LFS cable routing systems - OBO BETTERMANN

6279610

GA-DA90210RW

-

External corner, trunking height 90 mm

GA-DA90210RW exterior angle 2 compartments 90x210x300 pure white Aluminum, Alu

6279613

GA-DA90210EL

-

External corner, trunking height 90 mm

External corner, symmetrical, for device installation trunking Rapid 80 type GA-D90210. External corner for changing the direction of the Rapid 80 GA aluminium device installation trunking.

6279423

GA-AFS70170EL

-

Flat angle, rising, trunking height 70 mm

Flat angle GA-AFS70170EL asymmetrical 70x170x300 aluminum Aluminum, Alu anodized

6279413

GA-AA70170EL

-

External corner, trunking height 70 mm

External corner, asymmetrical, for device installation trunking Rapid 80 type GA-A70170. External corner for changing the direction of the Rapid 80 GA aluminium device installation trunking.

6279420

GA-AFS70170RW

-

Flat angle, rising, trunking height 70 mm

Flat angle, asymmetrical, rising, for device installation trunking Rapid 80 type GA-A70170. Rising flat angle to change the direction of the Rapid 80 GA aluminium device installation trunking.

6279410

GA-AA70170RW

-

External corner, trunking height 70 mm

External corner, asymmetrical, for device installation trunking Rapid 80 type GA-A70170. External corner for changing the direction of the Rapid 80 GA aluminium device installation trunking.

6279430

GA-AFF70170RW

-

Flat angle, falling, trunking height 70 mm

GA-AFF70170RW flat downward asymmetrical angle 70x170x300 pure white Aluminum, Alu

6279433

GA-AFF70170EL

-

Flat angle, falling, trunking height 70 mm

Flat angle, asymmetrical, falling, for device installation trunking Rapid 80 type GA-A70170. Flat angle, falling, for changing the direction of the Rapid 80 GA aluminium device installation trunking.

6113430

GK-IS53165RW

-

< INT R45-2 53X165 NOT VARIABL BL

Internal corner, for Rapid 45-2 device installation trunking, type GK-53165. 90° internal corner for changing the direction of the Rapid 45-2 device installation trunking.

6276960

GA-ST90130RW

-

T-PIECE GA-ST90130 BL

T piece, symmetrical, for device installation trunking Rapid 80 type GA-S90130. T piece for branches of Rapid 80 GA aluminium device installation trunking.

6290097

ISSRM45FEL

-

COLUMN ISSRM45F ALU

Service pole, type ISSRM45F. ISS aluminium service pole with a flexible hose to the ceiling and a 45 mm system opening. Set consisting of:1 one-compartment pole with flexible hose to ceiling Total length: 2,300 mm 1 flexible hose, length: 1,500 mm1 aluminium cover Length: 2,300 mmThe design of this ISS service pole is based on an extremely slender, round aluminium profile, which has a smooth cover of the Rapid 45 device installation trunking series as its front side. The 45 mm system opening is suitable for direct acceptance of Modul 45® switching and connection devices. The floor plate as a stand, type SFISSF, and the hose connection to the ceiling, type SAISSF, should be ordered separately (see articles below).

6290095

ISSRM45FRW

-

COLUMN ISSRM45F BL

Service pole, type ISSRM45F. ISS aluminium service pole with a flexible hose to the ceiling and a 45 mm system opening. Set consisting of:1 one-compartment pole with flexible hose to ceiling Total length: 2,300 mm 1 flexible hose, length: 1,500 mm1 aluminium cover Length: 2,300 mmThe design of this ISS service pole is based on an extremely slender, round aluminium profile, which has a smooth cover of the Rapid 45 device installation trunking series as its front side. The 45 mm system opening is suitable for direct acceptance of Modul 45® switching and connection devices. The floor plate as a stand, type SFISSF, and the hose connection to the ceiling, type SAISSF, should be ordered separately (see articles below).

6112443

GA-FS53100EL

-

< PLANE R45-2 53X100 NOT VAR. ALU

Flat angle, for device installation trunking Rapid 45-2 type GA-53100. 90° aluminium flat angle for direction change of Rapid 45-2 GA... device installation trunking.Note:For anodised device installation trunking and fittings made from aluminium, light colour differences caused by permitted scatter due to the material and process conditions cannot be avoided (according to DIN 17 611). 45 mm devices can be clicked in directly. When using PC/ABS hood fittings, there may be colour differences due to the different materials.

6113450

GK-FS53165RW

-

< PLANE R45-2 53X165 NOT VARIAB BL

Flat angle, for device installation trunking Rapid 45-2 type GK-53165. Flat angle for changing the direction of the Rapid 45-2 device installation trunking.

6113040

GK-AS53100RW

-

< EXT R45-2 53X100 NOT VARIABL BL

GK-AS53100RW outer angle, non-variable 190x190x100 Polyvinyl chloride, PVC,

Outer angle, for Rapid 45-2 mechanism channel, type GK-53100. Fixed 90º external angle, for change of direction of Rapid 45-2 mechanism holder channels.

6113470

GK-E53165RW

-

END CAP R45-2 53X165 BL

End piece, for device installation trunking Rapid 45-2 type GK-53165. End piece for side closing of the Rapid 45-2 GK and GA 53165 device installation trunking.

6113474

GK-E53165AL

-

END CAP R45-2 53X165 THE

GK-E53165AL end cap, for Rapid 45-2 165 171x56x22 Polycarbonate/Acrylonitrile-butadiene-styren, PC/ABS,

Final part, for Rapid 45-2 mechanism channel, type GK-53165. End piece for side closure of the Rapid 45-2 GK and GA 53165 mechanism channels.

6114300

GKH-70170RW

-

CHANNEL RAPID80 LH 70X170 1C BL

Halog-free mechanism channel GKH-70170RW with perforations in the base 70x170x2000 pure white Polycarbonate/Acrylonitrile-butadiene-styren, PC/ABS

6113284

GK-E53130AL

-

END CAP R45-2 53X130 THE

End piece, for device installation trunking Rapid 45-2 type GK-53130. End piece for side closing of the Rapid 45-2 GK and GA 53130 device installation trunking.

6113280

GK-E53130RW

-

END CAP R45-2 53X130 BL

End piece, for device installation trunking Rapid 45-2 type GK-53130. End piece for side closing of the Rapid 45-2 GK and GA 53130 device installation trunking.

6112523

GA-IS53130EL

-

< INT R45-2 53X130 NOT VARIABL ALU

Internal corner, for device installation trunking Rapid 45-2 type GA-53130. Corner 90° aluminium for changing the direction of device installation trunking Rapid 45-2 GA...Note:For anodised device installation trunking and fittings made from aluminium, light colour differences caused by permitted scatter due to the material and process conditions cannot be avoided (according to DIN 17 611). 45 mm devices can be clicked in directly. When using PC/ABS hood fittings, there may be colour differences due to the different materials.

6114290

GKH-TW70

-

SEPTUM SEPARATOR LH RAPID80

Partition GKH-TW70. Partition made of halogen-free PC/ABS for mounting in Rapid 80 GKH (GA) device installation trunking or ISS service poles for installing cables of different voltage levels.

6113070

GK-IH53100RW

-

< INT RAPID45-2 53X100 VARIABL BL

GK-IH53100RW inner angle, variable 110x145x145 Polycarbonate/Acrylonitrile-butadiene-styrole, PC/ABS,

Cover for inner angle, for Rapid 45-2 mechanism channel, type GK-53100. Inner angle for direction change of Rapid 45-2 mechanism holder channels. The mouldings can be adjusted between 83° and 97°.

6113104

GK-TR53100AL

-

ADAPTER T RAPID 45-2 53X100 THE

T piece adapter, for device installation trunking Rapid 45-2 type 53100. T piece to create a 90° junction of the system size 53100 on the system size 53100.

6113100

GK-TR53100RW

-

ADAPTER T RAPID 45-2 53X100 BL

T piece adapter, for device installation trunking Rapid 45-2 type 53100. T piece to create a 90° junction of the system size 53100 on the system size 53100.

6112503

GA-53130EL

-

CHANNEL RAPID45-2 53X130 2CALU

GA-53130EL Mechanism Channel, Rapid 45-2, 2-compartment, Alu 53x130x2000 Aluminum, Alu, anodized

Device installation trunking Rapid 45-2, trunking width 130, trunking height 53. Aluminium device installation trunking complete with bottom and top part. The lower part is without base perforation. Note:For anodised device installation trunking and fittings made from aluminium, light colour differences caused by permitted scatter due to the material and process conditions cannot be avoided (according to DIN 17 611). 45 mm devices can be clicked in directly. When using PC/ABS hood fittings, there may be colour differences due to the different materials.

6279603

GA-D90210EL

-

CHANNEL GA-D90210 ALU

Device installation trunking Rapid 80, symmetrical, double, trunking width 210, trunking height 90. Device installation trunking Without base perforation suitable for direct wall mounting or mounting on panels. Over-lengths up to 6,000 mm for trunking bases and covers as well as other RAL colours can be provided on request. The visible surfaces of the device installation trunking are laminated.Note:For anodised device installation trunking and fittings made from aluminium, light colour differences caused by tolerance based on the material and process conditions, cannot be avoided (according to DIN 17 611). Alternatively, we recommend powder coating in the colour RAL 9006 (white aluminium).

6279600

GA-D90210RW

-

CHANNEL GA-D90210 BL

Device installation trunking Rapid 80, symmetrical, double, trunking width 210, trunking height 90. Device installation trunking Without base perforation suitable for direct wall mounting or mounting on panels. Over-lengths up to 6,000 mm for trunking bases and covers as well as other RAL colours can be provided on request. The visible surfaces of the device installation trunking are laminated.Note:For anodised device installation trunking and fittings made from aluminium, light colour differences caused by tolerance based on the material and process conditions, cannot be avoided (according to DIN 17 611). Alternatively, we recommend powder coating in the colour RAL 9006 (white aluminium).

6286802

ISS98KF

-

FIXING TIGHTEN ISS98 AND ISS133

Clamp fastening. Clamp fastening to fasten the telescopic profile of the ISS70110ST service pole to the support rails of false or suspended ceilings.

6114250

GKH-OTGFRW

-

CAP < PLANE R80 LH 70X130 1C BL