Best sellers

▲

More info

Key Commercial Data

Orderkey	1628080
Packing unit	1 pc
Note	Made to Order (non-returnable)
Catalog page	Page 768 (C-2-2017)
GTIN	4055626379074
Weight per Piece (excluding packing)	2,981.000 g
Custom tariff number	85366990
Country of origin	DE (Germany)

Product definition

Product type	HOME charging technology set starter kit for easy assembly of a charging station
Type	HOME
Standards/regulations	IEC 62196-2
	IECˆ61851-1
Charging standard	Type 2
Charging mode	Mode 3, Case B
Note	Set of all Phoenix Contact charging technology products and terminal blocks with recommendations for further components required (charging contactor, safety equipment)
	The installation and startup of this device may only be performed by an electrically skilled person. Observe the applicable national standards and regulations.
	The individual components bear a CE marking if legally required.
Number of supported charging points	1
Locking release in the event of mains failure	Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet

Dimensions

Conductor length	0.70 m
Cable length of locking actuator	0.50 m

Electrical properties

Type of charging current	AC 3-phase
Charging power	11 kW
Charge current	16 A
Charging voltage	400 V AC

Charging technology set

Type of charging point	AC infrastructure socket outlet, 12 V locking actuator, self-closing IP54 protective cover
Charging controller	Basic AC charging controller, preconfigured
Locking release in the event of mains failure	Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Residual current monitoring module	1-channel RCM
Wiring diagram	Including download of sample E-Plan
Set consists of	1405213 EV-T2M3SE12-3AC20A-0,7M2,5E10
	1405217 EV-T2SC
	1622452 EV-CC-AC1-M3-CBC-SER-HS
	1622450 EV-RCM-C1-AC30-DC6
	3208760 PT 16-TWIN N
	3208773 PT 16-TWIN N BU
	3208786 PT 16-TWIN N-PE
	3211813 PT 6
	3211819 PT 6 BU
	3211822 PT 6-PE
	3209510 PT 2,5
	3209549 PT 2,5-TWIN
	3209552 PT 2,5-TWIN BU
	3025040 ZFK 6-DREHSI (5X20)
	3005950 FBS 2-12
	3030174 FBS 3-5
	3030417 D-ST 2,5
	3030488 D-ST 2,5-TWIN
	3212044 D-PT 6
	3208799 D-PT 16-TWIN N
	3022276 CLIPFIX 35-5

Environmental Product Compliance

China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Articles in set

Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible with Infrastructure Plugs, Type 2, IEC 62196-2, 20 A / 480 V (AC), 12 V Locking actuator, Single wires, length: 0.7 m, Rear panel mounting, Rear protective cover screw connection

Self-closing protective cover for infrastructure socket outlet, Type 2, IEC 62196-2, Front mounting, screwed on the front, Rear protective cover screw connection, M5 thread

The EV-CC-AC1-M3-CBC-SER-HS charging controller with housing for DIN rail mounting is used for charging electric vehicles at 3-phase AC networks according to IEC 61851-1, Mode 3. All charging functions, comprehensive configuration settings as well as a locking controller are already integrated.

The residual current module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current circuit breaker) is protected against potential DC residual currents. A 1 or 2-channel product version is available.

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Push-in connection, number of connections: 3, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, height: 53.3 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Push-in connection, number of connections: 3, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, height: 53.3 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

Ground modular terminal block, connection method: Push-in connection, number of connections: 3, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, height: 53.3 mm, color: green-yellow, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, height: 42.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, height: 42.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

Ground modular terminal block, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, height: 42.2 mm, color: green-yellow, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 2, number of positions: 1, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.3 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 3, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 3, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

Spring-cage terminal block-fuse terminal block for cartridge fuse inserts with screw cap, cross section: 0.5 - 6 mm², width: 12 mm, color: black

Plug-in bridge, pitch: 12 mm, number of positions: 2, color: red

Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red

End cover, length: 48.6 mm, width: 2.2 mm, height: 29.1 mm, color: gray

End cover, length: 60.5 mm, width: 2.2 mm, height: 29 mm, color: gray

End cover, length: 57.7 mm, width: 2.2 mm, height: 36 mm, color: gray

End cover, length: 100.2 mm, width: 2.2 mm, height: 46 mm, color: gray

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray

Classifications

eCl@ss 10.0.127144792eCl@ss 9.027144792

ETIM 5.0EC001321

Datasheet - PDF

▲

Title:	Size:	Type:
PDF CATALOG PHOENIX CHARGING TECHNOLOGY ELECTROMOBILITY EN.pdf	6 Mbytes

Reviews (0) ▲

No customer reviews for the moment.

Add Review

Add Review

hide form

Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy? Yes No

	Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

5 / 5 merci beaucoup

— sotitradim 11/29/2025
Customer rating:

Product: SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON ELEC
4 / 5 Amazing to use it

— B rahul 10/04/2025
Customer rating:

Product: 661601 LEGRAND URA21LED 70LM 1H IP42 NP
5 / 5 good

— B rahul 09/18/2025
Customer rating:

Product: 31295 WÖHNER Class CC 1p, 30A / 600V fus
5 / 5 Usefull product

— B rahul 09/18/2025
Customer rating:

Product: 2CSF202004R1250 ABB FH202 AC-25/0,03 Residual

EV-SET-T2AC-BAS-RCM1-20ASE12 1628080 PHOENIX CONTACT Set

Viewed products

EV-SET-T2AC-BAS-RCM1-...

7ML5728-1JB21-1EA0...

XPBM2006 102053...