No products
Product successfully added to your shopping cart
View larger
BLT-T2-1S-305-UT 1078433 PHOENIX CONTACT Type 2 surge arrester for universal mounting in lights, cable conne..
BLT-T2-1S-305-UT
1078433
PHOENIX_CONTACT
10
Type 2 surge arrester for universal mounting in lights, cable connection boxes, installation boxes, sill-type trunking, underfloor installations or direct installation in the end device. Specifically for insulation class I with optical fault indication. Installation in branch or through wiring. Version: 230 V AC
Type 2 surge arrester for universal mounting on lights, cable junction boxes, installation boxes, wall channels, underfloor installations or directly on terminal equipment. Special for insulation protection class I with optical defect notification. Installation in branch or pass-through wiring. Construction: 230 V AC
Earthing, lightning and surge protection > Surge protection device for power supply systems
Trabtech (TT)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲Key Commercial Data
| Orderkey | 1078433 |
|---|---|
| Packing unit | 1 |
| Catalog page | Page 76 (C-4-2019) |
| GTIN | 4055626793344 |
| Custom tariff number | 85354000 |
Ambient conditions
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (amsl (above mean sea level)) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (operation) | 5g (5 ... 500 Hz / 2.5 h / X, Y, Z) |
General
| IEC test classification | II / III |
|---|---|
| EN type | T2 / T3 |
| IEC power supply system | TN-S |
| TT | |
| SPD failure behavior | OCM |
| Accessibility | Accessible |
| Installation location of the disconnect device | Internal |
| Mode of protection | L-N |
| L-PE | |
| N-PE | |
| Mounting type | 4 mm screw |
| Color | light grey RAL 7035 |
| Housing material | PA 6.6 |
| Degree of pollution | 2 |
| Distance between live and grounded parts | 3 mm |
| Flammability rating according to UL 94 | V-0 |
| Protection class | I |
Protective circuit
| Nominal voltage UN | 100 V AC ... 230 V AC (TN-S) |
|---|---|
| 100 V AC ... 230 V AC (TT) | |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous operating voltage UC(L-N) | 305 V AC |
| Maximum continuous operating voltage UC(L-PE) | 265 V AC |
| Maximum continuous voltage UC(N-PE) | 265 V AC |
| Rated load current IL | 16 A |
| Residual current IPE | ≤ 5 µA |
| Nominal discharge current In(8/20) µs (L-N) | 5 kA |
| Nominal discharge current In(8/20) µs (L-PE) | 5 kA |
| Nominal discharge current In(8/20) µs (N-PE) | 10 kA |
| Maximum discharge current Imax(8/20) µs (L-N) | 10 kA |
| Maximum discharge current Imax(8/20) µs (L-PE) | 10 kA |
| Maximum discharge current Imax(8/20) µs (N-PE) | 20 kA |
| Combination wave UOC(L-N) | 10 kV |
| Combination wave UOC(L-PE) | 10 kV |
| Combination wave UOC(N-PE) | 20 kV |
| Total discharge current Itotal(8/20) µs | 20 kA |
| Follow current interrupt rating Ifi(N-PE) | 100 A () |
| Short-circuit current rating ISCCR | 10 kA (6 A gG backup fuse) |
| 3 kA (16 A MCB B/C backup fuse) | |
| Voltage protection level Up(L-N) | ≤ 1.3 kV |
| Voltage protection level Up(L-PE) | ≤ 1.5 kV |
| Voltage protection level Up(N-PE) | ≤ 1.5 kV |
| TOV behavior at UT(L-N) | 336 V AC (5 s / withstand mode) |
| 440 V AC (120 min / safe failure mode) | |
| TOV behavior at UT(L-PE) | 440 V AC (5 s / withstand mode) |
| 440 V AC (120 min / safe failure mode) | |
| TOV behavior at UT(N-PE) | 1200 V AC (200 ms / safe failure mode) |
| Response time tA(L-N) | ≤ 25 ns |
| Response time tA(L-PE) | ≤ 100 ns |
| Response time tA(N-PE) | ≤ 100 ns |
| Max. backup fuse with V-type through wiring | 16 A (MCB B/C) |
| Max. backup fuse with branch wiring | 16 A (MCB B/C) |
Connection data
| Connection method | Screw terminal blocks |
|---|---|
| Screw thread | M3 |
| Tightening torque | 0.6 Nm |
| Stripping length | 8 mm |
| 2 conductors with same cross section, stranded min. | 0.2 mm² |
| 2 conductors with same cross section, stranded max. | 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| 2 conductors with same cross section, solid min. | 0.2 mm² |
| 2 conductors with same cross section, solid max. | 1.5 mm² |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
Classifications
| Feature Name | Feature Value |
|---|---|
| System configuration DC (EF009926) | No |
| System configuration IT (EF009927) | No |
| System configuration TN (EF009928) | No |
| System configuration TN-C (EF009929) | No |
| System configuration TN-C-S (EF009933) | No |
| System configuration TN-S (EF009930) | Yes |
| System configuration TT (EF009931) | No |
| System configuration other (EF009932) | No |
| Nominal discharge surge current (8/20) (EF004214) | 5 kA |
| Max. discharge surge current (8/20) (EF012274) | 10 kA |
| Max. continuous voltage AC (EF004198) | 305 V |
| Voltage protection level (EF003525) | 1.5 kV |
| Voltage protection level L-N (EF004236) | 1.3 kV |
| Voltage protection level N-PE (EF008796) | 1.5 kV |
| Max. overcurrent protection device, parallel connection (fuse) (EF015962) | 16 A |
| Max. overcurrent protection device, series connection (fuse) (EF015963) | 16 A |
| Short-circuit breaking capacity (Isccr) (EF012627) | 10 kA |
| Leakage-current free (EF016002) | No |
| Max. conductor cross section solid (solid, stranded) (EF008827) | 0.2 mm² |
| Max. conductor cross section flexible (fine-strand) (EF008828) | 2.5 mm² |
| Signalling at the device (EF004241) | Optic |
| Category type 2 (EF004230) | Yes |
| Degree of protection (IP) (EF005474) | IP20 |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX PROTECTION EN .pdf | 27 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.