SG-B2-K2CD-5 PANASONIC Safety door switch with key (2-positions), removable in LOCK position, 5m cable, 2NCx2 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SG-B2-K2CD-5 PANASONIC Safety door switch with key (2-positions), removable in LOCK position, 5m cable, 2NCx2

SG-B2-K2CD-5

PANASONIC

Safety door switch with key (2-positions), removable in LOCK position, 5m cable, 2NCx2

End of security stroke for door with key (2 positions), removable in LOCK position, cable 5m., 2NCx2

SG-B2-K2CD-5_Safety door switch with key_Safety door switch with key SG-B2

More details


Security limit switches - PANASONIC

Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Product NumberSG-B2-K2CD-5
Part NumberSG-B2-K2CD-5
ProductSafety door switch with key
Product nameSafety door switch with key SG-B2

ItemSpecifications
Product NumberSG-B2-K2CD-5
Part NumberSG-B2-K2CD-5
Contact arrangementpic02.jpg
Cable length5m
16.404 ft
Key removal positionC
(removable in LOCK position)
Applicable standardsEN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-19, UL 508, CSA C22.2 No.14
Applicable standards : Standards for useIEC 60204-1, EN 60204-1
Applicable directivesMachinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)
Operating condition : Ambient temperature-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉
Operating condition : Ambient humidity45 to 85 % RH
Operating condition : Pollution degree3 (Inside 2)
Operating condition : Altitude2,000 m 6,561.68 ft max.
Impulse withstand voltage (Uimp)2.5 kV
Rated insulation voltage (Ui)250 V
(Note): Ratings approved by UL, c-UL : 125 V
Thermal current (Ith)・2.5 A
・Ambient temperature :
-25 to +60 ℃ -13 to +140 ℉ : 2.5 A max.
+60 to +65 ℃ +140 to +149 ℉ : 1.5 A max.
+65 to +70 ℃ +149 to +158 ℉ : 1.0 A max.
Rated operational voltage (Ue) / Rated operational current (Ie)
Ue
30V125V250V
IeACResistive load (AC-12)-2.5A1.5A
Inductive load (AC-15)-1.5A0.75A
DCResistive load (DC-12)2.5A1.1A0.55A
Inductive load (DC-13)2.3A0.55A0.27A
Operating frequency900 operations/hour
Actuator operating speed0.05 to 1.0 m/sec.
B10D2,000,000
(ISO 13849-1 Annex C Table C.1)
Mechanical durability1,000,000 operations min. (GS-ET-19)
Rear unlocking button : 3,000 operations min. (Type SG-B2-□-L5)
Electrical durability100,000 operations min. (AC-12, 250 V 1 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(900 operations/hour)
Electric shock protection classClass II (IEC 61140)(Note), 回(double-insulated)
(Note): Basic insulation of 2.5 kV impulse withstand voltage is ensured between different contact circuits.
When both SELV (safety extra low voltage) or PELV (protective extra low voltage) circuits and other circuits (such as 230 V AC circuits) are used for the solenoid power and contact circuits at the same time, the SELV or PELV requirements are not met any more.
Interlock force1,400 N min. (GS-ET-19)(Note)
(500 N min. : SG-K24 actuator)
(Note): The actuator locking strength is rated at 1,400 N of static load. Do not apply a load higher than the rated value. When a higher load is expected to work on the actuator, provide an additional system consisting of another safety switch without lock (such as the SG-A1 safety switch) or a sensor to detect door opening and stop the machine.
Direct opening travel11 mm 0.433 in min. (actuator : SG-K21)
12 mm 0.472 in min. (for other actuators)
Direct opening force80 N min.
Contact resistance700 mΩ max. (initial value, 5 m 16.404 ft cable)
ProtectionIP 65 (IEC 60529)
Shock resistanceMalfunction : 100 m/s2, Destruction : 1,000 m/s2
Vibration resistanceMalfunction : 10 to 55 Hz, half amplitude 0.35 mm 0.014 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in
Conditional short-circuit current50 A (250 V)
Short-circuit protective deviceUse 250 V / 10 A fast acting type fuse
MaterialEnclosure : PA66
CableUL style 2464, No.22 AWG 12-core
Key : Operating specifications2 positions
Key : Mechanical durability100,000 operations min.
Key : Key operating durability10,000 operations min.
Key : Key tensile strength1.0 N・m min.
Key : Direct opening force0.6 N・m min.
Key : Direct opening degree60°min.
WeightApprox. 680 g

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.