Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
Rated current at 40°C
8 A (Contact 5: 2 A)
Number of positions
> 10 GΩ
A - standard
M12 connector IEC 61076-2-101
Conductor cross section
Conductor cross section AWG
0.4 Nm (M12 knurl)
1 Nm ... 1.4 Nm (Pressure nut with coupling sleeve)
0.4 Nm (Connector with coupling sleeve)
0.2 Nm (Screw terminal blocks)
The wires can be connected both with ferrules and without ferrules
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.