EX-13SB-PN PANASONIC Thru beam, front sensing, 500mm, Dark-ON, PNP, cable 2m View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EX-13SB-PN PANASONIC Thru beam, front sensing, 500mm, Dark-ON, PNP, cable 2m

EX-13SB-PN

PANASONIC

Thru beam, front sensing, 500mm, Dark-ON, PNP, cable 2m

More details


Miniature Photoelectric Sensors - PANASONIC > EX10 Ultra-slim type photoelectric sensor - PANASONIC

* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

* This article is restricted. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Product Number EX-13SB-PN
Part Number EX-13SB-PN
Product Ultra-slim Photoelectric Sensor
Details Thru-beam・Narrow Beam [Front sensing]
Product name Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S

Item Specifications
Product Number EX-13SB-PN
Part Number EX-13SB-PN
Sensing range 500 mm 19.685 in
Min. sensing object dia. 1.0 mm dia. 0.039 in opaque object
Hysteresis -
Repeatability(perpendicular to sensing axis) 0.05 mm 0.002 in or less
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption Emitter: 10 mA or less
Receiver: 10 mA or less
Output PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
Output:Utilization category DC-12 or DC-13
Output:Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Incident beam indicator -
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Material Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
Weight Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Accessory Mounting screws: 1 set

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.