No products
Product successfully added to your shopping cart
View larger
ES-FT-BPC-B 16-25 OG 1130816 PHOENIX CONTACT Connector, Family of articles: BPC, color: orange, number of po..
ES-FT-BPC-B 16-25 OG
1130816
PHOENIX_CONTACT
15
Connector, Family of articles: BPC, color: orange, number of poles: 1, nominal voltage: 1500, assigned current: 120 A, Connection type: Screw connection
High voltage connector for new energy storage system, rated voltage: 1500 V, assigned current: 120 A, wiring method: crimping; contact surface: silver: orange positive pole, black negative pole; with male connector and female connector.
Connector, Range of articles: BPC, color: orange, number of positions: 1, rated voltage: 1500, rated current: 120 A, Connection method: Screw connection, Contact connection type: Pin
Connectors > Modular connector (industrial connector)
Field Device Connectors (FDC)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲| Safety note | |
| Safety note | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. | |
| WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. | |
| • The products are suitable for applications in plant, controller, and electrical device engineering. | |
| • Assembled products may not be manipulated or improperly opened. | |
| • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). | |
| • When using the product in direct connection with third-party manufacturers, the user is responsible. | |
| • For operating voltages > 50 V AC, conductive connector housings must be grounded | |
| • Ensure that the protective or functional ground has been properly connected. | |
| • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product | |
| • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. | |
| • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products | |
| • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). | |
| • Operate the connector only when it is fully plugged in and interlocked. | |
| • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. | |
| • Observe the minimum bending radius of the cable. Lay the cable without twisting it. | |
| Product type | Connectors for energy storage |
| Product family | BPC |
| Number of positions | 1 |
| Insulation characteristics | |
| Degree of pollution | 2 |
| Rated voltage (III/2) | 1500 V DC |
| Nominal voltage ATD | 1500 (III/2) in accordance with IEC 61984 |
| 1000 in accordance with UL 4128 | |
| Rated current | 120 A (with 25 mm² conductor cross-section, in accordance with IEC 61984) |
| 76 A (with 16 mm² conductor cross-section, in accordance with IEC 61984) | |
| 120 A (with AWG 4, in accordance with UL 4128) | |
| Contact resistance | ≤ 5 mΩ |
| Nominal voltage UN | 1000 V (in accordance with UL 4128) |
| Connection method | Screw connection |
| Cross section AWG | (converted acc. to IEC) |
| Color | orange |
| Material | Polyamide |
| Copper | |
| Silicon | |
| Flammability rating according to UL 94 | V0 |
| Tightening torque, union nut | 3.00 Nm |
| Cable pull-out force | ≥ 10 N |
| Mechanical data | |
| Insertion/withdrawal cycles | 100 |
| Insertion force | ≤ 75 N |
| Withdrawal force | ≥ 10 N |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP65 (The panel is feed-through hole) |
| Degree of protection (not plugged in) | IP20 |
| Degree of protection | IP65 |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Standards/specifications | IEC 61984:2008 |
| EN 61984:2008 | |
| UL 4128 | |
| PPP 51090A |
| Connection method | Screw connection |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX CONNECTORS EN.pdf | 68 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.