The terminal is designed for use within an Inline station. If the maximum load of the bus coupler for the communications power (UL) is reached, this power terminal can be used to again provide this voltage. To this end, 24 V DC voltage (U24V) is applied to the terminal from which the communications power (UL) is generated.
Inline data jumper
Inline local bus
24 V DC
I/O voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Max. current consumption
274 mA (at nominal voltage)
electrical/thermal overload protection, included in scope of delivery
Type of protection
Input protective diodes (can be destroyed by permanent overload)Pulse loads up to 1500 W are short circuited by the input protective diode.