No products
Product successfully added to your shopping cart
View larger
D32PC 2,2/ 5-5,08-X 1376525 PHOENIX CONTACT Connector for printed circuit board, color: black, rated current..
D32PC 2,2/ 5-5,08-X
1376525
PHOENIX_CONTACT
50
Connector for printed circuit board, color: black, rated current: 8 A, rated voltage (III/2): 320 V, contact type: Female, number of rows: 1, number of poles: 5, item family: D32PC 2.2/, pitch: 5.08 mm, connection type: crimped connection, driver/printed circuit board connection direction: 0°, clamping hook: - without clamping hook, Plug-in System: CONNEXIS D, Locking: Locking by Lace, Fixing Type: Lace Flange, Packing Type: Boxed Packaging
PCB Connector, Color: Black, Rated Current: 8 A, Rated Voltage (III/2): 320 V, Contact Connection Type: Female, Number of Rows: 1, Number of Poles: 5, Item Family: D32PC 2.2/, Pitch: 5.08mm, Connection Type: Crimp Connection, Driver/PCB Connection Direction: 0°, Clamping Hook: - without clamping hook, plug-in system: CONNEXIS D, locking: Locking by socket, fixing type: Lace flange, packing type: boxed packaging
Home > PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲| Product Line | CONNEXIS Connectors M |
| Product Type | Printed Circuit Board Connector |
| Product Family | D32PC 2.2/ |
| Number of poles | 5 |
| Step | 5.08 mm |
| Number of rows | 1 |
| Nominal Current IN | 8 A |
| Nominal voltage UN | 320 V |
| Degree of pollution | 3 |
| Contact resistance | 0.9 mΩ |
| Sizing voltage (III/3) | 250 V |
| Dimensioning transient voltage (III/3) | 4 kV |
| Dimensioning voltage (III/2) | 320 V |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Nominal voltage (II/2) | 500 V |
| Dimensioning transient voltage (II/2) | 4 kV |
| Blockade | |
| Locking system | Lace lock |
| Clamping flange | Lace Flange |
| Connecting Conductors | |
| Connection type | Crimp connection |
| Connection Direction Driver/PCB | 0 ° |
| AWG Conductor Section | 28 ... 14 |
| Peel Length | 4.5 mm |
| Material data - housing | |
| Color (Housing) | Black (9005) |
| Insulating material | PBT |
| Insulating material group | Ii |
| CTI according to IEC 60112 | 400 ≤ CTI |
| Flammability class according to UL 94 | V0 |
| Dimension Scheme |  |
| Step | 5.08 mm |
| Width [w] | 39.46 mm |
| Height [h] | 7.15 mm |
| Length [l] | 22.8 mm |
| Note on contact | These are connectors without switching capability (COC) according to DIN EN 61984. In the event of use as prescribed, they must not be plugged in or unplugged under voltage or load. |
| Tensile strength of crimped joints | |
| Result | Approved Test |
| Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | AWG 28 / flexible / > 11 N |
| Forces when plugging in and unplugging | |
| Result | Approved Test |
| Number of cycles | 25 |
| Plug-in force approx. | 3 N |
| Power when unplugging by pole approx. | 4 N |
| Resistance of the signs | |
| Test Specification | DIN EN 60068-2-70:1996-07 |
| Result | Approved Test |
| Polarization & Coding | |
| Test Specification | DIN EN 60512-13-5:2006-11 |
| Result | Approved Test |
| Eye Exam | |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Result | Approved Test |
| Dimensional Examination | |
| Test Specification | DIN EN 60512-1-2:2003-01 |
| Result | Approved Test |
| Vibration test | |
| Test Specification | DIN EN 60068-2-6 (VDE 0468-2-6):2008-10 |
| frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Sweep speed | 50 m/s² (60.1 Hz ... 150 Hz) |
| Test duration per axis | 2.5 h |
| Durability Test | |
| Test Specification | DIN EN 60512-9-1 (VDE 0687-512-9-1):2010-12 |
| Bearable shock voltage at sea level | 4.8 kV |
| Contact Resistance R1 | 0.9 mΩ |
| Contact Resistance R2 | 1 mΩ |
| Plug Cycles | 25 |
| Climate Essay | |
| Test Specification | DIN EN ISO 6988:1997-03 |
| Corrosion fatigue | 0.2 dm3UNDER2in 300 dm3/40 °C/1 cycle |
| Thermal stress | 105 °C/168 h |
| Bearable AC voltage | 2.21 kV |
| Crash | |
| Test Specification | DIN EN 60068-2-27 (VDE 0468-2-27):2010-02 |
| Shock Type | Semi-sinusoid |
| Acceleration | 30g |
| Duration of the crash | 11 ms |
| Test Directions | X, Y, and Z axes (pos. and neg.) |
| Environmental conditions | |
| Ambient Temperature (Service) | -55 °C ... 105 °C (depending on the rating curve) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Thermal Test | Test Group C | |
| Test Specification | DIN EN 60512-5-1:2003-01 |
| Number of poles tested | 10 |
| Insulation resistance | |
| Test Specification | DIN EN 60512-3-1:2003-01 |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Creepage Lines & Air Isolation Distances | | |
| Test Specification | IEC 60664-1:2020-05 |
| Insulating material group | Ii |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI ≥400 to <600 |
| Sizing Insulation Voltage (III/3) | 250 V |
| Nominal transient voltage (III/3) | 4 kV |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Minimum creepage line value (III/3) | 3.6 mm |
| Sizing Insulation Voltage (III/2) | 320 V |
| Nominal transient voltage (III/2) | 4 kV |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| Minimum creepage line value (III/2) | 3 mm |
| Sizing Insulation Voltage (II/2) | 500 V |
| Nominal transient voltage (II/2) | 4 kV |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum creepage line value (II/2) | 3.6 mm |
| Type of packaging | Boxed Packaging |
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.