VBS junction boxes - OBO BETTERMANN

2000001

A 6

-

Junction box , 80x43x34, Light grey, 7035, Polyethylene, PE

Junction box A 6, Junction box 80x43x34 Polyethylene, PE,

Junction box A 6. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 6 entries for cable diameter 5‒14 mm4 entries for cable diameter 5–9 mm.Clamshell.Dimensions: 80 x 43 x 36 mmClear internal dimensions: 69 x 32 x 30 mm1 cut-out tool for every 10 boxes

2000005

A 6 HF RW

-

Junction box , 80x43x34, Pure white, 9010, Polyethylene, PE

Junction box A 6 HF RW, 80x43x34 Polyethylene, PE,

2000016

A 8

-

Junction box , 75x75x36, Light grey, 7035, Polyethylene, PE

Junction box A 8, 75x75x36 Polyethylene, PE,

Junction box A 8. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 7 entries for cable diameter 5‒14 mm.Clamshell.Dimensions: 75 x 75 x 36.2 mmClear internal dimensions: 65 x 65 x 32 mm1 cut-out tool for every 10 boxesA8 VDE empty: without terminal block

2000075

A 8 HF RW

-

Junction box , 75x75x36, Pure white, 9010, Polyethylene, PE

Junction box A 8. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 7 entries for cable diameter 5‒14 mm.Clamshell.Dimensions: 75 x 75 x 36.2 mmClear internal dimensions: 65 x 65 x 32 mm1 cut-out tool for every 10 boxes

2000180

A 11 HF RW

-

Junction box , 85x85x40, Pure white, 9010, Polyethylene, PE

Junction box A 11. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 12 entries for cable diameters of 5‒14 mm.Clamshell.Dimensions: 85 x 85 x 40 mmClear internal dimensions: 75 x 75 x 35 mm1 cut-out tool for every 10 boxes

2000342

A 11

-

Junction box without terminal strip, 85x85x40, Light grey, 7035, Polyethylene, PE

Junction box A 11, without connection strip 85x85x40 Polyethylene, PE,

Junction box A 11. IP55 protection degree, nominal voltage of 690 V, nominal section of 2.5 mm², 12 inputs for cable diameter of 5-14 mm. Terminal cover. Dimensions: 85 x 85 x 40 mmInterior measurements: 75 x 75 x 35 mmFor every 10 boxes, 1 cutting tool

2000378

A 14

-

Junction box , 100x100x38, Light grey, 7035, Polyethylene, PE

Junction box A 14. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 8 entries for cable diameter 5‒14 mm8 entries for cable diameter 5–11 mm.Clamshell.Dimensions: 100 x 100 x 40 mmClear internal dimensions: 90 x 90 x 35 mm1 cut-out tool for every 10 boxes

2000390

A 14 HF RW

-

Junction box , 100x100x38, Pure white, 9010, Polyethylene, PE

Junction box A 14. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 8 entries for cable diameter 5‒14 mm8 entries for cable diameter 5–11 mm.Clamshell.Dimensions: 100 x 100 x 40 mmClear internal dimensions: 90 x 90 x 35 mm1 cut-out tool for every 10 boxes

2000410

A 18

-

Junction box , 125x100x38, Light grey, 7035, Polyethylene, PE

Junction box A 18. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 10 entries for cable diameter 5‒14 mm8 entries for cable diameter 5‒11 mm.Clamshell.Dimensions: 125 x 100 x 40 mmClear internal dimensions: 115 x 90 x 35 mm1 cut-out tool for every 10 boxes

2000422

A 18 HF RW

-

Junction box , 125x100x38, Pure white, 9010, Polyethylene, PE

Junction box A 18. Protection rating IP55, rated voltage 690 V, nominal cross-section 2.5 mm², 10 entries for cable diameter 5‒14 mm8 entries for cable diameter 5‒11 mm.Clamshell.Dimensions: 125 x 100 x 40 mmClear internal dimensions: 115 x 90 x 35 mm1 cut-out tool for every 10 boxes

2003015

UG 60 D

-

Box, empty concealed, Ø60mm, H40mm, Black, Polystyrene, PS

Box for UG 60 D mechanisms, recessed Ø60mm, H40mm Polystyrene, PS,

Recessed mechanism box

2003019

UG 60 VD

-

Device/connection plug concealed, Ø60mm, H60mm, Black, Polystyrene, PS

UG 60 VD connection box/mechanisms, recessed Ø60mm, H60mm Polystyrene, PS,

Recessed mechanism or connection box. Torsion-protected gearbox/connection box, standard and guaranteed combination distance of 71 mm (according to DIN 49 073-1) by means of quick-snap coupling. Breakable openings for conductors and tubes of Ø 20 mm and Ø 25 mm. Combinable for expansion and screw fixing, deep supports for recessed, distance between screws for mechanisms of 60 mm, to fix with self-tapping screws of 3.2 mm, with 2 spaces for screws but without screws, IP20 protection degree.

2003023

UG 60 VK

-

Device/connection plug concealed, 70x110x48, Black, Polystyrene, PS

2003031

UG 60 D NL

-

2003035

UG 60 VD NL

-

Device/connection plug concealed, with nail strap, Ø60mm, H60mm, Black, Polystyrene, PS

2003047

UV 70 D NL

-

2003082

UWA

-

Wall light connection socket concealed, 60x30x32, Cream, 9001, Polystyrene, PS

2003112

UV 80 K

-

Hollow wall, connection box concealed, 80x80x45, Black, Polystyrene, PS

Flush-mounted connection box 80. Flush-mounted connection box for clamping terminals, for use in masonry with an installation depth of at least 45 mm. With cover and cover screws (15 mm). Flat cover edge, roughened surface. • 6 side entries of Ø 19 mm• 4 side entries of Ø 21.5 mm• 4 side entries for flat cables/ribbon cables• 2 entries of Ø 21.5 mm in the base• 2 entries for flat cables/ribbon cables at the base

2003118

UV 100 K

-

Hollow wall, connection box concealed, 100x100x45, Black, Polystyrene, PS

UV 100 K connection box, recessed 100x100x45 Polystyrene, PS,

Recessed box of 100. Recessed box for connections, use in masonry with an installation depth of at least 45 mm. With lid and screws for lid (15 mm) The edge of the lid rests in a flat position, the surface is grated. • 4 side combined conduit entries Ø 28.5 and 21.5 mm• 8 side entries Ø 21.5 mm• 8 side entries for flat/ribbed cables• 4 combined pipe entries Ø 28.5 and 21.5 mm on the ground• 8 flat cable/ribbed entries on the floor

2003124

UV 150 K

-

Hollow wall, connection box concealed, 150x150x65, Black, Polystyrene, PS

Flush-mounted connection box 150. Flush-mounted connection box for clamping terminals, for use in masonry with an installation depth of at least 65 mm. With cover and cover screws (15 mm). Flat cover edge, roughened surface. • 4 side combination pipe entries of Ø 34.6/28.5 mm• 8 side combination pipe entries of Ø 28.5/21.5 mm• 8 side entries for flat cables/ribbon cables• 2 entries of Ø 34.6 and 28.5 mm in the base• 2 entries for flat cables/ribbon cables at the base

2003130

UV 200 K

-

Hollow wall, connection box concealed, 200x200x65, Black, Polystyrene, PS

UV 200 K connection box, recessed 200x200x65 Polystyrene, PS,

Recessed box of 200. Recessed box for connections, use in masonry with an installation depth of at least 65 mm With cover and screws for cover (15 mm) The edge of the cover rests in a flat position, the surface is scratched. • 4 x Ø 34.6 and 28.5 mm side combination conduit entries• 8 x Ø 28.5 and 21.5 mm lateral combination conduit entries• 8 x Flat/Ribbed Cable Side Entries• 2 x Ø 34.6 and 28.5 mm Combined Pipe Entries on the floor• 2 x Flat Cable/Flat Cable Entries on the floor

2003136

UV 250 K

-

Hollow wall, connection box concealed, 250x250x65, Black, Polystyrene, PS

Flush-mounted connection box 250. Flush-mounted connection box for clamping terminals, for use in masonry with an installation depth of at least 65 mm. With cover and cover screws (15 mm). Flat cover edge, roughened surface. • 8 side combination pipe entries of Ø 34.6/28.5 mm • 8 side combination pipe entries of Ø 28.5/21.5 mm• 8 side entries for flat cables/ribbon cables

2003414

HG 60

-

Box, empty cavity wall, Ø68mm, H45mm, Orange, Polypropylene, PP

HG 60 mechanism box, hollow wall Ø68mm, H45mm Polypropylene, PP,

2003422

HG 60 2

-

Double appliance plug cavity wall, 138x68x50, Orange, Polypropylene, PP

Double box of HG 60 2 devices, hollow wall 138x68x50 Polypropylene, PP,

Mechanism box for technical walls (plasterboard), double. Double mechanism box, for 2 mechanisms or 1 double mechanism, with 4 screws for mechanisms. Dimensions according to DIN 49073-1, for a plate thickness between 7 and 35 mm. Standard combination distance of 71 mm, 14 breakable openings for NYM conductors, data lines and tubes of 20 mm Ø, IP30 degree of protection. IEC 60670-1, IEC 60670-22 and DIN 49073-1 standards.

2003426

HG 60-35

-

Box, empty cavity wall, Ø68mm, H35mm, Orange, Polypropylene, PP

Box for HG 60-35 mechanisms, hollow wall Ø68mm, H35mm Polypropylene, PP,

Mechanism box for hollow walls

2003430

HV 70 D

-

Connection plug cavity wall, Ø74mm, H50mm, Orange, Polypropylene, PP

2003442

HV 60

-

Device/connection plug cavity wall, Ø68mm, H61mm, Orange, Polypropylene, PP

HV 60 connection box/mechanisms, hollow wall Ø68mm, H61mm Polypropylene, PP,

Mechanism or connection box for hollow walls.. Mechanism/connection box for hollow walls. Dimensions according to DIN 49073-1, for a plate thickness between 7 and 35 mm. Standard combination distance of 71 mm, possibility of wiring between boxes with the help of connecting connectors With combinations between mechanism boxes and mechanism junction boxes, the mechanism boxes can also be used as junction boxes according to VDE 0606-1 with double screw fixing and screwed cover, IP30 degree of protection. IEC 60670-1, IEC 60670-22 and DIN 49073-1 standards.

2003449

HV 100 KD

-

Hollow wall, connection box cavity wall, 105x105x50, Orange, Polypropylene, PP

Cavity wall connection box. Cavity wall connection box for use in cavity walls with an installation depth of at least 50 mm and a plate thickness of 7-35 mm. With white cover and cover screws. Suitable for installation of standard rails (hat and support rails) for series terminals.• 8 entries of Ø 20 mm• 8 entries for NYM cables 3 x 1.5 mm²• 4 entries for data cables (extra-low voltage)According to IEC 60670-1, IEC 60670-22 and DIN 49073-1.

2003603

HG 60-35 MW

-

Box, empty cavity wall 2K, Ø68mm, H35mm, Orange, Polypropylene, PP

2003611

HG 60 MW

-

Box, empty cavity wall 2K, Ø68mm, H47mm, Orange, Polypropylene, PP

HG 60 MW mechanism box, hollow wall 2K Ø68mm, H47mm Polypropylene, PP,

Mechanism box for technical walls (plasterboard), airtight. Mechanism box for hollow walls, draught-tight version thanks to the soft membrane of the inlets. Dimensions according to DIN 49073-1, for a plate thickness between 7 and 35 mm. Standard combination distance of 71 mm, wiring possible via connection connectors with combinations between mechanism boxes and mechanism connection boxes. The mechanism boxes can also be used as junction boxes according to VDE 0606-1 with double screw fastening and screw-on cover with IP40 degree of protection. Includes 12 union connectors. IEC 60670-1, IEC 60670-22 and DIN 49073-1 standards.