QUINT-PS-100-240AC/24DC/40 2938879 PHOENIX CONTACT DIN rail power supply unit 24 V DC/40 A, primary switched.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

QUINT-PS-100-240AC/24DC/40 2938879 PHOENIX CONTACT DIN rail power supply unit 24 V DC/40 A, primary switched..

QUINT-PS-100-240AC/24DC/40

2938879

PHOENIX_CONTACT

DIN rail power supply unit 24 V DC/40 A, primary switched-mode, 1-phase.

More details


Programmable Logic Controllers Plcs

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Uninterruptible power supply units - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

Related products

More info



Product description

QUINT POWER power supply units for plant and special engineering reliably start heavy loads with high inrush currents using the POWER BOOST. Thanks to the wide-range input and extensive package of approvals, they can be used in all sectors of industry the world over. The switching output or floating relay contact are used for remote diagnostics.

Dimensions

Width240 mm
Height130 mm
Depth125 mm
Width with alternative assembly122 mm
Height with alternative assembly130 mm
Depth with alternative assembly243 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)95 % (at 25 °C, non-condensing)
Noise immunityEN 61000-6-2:2005

Input data

Nominal input voltage range110 V AC ... 240 V AC
Input voltage range85 V AC ... 264 V AC (Derating < 100 V DC: 2.5%/V)
90 V DC ... 350 V DC (Derating < 110 V DC: 2.5%/V)
AC frequency range45 Hz ... 65 Hz
Frequency range DC0 Hz
Nominal power consumption960 W
Inrush surge current< 15 A (typical)
Power failure bypass> 20 ms (120 V AC)
> 20 ms (230 V AC)
Input fuse20 A (fast blow, internal)
Choice of suitable circuit breakers16 A ... 20 A (Characteristics B, C, D, K)
Type of protectionTransient surge protection
Protective circuit/componentVaristor

Output data

Nominal output voltage24 V DC ±1 %
Setting range of the output voltage22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current40 A (-25 °C ... 60 °C)
POWER BOOST45 A (-25°C ... 40°C permanent )
Derating60 °C ... 70 °C (2.5%/K)
Connection in parallelYes, for redundancy and increased capacity
Connection in seriesYes
Max. capacitive loadUnlimited
Active current limitationApprox. IBOOST = 45 A (for short-circuit)
Control deviation< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple< 30 mVPP (with nominal values)
Output power960 W
Typical response time< 1 s
Peak switching voltages nominal load< 50 mVPP (20 MHz)
Maximum power dissipation in no-load condition28 W
Power loss nominal load max.80 W

General

Net weight3.5 kg
Operating voltage displayGreen LED
Efficiency> 92 % (for 230 V AC and nominal values)
Insulation voltage input/output3 kV AC (type test)
2 kV AC (routine test)
Protection classI (with PE connection)
MTBF (IEC 61709, SN 29500)> 500000 h
Mounting positionhorizontal DIN rail NS 35, EN 60715
Assembly instructionsCan be aligned: Horizontally 0 mm, vertically 50 mm

Connection data, input

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.10
Stripping length7 mm
Screw threadM3

Connection data, output

Connection methodScrew connection
Conductor cross section solid min.0.5 mm²
Conductor cross section solid max.16 mm²
Conductor cross section flexible min.0.5 mm²
Conductor cross section flexible max.10 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.6
Stripping length10 mm
Screw threadM4

Signaling

Output nameDC OK active
Output descriptionUOUT > 0.9 x UN: High signal
Maximum switching voltage≤ 24 V
Output voltage+ 24 V DC (Signal)
Maximum inrush current≤ 20 mA (short-circuit resistant)
Continuous load current≤ 20 mA
Status display"DC OK" LED green
Note on status displayUOUT < 0.9 x UN: LED flashing
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.10
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Screw threadM3
Output nameDC OK floating
Output descriptionRelay contact, UOUT > 0.9 x UN: Contact closed
Maximum switching voltage≤ 30 V AC/DC
Maximum inrush current≤ 1 A
Continuous load current≤ 1 A
Status display"DC OK" LED green

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2938879-QUINT-PS-100-240AC/24DC/40 English 167 Kbytes PHOENIX CONTACT-2938879-QUINT-PS-100-240AC/24DC/40

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.