LFS Canal LKM - OBO BETTERMANN

6246966

LKM20020FS

-

Cable trunking with floor knock-outs, 20x20x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable duct, type LKM 20020. Duct cover and base with base perforation.Equipotential bonding is guaranteed between the cover and the base without any additional aids.

6246974

LKM20030FS

-

Cable trunking with floor knock-outs, 20x30x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable duct, type LKM 20030. Duct cover and base with base perforation. Equipotential bonding is guaranteed between the cover and the base without any additional aids. The LKM cable duct, type LKM 20030, has been tested for the maintenance of electrical function as a routing system according to DIN 4102 Part 12. Please note the cable types tested in the BSS fire protection systems division!

6246982

LKM30030FS

-

Cable trunking with floor knock-outs, 30x30x2000, Strip-galvanised, DIN EN 10147, Steel, St

6247016

LKM40060FS

-

Cable trunking with floor knock-outs, 40x60x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable duct, type LKM 40060. Duct cover and base with base perforation.Equipotential bonding is guaranteed between the cover and the base without any additional aids.

6247091

LKM60060FS

-

Cable trunking with floor knock-outs, 60x60x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable trunking, type LKM 60060. Trunking cover and base with base perforation.Equipotential bonding is guaranteed between the cover and the base without any additional aids. Note: LKM 60060 has no loop perforation in the base, a partition cannot be installed.

6247113

LKM60100FS

-

Cable trunking with floor knock-outs, 60x100x2000, Strip-galvanised, DIN EN 10147, Steel, St

LKM60100FS channel, with holes in the base 60x100x2000 Steel, St, galvanized in band, DIN EN 10346

Cable duct, type LKM 60100. Duct cover and base with base perforation. Equipotential bonding is guaranteed between the cover and the base without any additional aids. The LKM cable duct, type LKM 60100, has been tested for the maintenance of electrical function as a routing system according to DIN 4102 Part 12. Please note the cable types tested in the BSS fire protection systems division!The base contains loop perforation allowing the attachment of the partition.

6247148

LKM60150FS

-

Cable trunking with floor knock-outs, 60x150x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable trunking, type LKM 60150. Trunking cover and base with base perforation.Equipotential bonding is guaranteed between the cover and the base without any additional aids.The base contains loop perforation allowing the attachment of the partition.For ceiling mounting, always use the trunking clamp

6247164

LKM60200FS

-

Cable trunking with floor knock-outs, 60x200x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable trunking, type LKM 60200. Trunking cover and base with base perforation. Equipotential bonding is guaranteed between the cover and the base without any additional aids.The base contains loop perforation allowing the attachment of the partition.For ceiling mounting, always use the trunking clamp

6247194

LKM80080FS

-

Cable trunking with floor knock-outs, 80x80x2000, Strip-galvanised, DIN EN 10147, Steel, St

Cable trunking, type LKM 80080. Trunking cover and base with base perforation.Equipotential bonding is guaranteed between the cover and the base without any additional aids.

6247431

LKM SV20

-

Joint connector , 20mm, Electrogalvanised, DIN 50961, Steel, St

Joint connector LKM SV20. Joint connector to connect the bases. This creates the equipotential bonding between the trunking bases.

6247434

LKM SV30

-

Joint connector , 30mm, Electrogalvanised, DIN 50961, Steel, St

Joint connector LKM SV30. Joint connector to connect the bases. This creates the equipotential bonding between the duct bases.

6247458

LKM SV40

-

Joint connector , 40mm, Stainless steel, grade 301, VA, 1.4310

LKM SV40 union connector, 40mm Stainless steel 1.4310, V2A, 1.4310, Polished, with subsequent treatment

Joint connector LKM SV40. Joint connector to connect the bases. This creates the equipotential bonding between the duct bases.

6247466

LKM SV60

-

Joint connector , 60mm, Stainless steel, grade 301, VA, 1.4310

LKM SV60 union connector, 60mm Stainless steel 1.4310, V2A, 1.4310, Polished, with subsequent treatment

LKM SV60 Union. Union for the channel bases. This ensures the equipotential connection between the channel bases.

6247472

LKM SV80

-

Joint connector , 80mm, Steel, St

Joint connector LKM SV80. Joint connector to connect the bases. This creates the equipotential bonding between the duct bases.

6247490

LKM F40040FS

-

Flat angle with cover, 40x40mm, Strip-galvanised, DIN EN 10147, Steel, St

Flat angle, for cable trunking type LKM 40040. Flat angle including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6247504

LKM F40060FS

-

Flat angle with cover, 40x60mm, Strip-galvanised, DIN EN 10147, Steel, St

LKM F40060FS flat angle, with cover 40x60mm Steel, St, galvanized in strip, DIN EN 10346

Flat angle, for cable trunking type LKM 40060. Flat angle including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6247563

LKM A40040FS

-

External corner with cover, 40x40mm, Strip-galvanised, DIN EN 10147, Steel, St

External corner, for cable trunking type LKM 40040. External corner including cover for changing the direction of the LKM trunking.Equipotential bonding without additional aids, between base and cover

6247571

LKM A40060FS

-

External corner with cover, 40x60mm, Strip-galvanised, DIN EN 10147, Steel, St

External corner, for cable routing trunking type LKM 40060. External corner including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6247652

LKM I40040FS

-

Internal corner , 40x40mm, Strip-galvanised, DIN EN 10147, Steel, St

Internal corner, for cable trunking type LKM 40040. Internal corner for changing the direction of the LKM trunking.Equipotential bonding without additional aids, between base and cover

6247660

LKM I40060FS

-

Internal corner , 40x60mm, Strip-galvanised, DIN EN 10147, Steel, St

LKM I40060FS inner angle, 40x60mm Steel, St, strip galvanized, DIN EN 10346

Internal corner, for cable trunking type LKM 40060. Internal corner for changing the direction of LKM ducts.Equipotential bonding without additional aids, between base and cover

6247725

LKM T40040FS

-

T-piece with cover, 40x40mm, Strip-galvanised, DIN EN 10147, Steel, St

T piece, for cable trunking type LKM 40040. T piece including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6247733

LKM T40060FS

-

T-piece with cover, 40x60mm, Strip-galvanised, DIN EN 10147, Steel, St

T piece, for cable trunking type LKM 40060. T piece including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6247881

LKM E40040FS

-

End piece , 40x40mm, Strip-galvanised, DIN EN 10147, Steel, St

End piece, for cable trunking type LKM 40040. End piece for closing the LKM ducts.

6247903

LKM E40060FS

-

End piece , 40x60mm, Strip-galvanised, DIN EN 10147, Steel, St

End piece, for cable trunking type LKM 40060. End piece for closing the LKM ducts.

6247989

LKM F60060FS

-

Flat angle with cover, 60x60mm, Strip-galvanised, DIN EN 10147, Steel, St

Flat angle, for cable trunking type LKM 60060. Flat angle including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6248004

LKM F60100FS

-

Flat angle with cover, 60x100mm, Strip-galvanised, DIN EN 10147, Steel, St

Flat angle, for cable duct type LKM 60100. Flat angle including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6248012

LKM F60150FS

-

Flat angle with cover, 60x150mm, Strip-galvanised, DIN EN 10147, Steel, St

LKM F60150FS flat angle, with cover 60x150mm Steel, St, galvanized in strip, DIN EN 10346

Flat angle, for ducting system type LKM 60150. Flat angle, with cover included, to modify the direction of the LKM channels. Equipotential connection between the lid and the bottom of the channel without the need for any additional elements

6248020

LKM F60200FS

-

Flat angle with cover, 60x200mm, Strip-galvanised, DIN EN 10147, Steel, St

Flat angle, for cable trunking type LKM 60200. Flat angle including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6248047

LKM A60060FS

-

External corner with cover, 60x60mm, Strip-galvanised, DIN EN 10147, Steel, St

External corner, for cable trunking type LKM 60060. External corner including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover

6248063

LKM A60100FS

-

External corner with cover, 60x100mm, Strip-galvanised, DIN EN 10147, Steel, St

External corner, for cable duct type LKM 60100. External corner including cover for changing the direction of the LKM ducts.Equipotential bonding without additional aids, between base and cover