HLG-40H-48D MEANWELL AC-DC Single output LED driver Mix mode (CV+CC) with built-in PFC, Output 48VDC / 0.84A..

40W Single Output Switching Power Supply 40W Single Output Switching Power Supply
40W Single Output Switching Power SupplyFeatures : Features :
Features : HLG-40Hseries HLG-40Hseries
HLG-40Hseries F110 F110
F110MM SELVIP65 IP67 MM SELVIP65 IP67
MM SELVIP65 IP67 Universal AC input / Full range (up to 305VAC) Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC) Built-in active PFC function Built-in active PFC function
Built-in active PFC function Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Coolingby freeair convection Coolingby freeair convection
Coolingby freeair convection OCPpoint adjustable through output cable or internal potentiometer OCPpoint adjustable through output cable or internal potentiometer
OCPpoint adjustable through output cable or internal potentiometer IP67/ IP65design for indooror outdoor installations IP67/ IP65design for indooror outdoor installations
IP67/ IP65design for indooror outdoor installations Class 2 power unit Class 2 power unit
Class 2 power unit Three in onedimmingfunction(1B10Vdcor PWM signal or resistance) Three in onedimmingfunction(1B10Vdcor PWM signal or resistance)
Three in onedimmingfunction(1B10Vdcor PWM signal or resistance) Suitable for LED lighting andmovingsignapplications Suitable for LED lighting andmovingsignapplications
Suitable for LED lighting andmovingsignapplications Compliance to worldwide safety regulations for lighting Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location Suitable for dry / damp / wet location
Suitable for dry / damp / wet location 7 years warranty (Note.10) 7 years warranty (Note.10)
7 years warranty (Note.10) ( for 48V,54V only) ( for 48V,54V only)
( for 48V,54V only) ( except for 48V,54V ) ( except for 48V,54V )
( except for 48V,54V )HLG-40H-12 A HLG-40H-12 A
HLG-40H-12 A Blank: IP67rated. Cable for I/O connection. Blank: IP67rated. Cable for I/O connection.
Blank: IP67rated. Cable for I/O connection. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. B : IP67 rated.Constant current level adjustable through output cablewith 1B10Vdc or 10V PWM signal or resistance B : IP67 rated.Constant current level adjustable through output cablewith 1B10Vdc or 10V PWM signal or resistance
B : IP67 rated.Constant current level adjustable through output cablewith 1B10Vdc or 10V PWM signal or resistance D (option) : IP67 rated.Timer dimming function, contactMEAN WELL for details. D (option) : IP67 rated.Timer dimming function, contactMEAN WELL for details.
D (option) : IP67 rated.Timer dimming function, contactMEAN WELL for details.SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL HLG-40H-12HLG-40H-15HLG-40H-20HLG-40H-24HLG-40H-30HLG-40H-36HLG-40H-42HLG-40H-48HLG-40H-54 HLG-40H-12HLG-40H-15HLG-40H-20HLG-40H-24HLG-40H-30HLG-40H-36HLG-40H-42HLG-40H-48HLG-40H-54
HLG-40H-12HLG-40H-15HLG-40H-20HLG-40H-24HLG-40H-30HLG-40H-36HLG-40H-42HLG-40H-48HLG-40H-54 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 12V 12V
12V 15V 15V
15V 20V 20V
20V 24V 24V
24V 30V 30V
30V 36V 36V
36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.47.2 ~12V CONSTANT CURRENT REGION Note.47.2 ~12V
CONSTANT CURRENT REGION Note.47.2 ~12V 9 ~ 15V 9 ~ 15V
9 ~ 15V 12 ~ 20V 12 ~ 20V
12 ~ 20V 14.4 ~ 24V 14.4 ~ 24V
14.4 ~ 24V 18 ~ 30V 18 ~ 30V
18 ~ 30V 21.6 ~ 36V 21.6 ~ 36V
21.6 ~ 36V 25.2 ~ 42V 25.2 ~ 42V
25.2 ~ 42V 28.8 ~ 48V 28.8 ~ 48V
28.8 ~ 48V 32.4 ~ 54V 32.4 ~ 54V
32.4 ~ 54V RATED CURRENT RATED POWER RATED CURRENT RATED POWER
RATED CURRENT RATED POWER 3.33A2.67A 2A 1.67A 1.34A 1.12A 3.33A2.67A 2A 1.67A 1.34A 1.12A
3.33A2.67A 2A 1.67A 1.34A 1.12A 39.96W40.05W40W40.08W40.2W40.32W 39.96W40.05W40W40.08W40.2W40.32W
39.96W40.05W40W40.08W40.2W40.32W 0.96A 0.96A
0.96A 40.32W 40.32W
40.32W 0.84A 0.84A
0.84A 40.32W 40.32W
40.32W 0.75A 0.75A
0.75A 40.5W 40.5W
40.5W RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p 150mVp-p 150mVp-p
150mVp-p 200mVp-p 200mVp-p
200mVp-p 200mVp-p 200mVp-p
200mVp-p 200mVp-p 200mVp-p
200mVp-p 200mVp-p 200mVp-p
200mVp-p 300mVp-p 300mVp-p
300mVp-p 300mVp-p 300mVp-p
300mVp-p VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V 13.5 ~ 17V 13.5 ~ 17V
13.5 ~ 17V 17 ~ 22V 17 ~ 22V
17 ~ 22V 22 ~ 27V 22 ~ 27V
22 ~ 27V 27 ~ 33V 27 ~ 33V
27 ~ 33V 33 ~ 40V 33 ~ 40V
33 ~ 40V 40 ~ 46V 40 ~ 46V
40 ~ 46V 44 ~ 53V 44 ~ 53V
44 ~ 53V 49 ~ 58V 49 ~ 58V
49 ~ 58V OUTPUT OUTPUT
OUTPUTCURRENT ADJ. RANGE CURRENT ADJ. RANGE
CURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type only Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only 2 ~ 3.33A 2 ~ 3.33A
2 ~ 3.33A 1.6 ~ 2.67A 1.6 ~ 2.67A
1.6 ~ 2.67A 1.2 ~ 2A 1.2 ~ 2A
1.2 ~ 2A 1 ~ 1.67A 1 ~ 1.67A
1 ~ 1.67A 0.8 ~ 1.34A 0.8 ~ 1.34A
0.8 ~ 1.34A 0.67 ~ 1.12A 0.67 ~ 1.12A
0.67 ~ 1.12A 0.58 ~ 0.96A 0.5 ~ 0.84A 0.58 ~ 0.96A 0.5 ~ 0.84A
0.58 ~ 0.96A 0.5 ~ 0.84A 0.45 ~ 0.75A 0.45 ~ 0.75A
0.45 ~ 0.75A VOLTAGE TOLERANCENote.32.5% VOLTAGE TOLERANCENote.32.5%
VOLTAGE TOLERANCENote.32.5% 2.0% 2.0%
2.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5% 2.0%1.5%1.0%0.5%0.5%0.5% 2.0%1.5%1.0%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIMENote.8500ms, 80msat full load230VAC / 115VAC SETUP, RISE TIMENote.8500ms, 80msat full load230VAC / 115VAC
SETUP, RISE TIMENote.8500ms, 80msat full load230VAC / 115VAC HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VACat full load 16ms/230VAC 16ms/115VACat full load
16ms/230VAC 16ms/115VACat full load VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCYRANGE POWER FACTOR (Typ.) FREQUENCYRANGE POWER FACTOR (Typ.)
FREQUENCYRANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic"curve) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic"curve)
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic"curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER MAX. No. of PSUs on 16A CIRCUIT BREAKER
MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT LEAKAGE CURRENT
LEAKAGE CURRENT 86.5% 86.5% 88%88%88.5% 88.5% 86.5% 86.5% 88%88%88.5% 88.5%
86.5% 86.5% 88%88%88.5% 88.5% 0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC 0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC
0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC
COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 230VAC 12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 230VAC
12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 230VAC<0.75mA / 277VAC <0.75mA / 277VAC
<0.75mA / 277VAC 88.5% 88.5%
88.5% 89.5% 89.5%
89.5% 89.5% 89.5%
89.5% OVER CURRENTNote.495 ~ 108% OVER CURRENTNote.495 ~ 108%
OVER CURRENTNote.495 ~ 108% Protection type : Constant current limiting, recovers automaticallyafter fault condition is removed Protection type : Constant current limiting, recovers automaticallyafter fault condition is removed
Protection type : Constant current limiting, recovers automaticallyafter fault condition is removed PROTECTIONSHORT CIRCUITHiccup mode, recovers automaticallyafter fault condition is removed PROTECTIONSHORT CIRCUITHiccup mode, recovers automaticallyafter fault condition is removed
PROTECTIONSHORT CIRCUITHiccup mode, recovers automaticallyafter fault condition is removed 15 ~ 21V 15 ~ 21V
15 ~ 21V 18 ~ 24V 18 ~ 24V
18 ~ 24V 23 ~ 30V28 ~ 35V35 ~ 43V41 ~ 49V48 ~ 58V 23 ~ 30V28 ~ 35V35 ~ 43V41 ~ 49V48 ~ 58V
23 ~ 30V28 ~ 35V35 ~ 43V41 ~ 49V48 ~ 58V 54 ~ 65V 54 ~ 65V
54 ~ 65V 59 ~ 68V 59 ~ 68V
59 ~ 68V OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY TEMP. COEFFICIENT TEMP. COEFFICIENT
TEMP. COEFFICIENT VIBRATION VIBRATION
VIBRATION Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover -40 ~ +70C (Refer to "Derating Curve") -40 ~ +70C (Refer to "Derating Curve")
-40 ~ +70C (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 60C) 0.03%/C (0 ~ 60C)
0.03%/C (0 ~ 60C) 10 ~ 500Hz, 5G 12min./1cycle,period for72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle,period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle,period for72min. each along X, Y, Z axes SAFETY STANDARDS Note.7UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13independent,IP65 or IP67, J61347-1, J61347-2-13approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1 SAFETY STANDARDS Note.7UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13independent,IP65 or IP67, J61347-1, J61347-2-13approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1
SAFETY STANDARDS Note.7UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13independent,IP65 or IP67, J61347-1, J61347-2-13approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1 SAFETY & EMC SAFETY & EMC
SAFETY & EMCOTHERS OTHERS
OTHERS WITHSTANDVOLTAGE ISOLATIONRESISTANCE EMC EMISSION WITHSTANDVOLTAGE ISOLATIONRESISTANCE EMC EMISSION
WITHSTANDVOLTAGE ISOLATIONRESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV),criteria A 336.5Khrs min.MIL-HDBK-217F (25C) 336.5Khrs min.MIL-HDBK-217F (25C)
336.5Khrs min.MIL-HDBK-217F (25C) 171*61.5*36.8mm (L*W*H) 171*61.5*36.8mm (L*W*H)
171*61.5*36.8mm (L*W*H) 0.73Kg; 20pcs/15.6Kg/0.8CUFT 0.73Kg; 20pcs/15.6Kg/0.8CUFT
0.73Kg; 20pcs/15.6Kg/0.8CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25C of ambient temperature. 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25C of ambient temperature.
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25C of ambient temperature. 2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation andloadregulation. 3. Tolerance : includes setup tolerance, line regulation andloadregulation.
3. Tolerance : includes setup tolerance, line regulation andloadregulation. 4. Please refer to "DRIVING METHODSOF LED MODULE". 4. Please refer to "DRIVING METHODSOF LED MODULE".
4. Please refer to "DRIVING METHODSOF LED MODULE". 5. Derating maybe needed under low input voltages. Please check thestatic characteristics for more details. 5. Derating maybe needed under low input voltages. Please check thestatic characteristics for more details.
5. Derating maybe needed under low input voltages. Please check thestatic characteristics for more details. 6. A typeonly. 6. A typeonly.
6. A typeonly. 7. Safety andEMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18. 7. Safety andEMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
7. Safety andEMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18. 8. Length of setup time is measured at cold first start. TurningON/OFF thepower supply mayleadto increase of thesetup time. 8. Length of setup time is measured at cold first start. TurningON/OFF thepower supply mayleadto increase of thesetup time.
8. Length of setup time is measured at cold first start. TurningON/OFF thepower supply mayleadto increase of thesetup time. 9. Thepower supply is considered as a component thatwill be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 9. Thepower supply is considered as a component thatwill be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
9. Thepower supply is considered as a component thatwill be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 10. Refer to warranty statement. 10. Refer to warranty statement.
10. Refer to warranty statement. 11. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupplycanonly be used behind a switch without permanently connected to the mains. 11. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupplycanonly be used behind a switch without permanently connected to the mains.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupplycanonly be used behind a switch without permanently connected to the mains. File Name:HLG-40H-SPEC 2015-07-23 File Name:HLG-40H-SPEC 2015-07-23
File Name:HLG-40H-SPEC 2015-07-23