Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard signals. The measuring transducer supports fault monitoring and NFC communication.
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
Number of inputs
Voltage input signal
0 V ... 10 V
Input resistance of voltage input
approx. 1 MΩ
Number of outputs
Current output signal
0 mA ... 20 mA
Max. output current
Load/output load current output
≤ 600 Ω (at 20 mA)
Nominal supply voltage
24 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption
25 mA (24 V DC)
54 mA (12 V DC)
≤ 800 mW (at 9.6 V DC)
Single conductor/terminal point, solid, with ferrule, min.
Single conductor/terminal point, solid, with ferrule, max.
Single conductor/terminal point, solid, without ferrule, min.
Single conductor/terminal point, solid, without ferrule, max.
Conductor cross section flexible min.
Conductor cross section flexible max.
Min. AWG conductor cross section, flexible
Max. AWG conductor cross section, flexible
No. of channels
Maximum transmission error
0.1 % (of final value)
Maximum temperature coefficient
Limit frequency (3 dB)
approx. 30 Hz
Step response (10-90%)
approx. 10 ms
Reinforced insulation in accordance with IEC 61010-1
Rated insulation voltage
300 V (effective)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Conformance with EMC Directive 2004/108/EC
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.