC/FLK socket strip
Number of connections1
Number of positions24
NoteThe braided shield is routed to a separate cable end.
The separate cable end is approximately 0.5 m long (H05V-K 1 mm², black)
Insertion/withdrawal cycles> 50
Pitch2.54 mm

Notes
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.