VBS Connection and fastening systems - OBO BETTERMANN

1483703

BCHPC 8-14 D25

-

FIXING TO BEAM BCHPC 8-14 D25

1483701

BCHPC 8-14 D20

-

FIXING TO BEAM BCHPC 8-14 D20

1483707

BCHPC 8-14 D40

-

FIXING TO BEAM BCHPC 8-14 D40

1483705

BCHPC 8-14 D32

-

FIXING TO BEAM BCHPC 8-14 D32

Fixing to beam BCHPC 8-14 D32, with clip for 30-32mm 8-14mm Steel, St, Zinc sheet

Clamp, for tubes, closed/side

2008852

SDB 12 PC

-

DISTRIBUTION BOX 12 DISP PC

Distribution box, 12 division units, with terminal strip, polycarbonate. Distribution box with terminal strip for surface mounting, for the current sub-distribution in interior and exterior areas, in accordance with IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out.- Protection-insulated for a maximum of 12 division units- Terminal strip set consisting of: One each of: PE/N terminal (1x25 mm² and 1x16 mm² screw terminals, 2x4 mm² and 12x2.5 mm² screwless terminals), mini hat profile rail, mounting instructions and fastening set- Identification plates for connected consumers- 8 elastic cable entries Ø20 mm for cable diameters of 0–17 mm- 1 elastic cable entry Ø25 mm for cable diameters of 0–22 m

2331922

565 7.6x380 WS

-

FLANGE 565 7.6x380 BL PA

Cable tie, white. Cable ties are used for quick, uncomplicated fixing or bundling of cables and pipes to cable support systems or other mounting structures.

1148388

MS41HBF M10x60FT

-

TORNIL CBZ/GAN PIER MS4121/4141

1148380

MS41HBF M8x60 FT

-

SCREW C/DOCK IS MS4121/4141

1148384

MS41HBF M10x30FT

-

SCREW C/DOCK IS MS4121/4141

1483941

BCC 4-7 D14

-

FIXING TO BEAM BCC 4-7 D14

Fixing to beam BCC 4-7 D14, for cable, 12-14mm 4-7mm Steel, St, Zinc sheet

2024919

V-TEC TB25 12-15

-

PRENS. DIVISIBLE V-TEC TB25 11-15

Divisible cable gland, seal insert, 1 cable, light grey. The splittable cable gland V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The installation of pre-terminated cables or function cables, for example, is easy and quick, thanks to the splitting of the cable gland.The V-TEC TB is also unbeatable when refitting an existing installation and as a "repair gland". There is no need to disassemble pre-mounted cables, it can be installed without interrupting the production process.The gland set consists of an intermediate support, a cap nut and the seal. Of course, the split locknut is also in the scope of delivery.

1483945

BCC 4-7 D18

-

FIXING TO BEAM BCC 4-7 D18

2024913

V-TEC TB25 09-11

-

PRENS. DIVISIBLE V-TEC TB25 07-10

Divisible cable gland, seal insert, 1 cable, light grey. The splittable cable gland V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The installation of pre-terminated cables or function cables, for example, is easy and quick, thanks to the splitting of the cable gland.The V-TEC TB is also unbeatable when refitting an existing installation and as a "repair gland". There is no need to disassemble pre-mounted cables, it can be installed without interrupting the production process.The gland set consists of an intermediate support, a cap nut and the seal. Of course, the split locknut is also in the scope of delivery.

2024910

V-TEC TB25

-

PRENS. DIVISIBLE V-TEC TB25

Divisible cable gland, seal insert enclosed, light grey. The splittable cable gland V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The installation of pre-terminated cables or function cables, for example, is easy and quick, thanks to the splitting of the cable gland.The V-TEC TB is also unbeatable when refitting an existing installation and as a "repair gland". There is no need to disassemble pre-mounted cables, it can be installed without interrupting the production process.The gland set consists of an intermediate support, a cap nut and the seal. Of course, the split locknut is also in the scope of delivery.

2024916

V-TEC TB25 11-13

-

PRENS. DIVISIBLE V-TEC TB25 09-13

Divisible cable gland, seal insert, 1 cable, light grey. The splittable cable gland V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The installation of pre-terminated cables or function cables, for example, is easy and quick, thanks to the splitting of the cable gland.The V-TEC TB is also unbeatable when refitting an existing installation and as a "repair gland". There is no need to disassemble pre-mounted cables, it can be installed without interrupting the production process.The gland set consists of an intermediate support, a cap nut and the seal. Of course, the split locknut is also in the scope of delivery.

1147114

MS40SN M10 ZL

-

NUT DES P/PROFILE MS4022

Slide nut ZL. Slide nut for use with MS4022 profile rail.

1147110

MS40SN M8 ZL

-

NUT DES P/PROFILE MS4022

Slide nut ZL. Slide nut for use with MS4022 profile rail.

1147118

MS40SN M12 ZL

-

NUT DES P/PROFILE MS4022

Slide nut ZL. Slide nut for use with MS4022 profile rail.

1483765

BCVPO 8-12,5 D32

-

FIXING TO BEAM BCVPO 8-12,5 D32

1483761

BCVPO 8-12,5 D20

-

FIXING TO BEAM BCVPO 8-12,5 D20

1483763

BCVPO 8-12,5 D25

-

FIXING TO BEAM BCVPO 8-12,5 D25

1147348

MS41SNF M12 A4

-

NUT DES C/DOCK MS4121/4141

Spring Sliding Nut MS41SNF M12 A4 for MS4121/4141 M12 Stainless Steel Profiles, A4 Polished, Post-Treated

2008872

SDB 12L PC

-

BOX, DISTR.WITHOUT REGLT.12 DISP PC

Small SDB 12L PC distribution board, without power strip, 12 devices 286x202x125 Polycarbonate, PC,

Distribution box, 12 division units, empty, polycarbonate. Small distributor for surface mounting, for the current sub-distribution in interior and exterior areas, according to IEC 439-3. With pre-mounted 35 mm hat profile rail. IP66 protection type and IK08 protection rating. Transparent cover to screw on, with cut-out. Including 4 screw cover caps.- Protection-insulated for a maximum of 12 division units- 11 break-out openings each of Ø 20 mm at the top and bottom- 1 combination break-out opening each of Ø 20/25/32 mm at the top and bottom- 4 screw cover capsNominal current 63 APower loss at 40 K 25.1 W

1483643

BCCT 4-8 L240

-

FIXING TO BEAM BCCT 4-8 L240

Fixing to BCCT 4-8 L240 beam, with 240mm flange 4-8mm Steel, St, Zinc sheet

2331946

565 9x760 SWUV

-

FLANGE 565 9x760 NG UV PA

Cable tie 565 9x760 SWUV, UV resistant 9x760mm Polyamide, PA,

Cable tie, black, UV resistant. Cable ties are used to fix or join cables and tubes in cable tray systems or other mounting structures quickly and easily.

2331944

565 9x760 WS

-

FLANGE 565 9x760 BL PA

Cable tie, white. Cable ties are used for quick, uncomplicated fixing or bundling of cables and pipes to cable support systems or other mounting structures.

1122904

MS4121 EK

-

PROTECTIVE CAP MS4121 EK

End cap MS4121. End cap for profile rail, type MS 21.

1115804

2069 L 2M FS

-

PROFILE DIN 2069 2M FS

Hat profile rail, perforated FS. Hat profile rail 35 x 7.5 mm to DIN EN 60715 (formerly DIN EN 50022).

1148056

ACMHB M6x30 ZL

-

NUT DES C/SCREW PERF MED

ACMHB M6x30 ZL sliding screw, for profiles, M6x30mm Steel, St, Zinc sheet

ZL hook screw. Hook screw for use with CM3015, CM3518 and AM3518 profiles

1483969

BCC 8-12 D14

-

FIXING TO BEAM BCC 8-12 D14

Fixing to beam BCC 8-12 D14, for cable, 12-14mm 8-12mm Steel, St, Zinc sheet

Clamping clamp, for tubes, open/side. Beam attachment for impact fitting for cable as an individual attachment solution to the bracket.