No products
Product successfully added to your shopping cart
View larger
CSS 0.25-1/3 1201132 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..
CSS 0.25-1/3
1201132
PHOENIX_CONTACT
Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 0.25 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, single-phase load input
Devices for distribution board-/surface mounting > Speed controller
INTERFACE Components (IF)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲| Product Type | Variable Speed Starter |
| Product Family | CONTACTRON |
| Operating elements | Key |
| Selector | |
| Insulation characteristics | |
| Degree of pollution | 2 |
| Number of phases | 1 |
| Network | |
| Number of phases | 1 |
| Input voltage | 230 V AC |
| 240 V AC | |
| Input voltage range | 110 V AC ... 240 V AC -15 % ... +10 % |
| Frequency | 47 Hz ... 63 Hz |
| Rated current | 3.5 A (without mains choke) |
| 3.3 A (with mains choke) | |
| Motor rated power | 0.25 kW |
| Apparent power | 0.7 kVA |
| Rated output current (IN) | 1.7 A (4 kHz) |
| 1.4 A (8 kHz) | |
| 0.9 A (16 kHz) | |
| Output Frequency | 0 Hz ... 500 Hz |
| Power dissipation | 18 W (2 kHz) |
| 21 W (4 kHz) | |
| 20 W (8 kHz) | |
| 19 W (16 kHz) | |
| 9 W (Standby) | |
| Output current | ≤ 2.55 A (180 s) |
| ≤ 1.275 A (180 s, during recovery time) | |
| ≤ 3.06 A (15 s) | |
| ≤ 0.85 A (15 s, during recovery time) | |
| Reset Time | 150 s (180 s) |
| 12 s (15 s) | |
| Overload Time | 30 s (180 s) |
| 3 s (15 s) | |
| Discharge time | 3 min. (Intermediate Circuit Capacitors) |
| Switching | |
| Output Name | Relay output |
| Contact Switching Type | 1 diverter contact |
| Max. switchable voltage | 125 V AC |
| 30 V DC | |
| Max. inrush current | 3 A |
| Min. Insertion Current | 10 mA (5 V DC) |
| Conductor cross-section AWG | (converted according to IEC) |
| Power terminals | |
| Link | Push-in connection |
| Stripping length | 10 mm |
| Rigid conductor cross-section | 0.2 mm² ... 6 mm² |
| Flexible conductor cross-section | 0.2 mm² ... 6 mm² |
| 0.2 mm² ... 4 mm² (with lug) | |
| Conductor cross-section AWG | 24 ... 10 |
| Control Terminals | |
| Link | Push-in connection |
| Stripping length | 10 mm |
| Rigid conductor cross-section | 0.2 mm² ... 1.5 mm² (with lug) |
| Flexible conductor cross-section | 0.2 mm² ... 1.5 mm² |
| 0.2 mm² ... 0.75 mm² | |
| Conductor cross-section AWG | 24 ... 16 |
| Hole | |
| Diameter | 5.5 mm |
| width | 35 mm |
| height | 210 mm |
| Depth | 175 mm |
| length | ≤ 50 m (Motor cable length (EMC category C2 compliant)) |
| ≤ 50 m (Motor cable length (EMC category C3 compliant)) | |
| ≤ 50 m (Motor cable length (without EMC compliance)) | |
| Environmental conditions | |
| Degree of protection (IP) | Ip20 |
| Degree of protection (NEMA) | NEMA 1 |
| Ambient temperature (operating) | -20 °C ... 55 °C (without current derating) |
| -20 °C ... 60 °C (with linear current derating) | |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Elevated position | ≤ 2000 m |
| > 2000 m (with derating) | |
| Permissible humidity (operation) | 90 % (non-condensing) |
| Permissible humidity (storage/transport) | 95 % (non-condensing) |
| Shocks (exercise) | 15g, 11ms |
| Vibration (exercise) | 0.075 mm / 1g |
| Air pressure (operation) | 86 kPa ... 106 kPa |
| Air pressure (transport and storage) | 70 kPa ... 106 kPa |
| Safety Integrity Level (SIL, IEC 61800-5-2) | |
| Marking | 3 |
| Performance Level (EN ISO 13849) | |
| Marking | and |
| Category (ISO 13849) | |
| Marking | 4 |
| Standards/Provisions | IEC 61800-5-1 |
| IEC 61800-3 |
| Mounting type | Rail Mounting |
| Wall Mounting |
| Feature Name | Feature Value |
|---|---|
| Mounting method (EF000003) | Other |
| Colour (EF000007) | Grey |
| RAL-number (EF000116) | 7042 |
| Nominal current (EF000001) | 3.5 A |
| Number of phases (EF000351) | 1 |
| Power control stepless (EF000661) | Yes |
| Number of steps (EF002426) | 2 |
| Basic element without cover (EF008182) | No |
| Method of operation (EF000006) | Push button/touch control button |
| Lighting (EF000134) | None |
| Switching contact (EF001141) | Yes |
| With temperature sensor (EF006034) | No |
| Height (EF000040) | 210 mm |
| Width (EF000008) | 35 mm |
| Depth (EF000049) | 175 mm |
| Degree of protection (IP) (EF005474) | IP20 |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 29 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.