VBS Pizza Plastic fixing - OBO BETTERMANN

2124149

3079 LGR

-

SOM clip , 5-14mm, Light grey, 7035, Polystyrene, PS

SOM clip, single. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.

2124173

3080 LGR

-

SOM clip , 6-17mm, Light grey, 7035, Polystyrene, PS

SOM clip, single. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.

2124254

3081 LGR

-

SOM clip , 15-25mm, Light grey, 7035, Polystyrene, PS

SOM clip, single. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.

2124343

3082 LGR

-

SOM clip , 24-34mm, Light grey, 7035, Polystyrene, PS

SOM clip, single. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.

2124459

3083 LGR

-

SOM clip , 32-45mm, Light grey, 7035, Duroplast, Aminoplast, type 131.5, UF, Typ 131.5

SOM clip, single, hardly flammable. With plastic screws, so corrosion-protected, with slot for fastening with wood screws or 5 mm knock-in anchors.Hardly flammable.

2124491

3080 2 LGR

-

SOM clip 2 cables, 6-17mm, Light grey, 7035, Polystyrene, PS

2148021

1975 12-15

-

Snap clip , 12-15mm, Light grey, 7035, Polyamide, PA

Snap clip. With moulded-on push-fit plug for rapid mounting in concrete walls and masonry.Push plug into hole until the clip makes contact with the surface. When the pipe is pressed into the clip, the arms of the clip grip it.

2148048

1975 16-19

-

Snap clip , 16-19mm, Light grey, 7035, Polyamide, PA

Snap clip. With moulded-on push-fit plug for rapid mounting in concrete walls and masonry.Push plug into hole until the clip makes contact with the surface. When the pipe is pressed into the clip, the arms of the clip grip it.

2148056

1975 19-22

-

Snap clip , 19-22,5mm, Light grey, 7035, Polyamide, PA

Snap clip. With moulded-on push-fit plug for rapid mounting in concrete walls and masonry.Push plug into hole until the clip makes contact with the surface. When the pipe is pressed into the clip, the arms of the clip grip it.

2148501

1976 12-15

-

Klick-Snap clip , 12-15,5mm, Light grey, 7035, Polyamide, PA

Taco-staple click 1976 12-15, 12-15.5mm Polyamide, PA,

Click Snap Clamp

2148528

1976 16-21

-

Klick-Snap clip , 16-21,5mm, Light grey, 7035, Polyamide, PA

Click-snap clip. With moulded-on push-fit plug for rapid mounting in concrete walls and masonry.Push plug into hole until the clip makes contact with the surface. When the pipe is pressed into the clip, the arms of the clip grip it.

2148536

1976 22-28

-

Klick-Snap clip , 22,5-28,5mm, Light grey, 7035, Polyamide, PA

Taco-staple click 1976 22-28, 22.5-28.5mm Polyamide, PA,

Automatic clamp. With expandable plug for quick assembly on concrete walls and masonry. Insert the plug into the drilled hole until the bottom edge of the clamp rests against the hole, pressing the tube closes and automatically locks around the tube.

2148803

1973 3-13 LGR

-

BKS clamp , 3-13mm, Light grey, 7035, Polyamide, PA

BKS 1973 3-13 LGR 3-13mm Light Grey Clamp-Plug, RAL 7035 Polyamide, PA

2148846

1973 8-28 LGR

-

BKS clamp , 8-28mm, Light grey, 7035, Polyamide, PA

BKS clamp clip. For cables, flexible pipes and all kinds of insulating and armoured steel pipes, suitable for concrete, calcareous limestone and full brick. Use in gas concrete masonry is possible, but reduced load capacities must be expected.

2148862

1973 20-40 LGR

-

BKS clamp , 20-40mm, Light grey, 7035, Polyamide, PA

BKS clamp clip. For cables, flexible pipes and all kinds of insulating and armoured steel pipes, suitable for concrete, calcareous limestone and full brick. Use in gas concrete masonry is possible, but reduced load capacities must be expected.

2197804

1974 16-23

-

Plug-in clip single, 16-23mm, Light grey, 7035, Polyamide, PA

Single push-fit clip. These push-fit clips are used when installing cables and pipes on walls and ceilings and when running flexible pipes on concrete and in the screed. The single push-fit clips can be used instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they only have to be pushed into the drilled hole. Anchors and bolts are not needed.

2197812

1974 22-30

-

Plug-in clip single, 22-30mm, Light grey, 7035, Polyamide, PA

Single push-fit clip. These push-fit clips are used when installing cables and pipes on walls and ceilings and when running flexible pipes on concrete and in the screed. The single push-fit clips can be used instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they only have to be pushed into the drilled hole. Anchors and bolts are not needed.

2197855

1974 2X4-12

-

Plug-in clip double, 4-12mm, Light grey, 7035, Polyamide, PA

2197863

1974 2X12-25

-

Plug-in clip double, 12-25mm, Light grey, 7035, Polyamide, PA

2205400

2031 F 10

-

Grip collecting clamp flame-resistant to 960°C, 10x NYM3x1,5, Stone grey, 7030, Polypropylene, PP

2205404

2031 20

-

Grip collecting clamp , 20x NYM3x1,5, Light grey, 7035, Polypropylene, PP

Grip 20. Cable tidy for general use with fastening holes of Ø 6 mm, suitable for wall and ceiling mounting. The moulded fastening element can be fastened using knock-in anchors or a gas pressure nail gun. The recommended fastening spacing when assigned fully is 250–400 mm. With multifunctional fastening element.Capacity: 2031/ 20 max. 20 cables NYM 3 x 1.5 mm²

2205408

2031 20 SP

-

Grip collecting clamp , 20x NYM3x1,5, Light grey, 7035, Polypropylene, PP

2205412

2031 F 20

-

Grip collecting clamp flame-resistant to 960°C, 20x NYM3x1,5, Stone grey, 7030, Polypropylene, PP

Grip 20 flame-resistant. Cable tidy with moulded fastening element, for mounting up to 20 cables NYM 3 x 1.5 mm2 on walls or ceilings. Fastening with impact anchor or push-fit anchor. Fastening hole: Ø 6 mm. Recommended fastening distance of 250–400 cm when fully assigned, depending on the respective national specifications/norms. Flame resistant to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960 °C.With multifunctional fastening element.Capacity: 2031/ 20 max. 20 cables NYM 3 x 1.5 mm²

2205416

2031 40

-

Grip collecting clamp , 40x NYM3x1,5, Light grey, 7035, Polypropylene, PP

Grip 40. Cable tidy for general use with fastening holes of Ø 6 mm, suitable for wall and ceiling mounting. The moulded fastening element can be fastened using knock-in anchors or a gas pressure nail gun. The recommended fastening spacing when assigned fully is 250–400 mm.With multifunctional fastening element. Capacity: 2031/ 40 max. 40 cables NYM 3 x 1.5 mm²

2205420

2031 40 SP

-

Grip collecting clamp , 40x NYM3x1,5, Light grey, 7035, Polypropylene, PP

Grip 40. Cable tidy for general use with fastening holes of Ø 6 mm, suitable for wall and ceiling mounting. The moulded fastening element can be fastened using knock-in anchors or a gas pressure nail gun. The recommended fastening spacing when assigned fully is 250–400 mm.With multifunctional fastening element. Capacity: 2031/ 40 max. 40 cables NYM 3 x 1.5 mm²

2205423

2031 F 40

-

Grip collecting clamp flame-resistant to 960°C, 40x NYM3x1,5, Stone grey, 7030, Polypropylene, PP

Grip 40 flame-resistant. Cable tidy with moulded fastening element, for mounting up to 40 cables NYM 3 x 1.5 mm2 on wall or ceilings. Fastening with impact anchor or push-fit anchor. Fastening hole: Ø 6 mm. Recommended fastening distance of 250–400 cm when fully assigned, depending on the respective national specifications/norms. Flame resistant to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960 °C.With multifunctional fastening element. Capacity: 2031/ 40 max. 40 cables NYM 3 x 1.5 mm²

2330059

550 6X180 SW

-

Strip clip single lock, 6x180mm, Black, Polyamide, PA

2330075

550 6X290 SW

-

Strip clip single lock, 6x290mm, Black, Polyamide, PA

2330091

550 6X360 SW

-

Strip clip single lock, 6x360mm, Black, Polyamide, PA

2330229

550 9X180 SW

-

Strip clip single lock, 9x180mm, Black, Polyamide, PA