HG-T1110 PANASONIC HG-T Laser Sensor Displacement. Head sensor close, without adjustment indicator beam, the..

HG-T1110

PANASONIC

HG-T Laser Sensor Displacement. Head sensor close, without adjustment indicator beam, the array of detection 10mm detection range of 0 to 500 mm, repeatability 1µm

HG-T1110_Sensor heads_Thru-beam Type Digital Displacement Sensor HG-T_Measurement width 10 mm 0.394 in / Slim type

More details


Laser Sensors - Spot Type - AN - PANASONIC

* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

* This article is restricted. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Product NumberHG-T1110
Part NumberHG-T1110
ProductSensor heads
DetailsMeasurement width 10 mm 0.394 in / Slim type
Product nameThru-beam Type Digital Displacement Sensor HG-T

ItemSpecifications
Product NumberHG-T1110
Part NumberHG-T1110
Regulatory complianceEMC Directive, RoHS Directive, FDA regulations
Applicable controllerHG-TC101 (-P), HG-TC111 (-P), HG-TC113
Position detection methodCMOS-based
Installation distance0 to 500 mm 0 to 19.685 in
Measurement width10 mm 0.394 in
Light sourceRed semiconductor laser: Class 1 [IEC / JIS / GB / FDA (Note)]
Maximum output: 0.3 mW, Peak emission wavelength: 655 nm
(Note)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).
Repeatability1 μm 0.039 mil (Installation distance: 20 mm 0.787 in)
2.5 μm 0.098 mil (Installation distance: 100 mm 3.937 in)
5 μm 0.197 mil (Installation distance: 500 mm 19.685 in)
(Note)This is the P-P value of digital measurement value with half shading at the middle position of the installation distance.
Linearity±0.12 % F.S. (Installation distance: 20 mm 0.787 in)
±0.28 % F.S. (Installation distance: 100 mm 3.937 in)
(Note)Indicates an error with the ideal straight line of digital measured values.
Min. sensing objectø0.5 mm ø0.020 in (Installation distance: 500 mm 19.685 in)
(Note)When the light is blocked at the center position of 500 mm 19.685 in installation distance.
Temprerature characteristics±0.03 % F.S./℃
(Note)When the light is half-blocked at the center position of 100 mm 3.937 in installation distance.
Operation indicatorEmitter : Laser radiation indicator (Green)
Receiver : Judgment output indicator (Orange / Green)
Pollution degree2
Operating altitude2,000 m 6,561.68 ft or less
(Note)Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental resistance : ProtectionIP67 (IEC) (Excluding connectors)
Environmental resistance : Ambient temperature-10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Ambient illuminanceIncandescent light: 5,000 ℓx or less at the light-receiving face
(Note)When the sampling cycle of the controller is set to "standard sampling".
Environmental resistance : Insulation resistance20 MΩ or higher, using 250 V DC megger (between all terminals and case)
Environmental resistance : Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance196 m/s2 acceleration in X, Y and Z directions three times each
Grounding methodCapacitor grounding
MaterialCase: Die-cast aluminum, Light emitting and light receiving surfaces: Glass
Cable0.2 m 0.656 ft 4-core shielded cable with round connectors
Net weightEmitter: 30 g approx., Receiver: 25 g approx.

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.