RAPID LFS Channel 45 - OBO BETTERMANN

6023081

TW BR-I

-

Bend radius for internal corner, Light grey, 7035, Polyvinylchloride, PVC

6023085

TW BR-A

-

Bend radius for external corner, Light grey, 7035, Polyvinylchloride, PVC

6023089

TW BR-F

-

Bend radius for flat angle, Light grey, 7035, Polyvinylchloride, PVC

6115775

GAD UEL

-

Design device installat. duct without cover, Anodised, Aluminium, Alu

GAD design device installation trunking. Base to create design device installation trunking of the GAD series. 45 mm system opening for acceptance of Modul 45 switch and connection devices and appropriate PVC and aluminium covers of the Rapid 45 series. The trunking base can be completed with trunking covers in the "Swing", "Soft" or "Style" design. The GAD OTA cover adapters are essential and must be planned on the trunking section with a max. spacing of 50 cm. A GAD OTD spacer must be placed between the trunking covers. In the as-delivered state, the 45 mm system is closed off with a black trunking cover.

6115789

GAD AEL

-

External corner, Design duct without cover, Anodised, Aluminium, Alu

6115795

GAD IEL

-

Internal corner, Design duct without cover, Anodised, Aluminium, Alu

6115825

OT GAD Swing EL

-

Cover for Design duct Design Swing, Anodised, Aluminium, Alu

Swing trunking cover, design trunking. Trunking cover to create a design device installation trunking of the GAD series. "Swing" design version for complete coverage of the system opening and the switching and plug-in devices. The GAD OTA cover adapters are essential and must be planned on the trunking section with a max. spacing of 50 cm. A GAD OTD spacer must be placed between the trunking covers. Standard version in anodised aluminium, different decoration on request.

6115835

OT GAD Soft EL

-

Cover for Design duct Design Soft, Anodised, Aluminium, Alu

Soft trunking cover, design trunking. Trunking cover to create a design device installation trunking of the GAD series. "Soft" design version for complete coverage of the system opening and the switching and plug-in devices. The GAD OTA cover adapters are essential and must be planned on the trunking section with a max. spacing of 50 cm. A GAD OTD spacer must be placed between the trunking covers. Standard version in anodised aluminium, different decoration on request.

6115845

OT GAD Style EL

-

Cover for Design duct Design Style, Anodised, Aluminium, Alu

Style trunking cover, design trunking. Trunking cover to create a design device installation trunking of the GAD series. "Style" design version for complete coverage of the system opening and the switching and plug-in devices. The GAD OTA cover adapters are essential and must be planned on the trunking section with a max. spacing of 50 cm. A GAD OTD spacer must be placed between the trunking covers. Standard version in anodised aluminium, different decoration on request.

6115851

OT A Swing EL

-

Cover ext. corner Design duct Design Swing, Anodised, Aluminium, Alu

External corner cover, Swing. Trunking cover for the external corner of the design device installation trunking of the GAD series. "Swing" design version for complete coverage of the system opening and the switching and plug-in devices.Standard version in anodised aluminium, different decoration on request.

6115855

OT A Soft EL

-

Cover ext. corner Design duct Design Soft, Anodised, Aluminium, Alu

External corner cover, Soft. Trunking cover for the external corner of the design device installation trunking of the GAD series. "Soft" design version for complete coverage of the system opening and the switching and plug-in devices. Standard version in anodised aluminium, different decoration on request.

6115865

OT A Style EL

-

Cover ext. corner Design duct Design Style, Anodised, Aluminium, Alu

External corner cover, Style. Trunking cover for the external corner of the design device installation trunking of the GAD series. "Style" design version for complete coverage of the system opening and the switching and plug-in devices. Standard version in anodised aluminium, different decoration on request.

6115875

OT I Swing EL

-

Cover ext. corner Design duct Design Swing, Anodised, Aluminium, Alu

Internal corner cover, Swing. Trunking cover for the internal corner of the design device installation trunking of the GAD series. "Swing" design version for complete coverage of the system opening and the switching and plug-in devices. Standard version in anodised aluminium, different decoration on request.

6115885

OT I Soft EL

-

Cover ext. corner Design duct Design Soft, Anodised, Aluminium, Alu

Internal corner cover, Soft. Trunking cover for the internal corner of the design device installation trunking of the GAD series. "Soft" design version for complete coverage of the system opening and the switching and plug-in devices.Standard version in anodised aluminium, different decoration on request.

6115895

OT I Style EL

-

Cover ext. corner Design duct Design Style, Anodised, Aluminium, Alu

Internal corner cover, Style. Trunking cover for the internal corner of the design device installation trunking of the GAD series. "Style" design version for complete coverage of the system opening and the switching and plug-in devices.

6115915

GAD EL Swing EL

-

End piece, Design duct, left Design Swing, Anodised, Aluminium, Alu

End piece, Swing, left. End piece for design device installation trunking of the GAD series. "Swing" design version. The end piece can only be used for closing on the left side. Standard version in anodised aluminium, different decoration on request.

6115925

GAD ER Swing EL

-

End piece, Design duct, right Design Swing, Anodised, Aluminium, Alu

6115935

GAD EL Soft EL

-

End piece, Design duct, left Design Soft, Anodised, Aluminium, Alu

6115945

GAD ER Soft EL

-

End piece, Design duct, right Design Soft, Anodised, Aluminium, Alu

6115955

GAD EL Style EL

-

End piece, Design duct, left Design Style, Anodised, Aluminium, Alu

6115965

GAD ER Style EL

-

End piece, Design duct, right Design Style, Anodised, Aluminium, Alu

End piece, Style, right. End piece for design device installation trunking of the GAD series. "Style" design version. The end piece can only be used for closing on the right side. Standard version in anodised aluminium, different decoration on request.

6115975

GAD OTA

-

Cover adapter for Design duct, Graphite black, 9011, Polyamide, PA

Cover adapter. Cover adapter for mounting on trunking bases and fittings of the GAD and Rapid IBIS design device installation trunking series. The cover adapter can be pushed into a guide on the base and is used to accept the trunking cover and keep it at the desired spacing. It is also used for bundled cable exits and can be moved into the lengthwise direction. A maximum spacing of 500 mm between the cover adapters must be maintained.

6115980

GAD OTD RW

-

Spacer for Design duct, Pure white, 9010, Polyamide, PA

Spacer. Spacer for insertion between the trunking covers of the GAD design device installation trunking series. The spacer ensures secure maintenance of a minimum spacing between trunking covers.

6115985

GAD OTD SW

-

Spacer for Design duct, Graphite black, 9011, Polyamide, PA

Spacer. Spacer for insertion between the trunking covers of the GAD design device installation trunking series. The spacer ensures secure maintenance of a minimum spacing between trunking covers.

6115995

GAD SB

-

Stabiliser plate for Design duct, Steel, St

Stabiliser plate. Stabiliser plate for the stabilisation of the system opening of the GAD design device installation trunking series. The panel is placed in the trunking base and supports the acceptance of covers and ensures a secure hold of the devices.

6116027

GEK-K53100

-

Device installation trunking Rapid 45, 53x100x2000, Pure white, 9010, Polyvinylchloride, PVC

6116051

GEK-K53160

-

Device installation trunking Rapid 45, 53x160x2000, Pure white, 9010, Polyvinylchloride, PVC

6116073

GEK-K53160-3

-

Device installation trunking Rapid 45, 53x160x2000, Pure white, 9010, Polyvinylchloride, PVC

GEK-K53160-3 mechanism channel, Rapid 45- 3 compartments 53x160x2000 Polyvinyl chloride, PVC,

Rapid 45-2 channel holder, channel width 160, channel height 53. Cover and channel base with holes for direct wall mounting. The 45 mm mechanism holders can be activated directly.

6116108

GEK-KOT45

-

Cover Rapid 45, 45x2000mm, Pure white, 9010, Polyvinylchloride, PVC

Cover. Trunking cover for closing the Rapid 45 device installation trunking.

6116116

OK-K 45

-

Cover fixing device Rapid 45, Stainless steel, grade 304, VA, 1.4301

Cover clip OK-K 45. Cover clip for better and easier cable routing in the Rapid 45 device installation trunking.