Product successfully added to your shopping cart
MACX MCR-EX-SL-RTD-I-SP-NC
2924168
PHOENIX_CONTACT
1
Temperature measuring transducer
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2924168 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 145 (C-5-2017) |
GTIN | 4046356438957 |
Weight per Piece (excluding packing) | 132.100 g |
Custom tariff number | 85437090 |
Country of origin | DE (Germany) |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
---|
Ambient temperature (operation) | -20 °C ... 60 °C (Any mounting position) |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Maximum altitude | ≤ 2000 m |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Sensor types (RTD) that can be used | Sensors (2-, 3-, 4-wire) |
---|---|
Temperature measuring range | -200 °C ... 850 °C (Range depending on the sensor type) |
Input signal range | 0 Ω ... 2000 Ω |
Cable resistance | ≤ 50 Ω per cable |
Sensor input current | 200 μA ... 1 mA |
Measuring range span | min. 50 K |
Signal output | Current output |
---|---|
Configurable/programmable | Yes |
Current output signal | 0 mA ... 20 mA |
4 mA ... 20 mA | |
Load/output load current output | ≤ 500 Ω |
Output ripple (current) | < 50 µAPP |
Behavior in the event of a sensor error | As per NE 43 or can be freely defined |
Configurable/programmable | no |
Nominal supply voltage | 24 V DC |
---|---|
Supply voltage range | 19.2 V DC ... 30 V DC (24 V DC -20%...+25%) |
Power dissipation | < 1 W |
Conductor cross section solid min. | 0.2 mm² |
---|---|
Conductor cross section solid max. | 1.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 1.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 16 |
Stripping length | 8 mm |
Connection method | Push-in connection |
No. of channels | 1 |
---|---|
Temperature coefficient, typical | 0.01 %/K |
Step response (0–99%) | typ. 700 ms |
≤ 1100 ms | |
Alignment zero | ± 5 % |
Alignment span | ± 5 % |
Status display | Green LED (supply voltage, PWR) |
Red LED, flashing 2.4 Hz (cable error, sensor error on input or output, ERR) | |
Red LED, flashing 1.2 Hz (service operation, ERR) | |
Red LED, permanently on (module error, ERR) | |
Flammability rating according to UL 94 | V0 |
Degree of pollution | 2 |
Overvoltage category | II |
Interference emission | EN 61000-6-4 |
Housing material | PA 6.6-FR |
Color | gray |
Designation | Input/output/power supply |
Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
2.5 kV (50 Hz, 1 min., test voltage) | |
Designation | Input/output |
Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Designation | Input/power supply |
Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Conformance | CE-compliant, additionally EN 61326 |
ATEX | II (1) G [Ex ia Ga] IIC/IIB |
II (1) D [Ex ia Da] IIIC | |
II 3(1) G Ex nA ic [ia Ga] IIC T4 Gc X | |
IECEx | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA ic [ia Ga] IIC T4 Gc | |
UL, USA/Canada | Class I Div 2; IS for Class I, II, III Div 1 |
Max. output voltage Uo | 6 V |
---|---|
Max. output current Io | 6.3 mA |
Max. output power Po | 9.4 mW |
Group | IIC |
Max. external inductivity Lo | 100 mH |
Max. external capacity Co | 1.4 µF |
Group | IIC |
Max. external inductivity Lo | 10 mH |
Max. external capacity Co | 1.9 µF |
Group | IIC |
Max. external inductivity Lo | 1 mH |
Max. external capacity Co | 2.7 µF |
Group | IIB |
Max. external inductivity Lo | 100 mH |
Max. external capacity Co | 6.9 µF |
Group | IIB |
Max. external inductivity Lo | 10 mH |
Max. external capacity Co | 9.4 µF |
Group | IIB |
Max. external inductivity Lo | 1 mH |
Max. external capacity Co | 15 µF |
Safety-related maximum voltage Um | 253 V AC (125 V DC) |
Designation | Electromagnetic RF field |
---|---|
Standards/regulations | EN 61000-4-3 |
Designation | Fast transients (burst) |
Standards/regulations | EN 61000-4-4 |
Designation | Conducted interferences |
Standards/regulations | EN 61000-4-6 |
Noise emission | EN 61000-6-4 |
---|---|
Designation | Electromagnetic RF field |
Standards/regulations | EN 61000-4-3 |
EN 61000-4-4 | |
Designation | Conducted interferences |
Standards/regulations | EN 61000-4-6 |
Flammability rating according to UL 94 | V0 |
Conformance | CE-compliant, additionally EN 61326 |
ATEX | II (1) G [Ex ia Ga] IIC/IIB |
II (1) D [Ex ia Da] IIIC | |
II 3(1) G Ex nA ic [ia Ga] IIC T4 Gc X | |
IECEx | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA ic [ia Ga] IIC T4 Gc | |
UL, USA/Canada | Class I Div 2; IS for Class I, II, III Div 1 |
Group | IIC |
IIC | |
IIC | |
IIB | |
IIB | |
IIB |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PHOENIX CONTACT-2924168-MACX MCR-EX-SL-RTD-I-SP-NC | 137 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.