Product successfully added to your shopping cart
UHGS1010R
HG-S1010R
PANASONIC
1
HG-S contact measurement sensor, head, low force type, resolution 0,5μm, accuracy 2μm, range 10mm
HG-S - Contact measurement sensor. Low force sensor head. Resolution 0.5μm. Precision 2μm. Range 10mm
HG-S1010R_Contact-Type Digital Displacement Sensor_Contact-Type Digital Displacement Sensor HG-S_10 mm 0.394 in typeGeneral purpose Low measuring force type
Laser Sensors - Spot Type - AN - PANASONIC
Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
| Product Number | HG-S1010R |
| Part Number | HG-S1010R |
| Product | Contact-Type Digital Displacement Sensor |
| Details | 10 mm 0.394 in type General purpose Low measuring force type |
| Product name | Contact-Type Digital Displacement Sensor HG-S |
| Item | Specifications |
|---|---|
| Product Number | HG-S1010R |
| Part Number | HG-S1010R |
| Regulatory compliance | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Applicable controller | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113 |
| Position detection method | Optical absolute linear encoder method |
| Measuring range | 10 mm 0.394 in |
| Stroke | 10.5 mm 0.413 in or more |
| Measuring force : Downward mount | 0.35 N or less 0.30 N (Note 1): In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows. (Note 2): Typical value near center of measurement. |
| Measuring force : Upward mount | - |
| Measuring force : Side mount | 0.25 N or less 0.20 N (Note 1): In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows. (Note 2): Typical value near center of measurement. |
| Resolution | 0.5 μm 0.020 mil |
| Sampling rate | 1ms |
| Indication accuracy(P-P) | Full range: 2.0 μm 0.079 mil or less Narrow range: 1.0 μm 0.039 mil or less (any 60 μm 2.362 mil) |
| Tip deviation amount | 35 μm 1.378 mil (typical)(Note):Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values. |
| Hot swap function | Incorporated |
| Operation indicator | 2-color LED (Orange / Green) |
| Pollution degree | 2 |
| Operating altitude | 2,000 m 6561.68 ft or less (Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Environmental resistance : Protection | - |
| Environmental resistance : Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Insulation resistance | 100 MΩ or more at 250 V DC |
| Environmental resistance : Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 1,960 m/s2acceleration in X, Y and Z directions three times each |
| Grounding method | Capacitor grounding |
| Material | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe※: Brass (body) / Ceramic (ball), Rubber bellows: NBR (black) ※The probes (optional) are also available. |
| Weight | Net weight: 80 g approx. |
| Accessory | Low measuring force type (HG-S1010R / HG-S1110R): Sensor head fastening wrench 1 pc., Mounting nut 1 pc., Rubber bellows 1 pc. |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature +20 ℃ +68 ℉, and a clean atmosphere where dust and liquids such as water and oil do not come in contact with the equipment. |
| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PANASONIC SENSORS EN.pdf | 31 Mbytes |
|
| PDF CATALOGUE PANASONIC EN .pdf | 15 Mbytes |
|
| Download general catalog |
|
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.