F3SJ-B1265P25 356747 F3SB0015C OMRON Security Product, Class IV Basic Hand 1265mm Serial connection View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

F3SJ-B1265P25 356747 F3SB0015C OMRON Security Product, Class IV Basic Hand 1265mm Serial connection





Available Ship on today

Security Product, Class IV Basic Hand 1265mm Serial connection

More details

Security Light Curtains

F3SJ-A and MS Safety Barriers

* Brand new product in its original packaging covered by the warranties and certifications provided by OMRON

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

F3SJ-B Safety sensors
Basic type with a combination of performance and functionality
The F3SJ-B-family is a type 4 safety light curtain with an optical resolutionof 25 mm. An operation range of up to 7 m and a protective height up to 2,065 mm are provided with no dead zone
• Detection height = sensor height
• Simple hand protection
• Muting function available
• Series connection up to three sets
• Type 4 sensor complying with EN 61496-1and up to PLe accordingEN ISO 13849
Ordering information
Application Detection capability Beam gap Operating range Protective height (mm) Order code
Hand protectionDia. 25 mm 20 mm0.2 to 7 m185 to 2,065 F3SJ-B P25
Number of beamsProtective height (mm)*1
Order code
8185 F3SJ-B0185P25
10225 F3SJ-B0225P25
14305 F3SJ-B0305P25
18385 F3SJ-B0385P25
22465 F3SJ-B0465P25
26545 F3SJ-B0545P25
30625 F3SJ-B0625P25
34705 F3SJ-B0705P25
38785 F3SJ-B0785P25
42865 F3SJ-B0865P25
46945 F3SJ-B0945P25
*1Protective height (mm) = Total sensor length
F3SJ-B Safety sensors
Accessories (sold separately)
Sensor mounting bracket
Appearance Specifications Application Remarks Order code
Top/bottom bracketTop/bottom bracket for F3SJ-E/B2 for an emitter,
2 for a receiver, total of 4 per set
Intermediate bracket In combination use with top/bottom bracket for F3SJ-E/B
Can be used as free-location bracket.
1 set with 2 pieces F39-LJB2*1 *2
Quick mount bracket Quick mount bracket for F3SJ-E/B
SupportsM6 slide nut for aluminum frame.
Quick mount bracket for F3SJ-E/B
SupportsM8 slide nut for aluminum frame.
1 set with 2 pieces F39-LJB3-M6*1
Quick mount M6 brack- Bracket to mount an intermediate bracket to the aluminum frame
Hexagon socket head
Quick mount M8 brack- et
with a single touch.
cap screws
(M6 × 10) are included.
Hexagon socket head cap screws
(M8 × 14) are included.
Compatible mounting bracket
Mounting bracket used when replacing existing area sensors
(F3SJ-A or F3SN) with the F3SJ-E/B.
2 for an emitter,
2 for a receiver, total of 4 per set
Contact mount bracketBracket to closely contact the back side of the sensor. 2 for an emitter,
2 for a receiver, total of 4 per set
*1Combining F39-LJB2 and F39-LJB3-M6K makes F39-LJB3-M6.
*2Combining F39-LJB2 and F39-LJB3-M8K makes F39-LJB3-M8.
Laser pointer
Appearance OutputOrder code
Laser pointer for F3SJF39-PTJ
F3SJ-B Safety sensors
Sensor typeType 4 safety light curtain
Setting tool connection*1
Parameter settings: Not available
Safety categorySafety purpose of category 4, 3, 2, 1, or B Detection capabilityOpaque objects 25 mm in diameter Beam gap (P) 20 mm
Number of beams (n)8 to 102
Protective height (PH)185 to 2,065 mm
Lens diameterDiameter 5 mm
Operating range*2
Response time (under stable light incident condition)
0.2 to 7 m
ON to OFF 15 ms max. (response time at 1 set connection, series connection of 2 sets or 3 sets)
OFF to ON70 ms max. (response time at 1 set connection, series connection of 2 sets or 3 sets)
Startup waiting time 2 s max.
Power supply voltage (Vs) SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
Consumption current (no load) Emitter: Up to 22 beams: 52 mA max., 26 to 42 beams: 68 mA max., 46 to 62 beams: 75 mA max.,
66 to 82 beams: 88 mA max., 86 to 102 beams: 101 mA max.
Receiver: Up to 22 beams: 45 mA max., 26 to 42 beams: 50 mA max., 46 to 62 beams: 56 mA max.,
66 to 82 beams: 61 mA max., 86 to 102 beams: 67 mA max.
Light source (emitted wavelength) Infrared LED (870nm)
Effective aperture angle (EAA) Based on IEC 61496-2. Within ±2.5° for both emitter and receiver when the detection distance is 3 m or over
Safety outputs (OSSD) Two PNP transistor outputs, load current 200 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), Leakage current
1 mA max., load inductance 2.2 H max.*3, Maximum capacityload 1 F*4
Auxiliary output 1 One PNP transistor outputs, load current 100 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), leak current 1 mA
Output operation modeSafety output: On when receiving light
Auxiliary output:
– Reverse output of safety output for a basic system
– ON when muting/override for a muting system
Input voltage ON voltage: Vs-3 V to Vs, OFF voltage: 0 V to 1/2 Vs or open*5
Mutual interference prevention function
Mutual interference prevention algorithm prevents interference in up to 3 sets.
Series connectionTime division emission by series connection
Number of connections: up to 3 sets (between F3SJ-Bs only)Other models cannot be connected. Total number of beams: up to 192 beams
Maximum cable length for 2 sets: no longer than 7 m
Test function Self test (at power-ON and at power distribution) External test (emission stop function by test input)
Safety-related functionsInterlock (basic system)
External device monitoring (basic system) Muting (muting system)
Override (muting system)
Connection typeConnector method (M12, 8-pin)
Protection circuitOutput short-circuit protection, and power supply reverse polarity protection
Ambient temperatureOperating: –10 to 55°C (non-freezing), Storage: –25 to 70°C Ambient humidity Operating: 35% to 85% (no condensation), Storage: 35% to 95% RH Operating ambient light intensity Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. Insulation resistance 20 M min. (at 500 VDC)
Dielectric strength 1,000 VAC 50/60Hz, 1 min
Degree of protectionIP65(IEC 60529)
Vibration resistance Malfunction: 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps in X, Y, and Z directions
Shock resistanceMalfunction: 100 m/s2, 1,000 times each in X, Y, and Z directions
Pollution degreePollution degree 3 (IEC 60664-1)
Power cable Connection method: Prewired connector cable, cable length 0.3 m, connector type (M12, 8-pin), connector: IP67 rated (when mated) Number of wires: 8 wires
Cable diameter: Dia. 6 mm
Allowable bending radius: R5 mm
Extension cable 30 m max.
Material Case: Aluminum
Cap: ABS resin,PBT
Opticalcover:PMMA resin(acrylic) Cable: Oil resistant PVC
Weight (packed state)Weight (g) = (protective height) × 2.7 + 500
AccessoriesTest rod, Instruction manual, User's manual (CD-ROM)*6
Applicable standards IEC 61496-1, EN 61496-1 UL 61496-1, Type 4 ESPE (Electro-sensitive protective equipment)
IEC 61496-2, CLC/TS 61496-2, UL 61496-2, Type 4 AOPD (Active opto-electronic protective devices) IEC 61508-1 to -3, EN 61508-1 to -3 SIL3
IEC 13849-1: 2006, EN ISO 13849-1: 2008 (PLe, Cat.4)
UL 508,UL 1998,CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
*1Do not use the support software and setting console for F3SJ-A. Operation cannot be guaranteed.
*2Use of the spatter protection cover causes a 10% maximum sensing distance attenuation.
*3The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger.
*4These values must be taken into consideration when connecting elements including a capacitive load such as capacitor.
*5The Vs indicates a voltage value in your environment.
*6Mounting brackets are sold separately.
F3SJ-B Safety sensors
Basic Wiring Diagram
Wiring when using manual reset mode, external device monitoring (F3SJ-B P25) (PNP output)
F39-JD_A-L F39-JD_A-D
(Gray) Communication line (+) (Pink)
Communication line (−)
S1 S2
24 VDC Power
0 V
S1 : External test switch (connect to 0 V if a switch is not required) S2 : Interlock/lockout reset switch
KM1, KM2 : Safetyrelay with force-guided contact (G7SA) or magnetic contactor
K1: Load or PLC, etc. (for monitoring)

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.