Product successfully added to your shopping cart
DPH-L133
PANASONIC
1
Sensor head DPH-L133 for positive pressure, 0 to 3.5MPa, R1/4 male thread, cable 2m, IP67
Pressure sensors - PANASONIC > DPC fluid and air pressure sensor - PANASONIC
* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Product Number | DPH-L133 |
Part Number | DPH-L133 |
Product | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
Details | Sensor head |
Product name | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
Item | Specifications |
---|---|
Product Number | DPH-L133 |
Part Number | DPH-L133 |
CE marking directive compliance | EMC Directive, RoHS Directive |
Type of pressure | Sealed gauge pressure (Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
Rated pressure range | 0 to +3.5 MPa |
Pressure withstandability | 7 MPa |
Applicable fluid | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
Supply voltage | 9 to 36 V DC [9 to 32 V DC when using the attached connector (e-CON)] |
Current consumption | 20 mA or less |
Analog voltage output | Output voltage: 1 to 5 V DC (over rated pressure range) Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉) ±2.0 % F.S. (at -20 to 70 ℃-4 to +158 ℉) (including linearity, hysteresis and repeatability) |
Response time | 1 ms or less |
Protection | IP67 (IEC) |
Ambient temperature | -20 to +70 ℃-4 to +158 ℉(No dew condensation or icing allowed), Storage: -30 to +70℃-22 to +158 ℉ |
Ambient humidity | 35 to 85 % RH, Storage : 35 to 85 % RH |
Medium temperature range | -20 to +70 ℃-4 to +158 ℉ |
Voltage withstandability | 150 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each (Note): The X, Y, and Z directions are defined as follows : |
Shock resistance | 1,000 m/s2acceleration in X, Y and Z directions three times each |
Grounding method | Capacitor earth (Enclosure-supply terminal) |
Pressure port | R1/4 male thread (throttle embeded) |
Material | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
Connecting method | Connector |
Cable | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
Cable extension | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
Weight | Net weight : 100 g approx., Gross weight : 150 g approx. |
Accessories | Connector (e-CON) : 1 pc. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉. The sensor head can be used independently. |
Title: | Type: | |
---|---|---|
Download general catalog |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.