PLC-RPT- 72UC/21HC/RW 2900325 PHOENIX CONTACT PLC-INTERFACE for railway applications and high continuous cur.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PLC-RPT- 72UC/21HC/RW 2900325 PHOENIX CONTACT PLC-INTERFACE for railway applications and high continuous cur..






Ship on today

PLC-INTERFACE for railway applications and high continuous currents, consisting of basic terminal block with push-in connection and plug-in miniature relay, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 PDT, input voltage 72 V DC

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
10+51,15 €
20+50,67 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C (Temperature class TX)
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN72 V DC
Input voltage range in reference to UN0.7 ... 1.25
Typical input current at UN6 mA
Typical response time5 ms
Typical release time11 ms
Coil voltage48 V DC
Protective circuitBridge rectifier Bridge rectifier
Free-wheeling diode Damping diode
Surge protection
RCZ filter
Wide-range electronics
Operating voltage displayYellow LED

Contact side

Contact type1 PDT
Contact materialAgNi
Maximum switching voltage250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Minimum switching voltage12 V (at 10 mA)
Min. switching current10 mA (at 12 V)
Maximum inrush current30 A (300 ms)
Limiting continuous current10 A (With inserted bridge 2967691)
Interrupting rating (ohmic load) max.240 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
75 W (at 220 V DC)
2500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (24 V (DC13))
0.2 A (220 V (DC13))
6 A (230 V (AC 15))


Test voltage relay winding/relay contact5 kVrms (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT III (Relay)
IP20 (Relay socket)
Mechanical service lifeApprox. 3 x 107 cycles
Flammability rating according to UL 94V0
Standards/regulationsEN 50155 (VDE 0115 part 200)
EN 50178
IEC 62103
EN 61373
EN 50121
Rated surge voltage/insulation6 kV/Basic isolation
Rated insulation voltage250 V AC
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2900325-PLC-RPT- 72UC/21HC/RW English 140 Kbytes PHOENIX CONTACT-2900325-PLC-RPT- 72UC/21HC/RW

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review