Product successfully added to your shopping cart
CLG-150-12B
MEANWELL
1
Available Ship on today
AC-DC Single output LED driver Mix mode (CV+CC) with PFC, Output 12VDC / 11A, IP67, cable output, Dimming with 1-10V
LED DRIVERS > CLG
* Brand new product in its original packaging covered by the warranties and certifications provided by MEANWELL
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Name | CLG-150-12B |
---|---|
Long Description | LED driver dimmable. Specially designed for powering LEDs directly in a steady stream. Format in metal boxIP67. Input range90-295Vca47-63Hz. Output in constant current11A. Range of output voltage with current mode constant9-12v dcaccording to demade the load. Power:132W. Efficiency typical:88%. Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%. Input class I with grounding. Factor corrector, power>0,95to 230vac at full load. Operating temperature range of caseTcfrom-30ºCup+70ºC. Dimensions (Length x Width x Height):222,2 x 68 x 38,8 mm 3 years of warranty. Manufacturer: MEAN WELL. The series CLG are LED Drvers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current You can also work in voltage mode constant giving a fixed voltage of 12V if the load is powered at constant voltage and does not overcome the maximum output power. With metal housing water-tight. The series CLG has a high reliability with active PFC. Burn test at 100% load. Suitable for applications of LED lighting, signage, mobile, and public lighting in dry environments, humid, and wet conditions . Complies with the requirements of security at the global level for lighting. This model is not recommended for dimming of LED strips, since the computer regulates reducing this crash the maximum output current. If the strip consumes less of the power of the equipment when we start to regulate it will do nothing, because the output current is giving is already decreasing. Nor do we lose 30% of power of the strip as in the low levels of regulation this can you blink, or have very low accuracy for the regulation in the low levels. If you need regular, LED strips, we recommend the series PWM. Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac). Con dimmers 1-10V we can only reach 10% of regulation without shutting down the output. Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are: MEAN WELL DAP-04S01 (compatible with any push button normally open). SIMON: 75317 BJC: 5TC8 425 LEGRAND: 0784 04 ABB- "NIESSEN": N2260.9 SIEMENS: 5TC8424 EFAPEL: Model 21210 LED BOX: Model LD1160188 OSRAM: Model DIM MCU JUNG: Model 240-10 We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
Country of Origin | China |
Manufacturer | MEAN WELL |
Product type | LED Driver |
Format | Box |
Subformato | IP67 |
Applications | Lighting |
Series | CLG-150 |
State | Do not Use for New Designs |
Warranty (Years) | 3,00 |
Height (mm) | 38.80 |
Width (mm) | 68.00 |
Long/Background | 222.20 |
Type of Entry CA | Single-phase |
AC input Min | 90,00 |
AC input Max | 295,00 |
Input frequency | 50 Hz, 60 Hz |
Input connector | Cable |
Intensity of Minimum Output (mA) | 11.000,00 |
Intensity of Output Maximum (mA) | 11.000,00 |
Output current mA | 5500, 6000, 7000, 8000, 9000, 10000, 11000 |
Power (W) | 132,00 |
Peak Power (W) | One hundred thirty two |
Dimming | 1-10V, Resistance 0-100K, PWM Signal 10V |
Output connector | Cable |
Isolation (V) | 3.750,00 |
Approvals | CCC, CE, PSE, UL |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.