LCM-25DA MEANWELL AC-DC Multi-Stage Output LED driver Active PFC, Output 0.35A/0.6A/0.7A/0.9A/1.05A, DALI an..

LED driver dimmable..

Specially designed for powering LEDs directly in a steady stream.

Format in plastic boxIP20.

Input range180-277Vca47-63Hz.

Current output selectable by micro-switch350, 500, 600, 700, 900 or 1050mA.

Efficiency typical:86%.

Regulation DALI0% to 100% of the intensity of output or push-button (PUSH-DALI). Certificate to DALI.

We can regulate by push-button by connecting the input line cord to a push-button normally open and then to the Push (up-regulation in primary). You can connect any number of drivers LCM-GIVES the same push-button.

Synchronization: we can sync up10 unitsvia the wires LCM-xxx-SYNC25 in such a way that by regulating a source other do the same regulation without the need to be connected to the bus DALI or push-button. We also make sure that if we use dimming by push button fonts are not desincronizarán.

Input class II without grounding.

Factor corrector, power>0.94to 230vac at full load.

Consumption without load <0.5 W.

Operating temperature range of caseTcfrom-30ºCup+60ºC.

Dimensions (Length x Width x Height):105 x 68 x 23mm.

3 years of warranty.

Manufacturer: MEAN WELL.

This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.

This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.Be sure to adjust the output current desired using the selector current. For more information please see the datasheet in the section attachments.

With plastic housing, designed for applications of LED lighting and architectural. Suitable for indoor lighting, offices, LED panels.Low ripple current, no flicker (flicker-free).

Compatible with any system DALI.