Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
USF2CH16P SF2C-H16-P PANASONIC Ultra-slim Safety Light Curtain Typ2 (PLc SIL1), Hand Protection, protective ..
USF2CH16P
SF2C-H16-P
PANASONIC
Ultra-slim Safety Light Curtain Typ2 (PLc SIL1), Hand Protection, protective height 320 mm, PNP, cable-type 3m, IP67
Cat.2 Safety Barrier (PLd SIL2) Ultra-narrow, Hand Protection, protected height 320 mm, PNP, 3m cable, IP67
SF2C-H16-P_Ultra-slim Light Curtain [Type 2 PLc SIL1]_Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C_Hand protection type Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch)
Safety - PANASONIC > SF2B thru-beam safety sensors type 2 PLd SIL2, P - PANASONIC
Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Best sellers
▲More info
▲| Product Number | SF2C-H16-P |
| Part Number | SF2C-H16-P |
| Product | Ultra-slim Light Curtain [Type 2 PLc SIL1] |
| Details | Hand protection type Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch) |
| Product name | Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C |
| Item | Specifications |
|---|---|
| Product Number | SF2C-H16-P |
| Part Number | SF2C-H16-P |
| No. of beam channels | 16 |
| Protective height | 320 mm 12.598 in |
| Current consumption:Large multipurpose indicator lights off | Emitter: 30 mA or less Receiver: 30 mA or less |
| Current consumption:Large multipurpose indicator lights up | Emitter: 40 mA or less Receiver: 35 mA or less |
| PFHD | 3.73 × 10-9 (Note) Probability of dangerous failure per hour. |
| MTTFD | 100 years or more (Note) Mean time to dangerous failure. |
| Net weight (Total of emitter and receiver) | 400 g approx. |
| Applicable standards:International standard | IEC 61496-1 / 2 (Type 2), ISO 13849-1:2015 (Category 2, PLc), IEC 61508-1 to 3 (SIL 1) |
| Applicable standards:Japan | JIS B 9704-1 / 2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508-1 to 3 (SIL 1) |
| Applicable standards:Europe | EN 61496-1 (Type 2), EN ISO 13849-1:2015 (Category 2, PLc), EN 61508-1 to 3 (SIL 1), EN 55011, EN 50178, EN 61000-6-2 (Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Applicable standards:North America | ANSI / UL 61496-1 / 2 (Type 2), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 2), CAN / CSA C22.2 No.14, ANSI / RIA 15.06 (Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| Applicable regulations and certifications | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| Operating range | 0.1 to 3 m 0.328 to 9.843 ft |
| Beam pitch | 20 mm 0.787 in |
| Min. sensing object | ø25 mm ø0.984 in opaque object |
| Effective aperture angle | plus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Power voltage | 24 V DC plus or minus 20 % Ripple P-P 10 % or less |
| Control output(OSSD) | - Maximum source current: 200mA - Applied voltage: same as supply voltage (between the control output and +V) - Residual voltage: 2.5V or less (source current 200mA, when using 10m length cable) - Leakage current: 200micro A or less (power supply OFF condition) - Maximum load capacity: 2.2micro F (No load to maximum output current) - Load wiring resistance: 3Ω or less |
| Control output(OSSD):Operation mode | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) |
| Control output(OSSD):Protection circuit | Incorporated |
| Response time | OFF response: 20 ms or less ON response: 80 to 100 ms |
| Lockout output(SSD) | - Maximum sink current: 60mA - Applied voltage: same as supply voltage (between the lockout output and +V) - Residual voltage: 2.5V or less (source current 60mA, when using 10m length cable) - Leakage current: 200micro A or less (power supply OFF condition) - Maximum load capacity: 2.2micro F (No load to maximum output current) - Load wiring resistance: 3Ω or less |
| Lockout output(SSD):Operation mode | ON during normal operation, OFF during lockout (Note) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. |
| Lockout output(SSD):Protection circuit | Incorporated |
| Interference prevention function | Incorporated |
| Test input function | Incorporated |
| Large multi-purpose indicator function | Incorporated |
| Pollution degree | 3 |
| Operating altitude | 2, 000 m 6561.680 ft or less (Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Environmental resistance:Degree of protection | IP65, IP67 (IEC) |
| Environmental resistance:Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: - 25 to +60 ℃ - 13 to +140 ℉ |
| Environmental resistance:Ambient humidity | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Ambient illuminance | Incandescent light: 5,000 ℓx or less at the light-receiving face |
| Environmental resistance:Voltage withstandability | 1, 000 V AC for one min. between all supply terminals connected together and enclosure |
| Environmental resistance:Insulation resistance | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Environmental resistance:Vibration resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Environmental resistance:Shock resistance | 300 m / s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (Peak emission wavelength: 850 nm 0.034 mil) |
| Cable | 0.16 mm2 5-core heat-resistant PVC cable, 3 m 9.842 ft long |
| Cable extension | Extension up to total 50m is possible for 0.3mm2 or more, cable |
| Material | Enclosure: Polycarbonate alloy Sensing surface: Polycarbonate alloy MS-SFC-1 (Standard mounting bracket): Stainless steel (SUS) |
| Accessories | MS-SFC-1 (Standard mounting bracket): 1 set SF4C-TR25 (Test rod): 1 No. |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PANASONIC SENSORS EN.pdf | 31 Mbytes |
|
| PDF CATALOGUE PANASONIC EN .pdf | 15 Mbytes |
|
| Download general catalog |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.