Best sellers

▲

More info

Key Commercial Data

Orderkey	1628081
Packing unit	1 pc
Note	Made to Order (non-returnable)
Catalog page	Page 769 (C-2-2017)
GTIN	4055626379081
Weight per Piece (excluding packing)	9,169.000 g
Custom tariff number	85366990
Country of origin	DE (Germany)

Product definition

Product type	TWIN charging technology set starter kit for easy assembly of a charging station
Type	TWIN
Standards/regulations	IEC 62196-2
	IECˆ61851-1
Charging standard	Type 2
Charging mode	Mode 3, Case C
Note	Set of all Phoenix Contact charging technology products and terminal blocks with recommendations for further components required (charging contactor, safety equipment)
	The installation and startup of this device may only be performed by an electrically skilled person. Observe the applicable national standards and regulations.
	The individual components bear a CE marking if legally required.
Number of supported charging points	2

Dimensions

Conductor length	5.00 m

Electrical properties

Type of charging current	AC 3-phase
Charging power	22 kW
Charge current	32 A
Charging voltage	400 V AC

Charging technology set

Type of charging point	AC charging cable with Vehicle Connector, open cable ends, protective caps, holders (park positions)
Charging controller	Advanced AC charging controller
Residual current monitoring module	2-channel RCM
Wiring diagram	Including download of sample E-Plan
Set consists of	1627355 EV-T2G3C-3AC32A-5,0M6,0ESBK01
	1624148 EV-T2AC-PARK
	2902802 EM-CP-PP-ETH
	1622451 EV-RCM-C2-AC30-DC6
	2900305 PLC-RPT-230UC/21
	3208760 PT 16-TWIN N
	3208773 PT 16-TWIN N BU
	3208786 PT 16-TWIN N-PE
	3211813 PT 6
	3211819 PT 6 BU
	3211822 PT 6-PE
	3209510 PT 2,5
	3209549 PT 2,5-TWIN
	3209552 PT 2,5-TWIN BU
	3025040 ZFK 6-DREHSI (5X20)
	3005950 FBS 2-12
	3030174 FBS 3-5
	3030417 D-ST 2,5
	3030488 D-ST 2,5-TWIN
	3212044 D-PT 6
	3208799 D-PT 16-TWIN N
	3022276 CLIPFIX 35-5

Environmental Product Compliance

China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Articles in set

AC charging cable with Vehicle Connector, open cable end, with protective cap, C-Line black / gray, Type 2, IEC 62196-2, 32 A / 480 V (AC), design line C-Line, cable: 5 m, black, straight, mating face: black, handle area: gray

Retainer for Vehicle Connector as parking position at charging stations (EVSE), Type 2, IEC 62196-2, Front mounting

EV charge control is used to charge electrical vehicles on the 3-phase AC mains power supply according to IEC 61851-1 Mode 3. All necessary control functions are integrated. Additional functions are available for various charging applications.

The residual current module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current circuit breaker) is protected against potential DC residual currents. A 1 or 2-channel product version is available.

PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 230 V AC/220 V DC

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Push-in connection, number of connections: 3, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, height: 53.3 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Push-in connection, number of connections: 3, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, height: 53.3 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

Ground modular terminal block, connection method: Push-in connection, number of connections: 3, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, height: 53.3 mm, color: green-yellow, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, height: 42.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, height: 42.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

Ground modular terminal block, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, height: 42.2 mm, color: green-yellow, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 2, number of positions: 1, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.3 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 3, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 3, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

Spring-cage terminal block-fuse terminal block for cartridge fuse inserts with screw cap, cross section: 0.5 - 6 mm², width: 12 mm, color: black

Plug-in bridge, pitch: 12 mm, number of positions: 2, color: red

Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red

End cover, length: 48.6 mm, width: 2.2 mm, height: 29.1 mm, color: gray

End cover, length: 60.5 mm, width: 2.2 mm, height: 29 mm, color: gray

End cover, length: 57.7 mm, width: 2.2 mm, height: 36 mm, color: gray

End cover, length: 100.2 mm, width: 2.2 mm, height: 46 mm, color: gray

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray

Classifications

eCl@ss 10.0.127144792eCl@ss 9.027144792

ETIM 5.0EC001321

Datasheet - PDF

▲

Title:	Size:	Type:
PDF CATALOG PHOENIX CHARGING TECHNOLOGY ELECTROMOBILITY EN.pdf	6 Mbytes

Reviews (0) ▲

No customer reviews for the moment.

Add Review

Add Review

hide form

Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy? Yes No

	Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

5 / 5 merci beaucoup

— sotitradim 11/29/2025
Customer rating:

Product: SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON ELEC
4 / 5 Amazing to use it

— B rahul 10/04/2025
Customer rating:

Product: 661601 LEGRAND URA21LED 70LM 1H IP42 NP
5 / 5 good

— B rahul 09/18/2025
Customer rating:

Product: 31295 WÖHNER Class CC 1p, 30A / 600V fus
5 / 5 Usefull product

— B rahul 09/18/2025
Customer rating:

Product: 2CSF202004R1250 ABB FH202 AC-25/0,03 Residual

EV-SET-T2AC-ADV-RCM2-32AC5MES 1628081 PHOENIX CONTACT Set

Viewed products

EV-SET-T2AC-ADV-RCM2-...

7ML5662-0BB00-0JD1...

ESAT0808...