SP-150-3.3 MEANWELL AC-DC Enclosed power supply, Output 3.3VDC / 30A, PFC, free air convection

150W Single Output with PFC Function ASP-150series 150W Single Output with PFC Function ASP-150series
150W Single Output with PFC Function ASP-150series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFC function,PF>0.95 Built-in active PFC function,PF>0.95
Built-in active PFC function,PF>0.95 Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection High power density 8.4 w/in3 High power density 8.4 w/in3
High power density 8.4 w/in3 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test No load power consumption-1W@240VAC No load power consumption-1W@240VAC
No load power consumption-1W@240VAC ZCS/ZVS technology dissipation reducepower ZCS/ZVS technology dissipation reducepower
ZCS/ZVS technology dissipation reducepower 3 years warranty 3 years warranty
3 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE ASP-150-12 ASP-150-15 ASP-150-20 ASP-150-24 TO ASP-150-48 ASP-150-12 ASP-150-15 ASP-150-20 ASP-150-24 TO ASP-150-48
ASP-150-12 ASP-150-15 ASP-150-20 ASP-150-24 TO ASP-150-48 12V 15V 20V 24V 48V 12V 15V 20V 24V 48V
12V 15V 20V 24V 48V RATED CURRENT RATED CURRENT
RATED CURRENT 11A9.5A7.5A6.3A 11A9.5A7.5A6.3A
11A9.5A7.5A6.3A 3.2 3.2
3.2 CURRENT RANGE RATED POWER CURRENT RANGE RATED POWER
CURRENT RANGE RATED POWER 0 ~ 11A0 ~ 9.5A0 ~ 7.5 0 ~ 11A0 ~ 9.5A0 ~ 7.5
0 ~ 11A0 ~ 9.5A0 ~ 7.5 132W142.5W 150W 132W142.5W 150W
132W142.5W 150W 0 ~ 6.3 0 ~ 6.3
0 ~ 6.3 151.2 W 151.2 W
151.2 W 0 ~ 3.2 0 ~ 3.2
0 ~ 3.2 153.6 W 153.6 W
153.6 W RIPPLE & NOISE (max.) Note.2150mVp-p 180mVp-p200mVp-p240mVp-p240mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p 180mVp-p200mVp-p240mVp-p240mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p 180mVp-p200mVp-p240mVp-p240mVp-p 11 ~ 13.2V14 ~ 17V 17 ~ 22V 22 ~ 27V45.6 ~ 52.8 V 11 ~ 13.2V14 ~ 17V 17 ~ 22V 22 ~ 27V45.6 ~ 52.8 V
11 ~ 13.2V14 ~ 17V 17 ~ 22V 22 ~ 27V45.6 ~ 52.8 V OUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of Fixed. Can be modified between the range above by factory Fixed. Can be modified between the range above by factory
Fixed. Can be modified between the range above by factory VOLTAGE TOLERANCE Note.32.0% 2.0% 1.0%1.0%1.0% VOLTAGE TOLERANCE Note.32.0% 2.0% 1.0%1.0%1.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 1.0%1.0%1.0% LINE REGULATION LINE REGULATION
LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5%0.5% 0.5%0.5%
0.5%0.5% LOAD REGULATION SETUP, RISE TIME LOAD REGULATION SETUP, RISE TIME
LOAD REGULATION SETUP, RISE TIME 1.0% 1.0%
1.0% 3000ms, 80ms at full load 3000ms, 80ms at full load
3000ms, 80ms at full load 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5%of INPUT INPUT
INPUT HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)
HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load
50ms/230VAC16ms/115VAC at full load 90 ~ 264VAC127 ~ 370VDC 90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.95/230VAC PF0.98/115VAC at full load PF0.95/230VAC PF0.98/115VAC at full load
PF0.95/230VAC PF0.98/115VAC at full load 88%88%90% 88%88%90%
88%88%90% 2A/115VAC1A/230VAC COLD START 80A/230VAC 2A/115VAC1A/230VAC COLD START 80A/230VAC
2A/115VAC1A/230VAC COLD START 80A/230VAC <2mA / 240VAC <2mA / 240VAC
<2mA / 240VAC 105 ~ 135% rated output power 105 ~ 135% rated output power
105 ~ 135% rated output power90% 90%
90%89% 89%
89% The OVERHEAD of The OVERHEAD of
The OVERHEAD of Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.7 ~ 16.2 V 13.7 ~ 16.2 V
13.7 ~ 16.2 V 17.5 ~ 20.25V22.5 ~ 28V 17.5 ~ 20.25V22.5 ~ 28V
17.5 ~ 20.25V22.5 ~ 28V 27.5 ~ 32.4 V 27.5 ~ 32.4 V
27.5 ~ 32.4 V 53.3 ~ 64.8 V 53.3 ~ 64.8 V
53.3 ~ 64.8 V PROTECTION PROTECTION
PROTECTIONENVIRONMENT ENVIRONMENT
ENVIRONMENT OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE THE OVER TEMPERATURE WORKING TEMP. THE OVER TEMPERATURE WORKING TEMP.
THE OVER TEMPERATURE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of The VIBRATION The VIBRATION
The VIBRATION Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover 90C10C(RTH2) detect on heatsink of power transistor 90C10C(RTH2) detect on heatsink of power transistor
90C10C(RTH2) detect on heatsink of power transistor Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover -20 ~ +60 ° C (Refer to "Reduction Curve") -20 ~ +60 ° C (Refer to "Reduction Curve")
-20 ~ +60 ° C (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH -20 ~ +85℃, 10 ~ 95% RH
-20 ~ +85℃, 10 ~ 95% RH 0.05%/C (0 ~ 50 ° C) 0.05%/C (0 ~ 50 ° C)
0.05%/C (0 ~ 50 ° C) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes SECURITY STANDARDSUL60950-1, CB(IEC60950-1) approved SECURITY STANDARDSUL60950-1, CB(IEC60950-1) approved
SECURITY STANDARDSUL60950-1, CB(IEC60950-1) approved SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION PACKING MTBF DIMENSION PACKING
MTBF DIMENSION PACKING I/P-O/P:4.25 KVDC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P:4.25 KVDC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC
I/P-O/P:4.25 KVDC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A 149.3 Khrs min.MIL-HDBK-217F (25C) 149.3 Khrs min.MIL-HDBK-217F (25C)
149.3 Khrs min.MIL-HDBK-217F (25C) 169*60.7*28.5 mm (L*W*H) 169*60.7*28.5 mm (L*W*H)
169*60.7*28.5 mm (L*W*H) 0.32 Kg; 48pcs/15.8 Kg/0.79 CUFT 0.32 Kg; 48pcs/15.8 Kg/0.79 CUFT
0.32 Kg; 48pcs/15.8 Kg/0.79 CUFT NOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) 5. Heat sink HS1,HS3 & HS2,HS3 can not be shorted. 5. Heat sink HS1,HS3 & HS2,HS3 can not be shorted.
5. Heat sink HS1,HS3 & HS2,HS3 can not be shorted. File name:ASP-150-SPEC2015-07-17 File name:ASP-150-SPEC2015-07-17
File name:ASP-150-SPEC2015-07-17