MES30A-7P1J MEANWELL AC-DC Single output medical desktop adaptor with 3 pin IEC320-C14 input socket, Output ..

16.5-30W AC-DC Single Output and Medical Type Desktop M E S At 3 0 s e r i e s 16.5-30W AC-DC Single Output and Medical Type Desktop M E S At 3 0 s e r i e s
16.5-30W AC-DC Single Output and Medical Type Desktop M E S At 3 0 s e r i e sFeatures : Features :
Features : EUniversal AC input / Full range EUniversal AC input / Full range
EUniversal AC input / Full range E3 pole AC inlet IEC320-C14 E3 pole AC inlet IEC320-C14
E3 pole AC inlet IEC320-C14 ELow leakage current <300gA ELow leakage current <300gA
ELow leakage current <300gA EClass I power ( with earthpin) EClass I power ( with earthpin)
EClass I power ( with earthpin) EFull output 3~48V safety approval EFull output 3~48V safety approval
EFull output 3~48V safety approval EProtections: short circuit / Overload / Over voltage / Over temperature. EProtections: short circuit / Overload / Over voltage / Over temperature.
EProtections: short circuit / Overload / Over voltage / Over temperature. EFully closed the plastic case EFully closed the plastic case
EFully closed the plastic case EMedical safety approved (MOPP level) EMedical safety approved (MOPP level)
EMedical safety approved (MOPP level) EFix switching frequency and regulation EFix switching frequency and regulation
EFix switching frequency and regulation ETopology: Top switch circuit ETopology: Top switch circuit
ETopology: Top switch circuit TRAVELED power indicator TRAVELED power indicator
TRAVELED power indicator EApprovals: UL / CUL / TUV / CB / CE EApprovals: UL / CUL / TUV / CB / CE
EApprovals: UL / CUL / TUV / CB / CE E2 year warranty E2 year warranty
E2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. MES30A0P1J MES30A1P1J MES30A11P1J MES30A2P1J MES30A3P1J MES30A4P1J MES30A5P1J MES30A6P1J MES30A7P1J MES30A8P1J MES30A0P1J MES30A1P1J MES30A11P1J MES30A2P1J MES30A3P1J MES30A4P1J MES30A5P1J MES30A6P1J MES30A7P1J MES30A8P1J
MES30A0P1J MES30A1P1J MES30A11P1J MES30A2P1J MES30A3P1J MES30A4P1J MES30A5P1J MES30A6P1J MES30A7P1J MES30A8P1J MES30A-0 MES30A-1 MES30A-1-1 MES30A-2 MES30A-3 MES30A-4 MES30A-5 MES30A-6 MES30A-7 MES30A-8 MES30A-0 MES30A-1 MES30A-1-1 MES30A-2 MES30A-3 MES30A-4 MES30A-5 MES30A-6 MES30A-7 MES30A-8
MES30A-0 MES30A-1 MES30A-1-1 MES30A-2 MES30A-3 MES30A-4 MES30A-5 MES30A-6 MES30A-7 MES30A-8 DC VOLTAGENote.23.3V5V 7.5V9V 12V 15V 18V 24V 28V 48V DC VOLTAGENote.23.3V5V 7.5V9V 12V 15V 18V 24V 28V 48V
DC VOLTAGENote.23.3V5V 7.5V9V 12V 15V 18V 24V 28V 48V RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER 5A 5A 3.33A3.33A2.5A2.0A1.66A1.25A1.07A0.62A 5A 5A 3.33A3.33A2.5A2.0A1.66A1.25A1.07A0.62A
5A 5A 3.33A3.33A2.5A2.0A1.66A1.25A1.07A0.62A 0 - 5 0 - 5 0 - 3.33A0 -3.33 0 - 2.5A0 - 2.0A0 - 1.66A0 - 1.25A0 - 1.07A0 - 0.62 A 0 - 5 0 - 5 0 - 3.33A0 -3.33 0 - 2.5A0 - 2.0A0 - 1.66A0 - 1.25A0 - 1.07A0 - 0.62 A
0 - 5 0 - 5 0 - 3.33A0 -3.33 0 - 2.5A0 - 2.0A0 - 1.66A0 - 1.25A0 - 1.07A0 - 0.62 A 16.5 W 25W25W30W30W30W30W30W30W30W 16.5 W 25W25W30W30W30W30W30W30W30W
16.5 W 25W25W30W30W30W30W30W30W30W OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.330mVp-p30mVp-p40mVp-p50mVp-p50mVp-p60mVp-p70mVp-p80mVp-p100mVp-p100mVp-p RIPPLE & NOISE (max.) Note.330mVp-p30mVp-p40mVp-p50mVp-p50mVp-p60mVp-p70mVp-p80mVp-p100mVp-p100mVp-p
RIPPLE & NOISE (max.) Note.330mVp-p30mVp-p40mVp-p50mVp-p50mVp-p60mVp-p70mVp-p80mVp-p100mVp-p100mVp-p VOLTAGE ADJ. Fixed RANGE VOLTAGE ADJ. Fixed RANGE
VOLTAGE ADJ. Fixed RANGE VOLTAGE TOLERANCE Note.48.0% VOLTAGE TOLERANCE Note.48.0%
VOLTAGE TOLERANCE Note.48.0% -5% and +8% -5% and +8%
-5% and +8% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0%
4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% LINE REGULATIONNote.51.0% 1.0%
LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.68.0% LOAD REGULATIONNote.68.0%
LOAD REGULATIONNote.68.0% -5% and +8% -5% and +8%
-5% and +8% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0%
4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% INPUT INPUT
INPUT The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) Input CURRENT (max.)
Input CURRENT (max.) 300 ms, 50 ms, 16msat full load 300 ms, 50 ms, 16msat full load
300 ms, 50 ms, 16msat full load 90 - 264VAC135 - 370VDC 90 - 264VAC135 - 370VDC
90 - 264VAC135 - 370VDC 47 - 63Hz 47 - 63Hz
47 - 63Hz 56%70%72%74%76% 56%70%72%74%76%
56%70%72%74%76% 0.8 A / 100VAC 0.8 A / 100VAC
0.8 A / 100VAC 35A / 230VAC 35A / 230VAC
35A / 230VAC 78%78%80%80%82% 78%78%80%80%82%
78%78%80%80%82% The LEAKAGE CURRENT (max.) Note.7 Earth leakage current < 300gA/264VAC , Touch current < 60gA/264VAC The LEAKAGE CURRENT (max.) Note.7 Earth leakage current < 300gA/264VAC , Touch current < 60gA/264VAC
The LEAKAGE CURRENT (max.) Note.7 Earth leakage current < 300gA/264VAC , Touch current < 60gA/264VACOVERLOAD The OVERHEAD of
The OVERHEAD of 112 - 250%rated output power 112 - 250%rated output power
112 - 250%rated output power 150-350%of rated output power 150-350%of rated output power
150-350%of rated output power PROTECTION PROTECTION
PROTECTION OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE THE OVER TEMPERATURE WORKING TEMP. THE OVER TEMPERATURE WORKING TEMP.
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITY
WORKING HUMIDITY Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 - 140% rated output voltage 110 - 140% rated output voltage
110 - 140% rated output voltage Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed Tj 135J typically (IC1) detect on main control IC Tj 135J typically (IC1) detect on main control IC
Tj 135J typically (IC1) detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 - +65J (Refer to the "Reduction Curve") 0 - +65J (Refer to the "Reduction Curve")
0 - +65J (Refer to the "Reduction Curve") 20% - 90% RH non-condensing 20% - 90% RH non-condensing
20% - 90% RH non-condensing ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -20 - +85J, 10% - 95% RH -20 - +85J, 10% - 95% RH
-20 - +85J, 10% - 95% RH 0.03% / J ( 0 - 50J) 0.03% / J ( 0 - 50J)
0.03% / J ( 0 - 50J) 10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note. 8) (Note. 8)
(Note. 8)OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING EMC IMMUNITY MTBF DIMENSION PACKING
EMC IMMUNITY MTBF DIMENSION PACKING PLUG PLUG
PLUG CABLE CABLE
CABLE I/P-O/P: 5656VDC , I/P-FG: 2828VDC I/P-O/P: 5656VDC , I/P-FG: 2828VDC
I/P-O/P: 5656VDC , I/P-FG: 2828VDC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55011(CISPR11) class B, EN61000-3-2,3 I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55011(CISPR11) class B, EN61000-3-2,3
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55011(CISPR11) class B, EN61000-3-2,3 Compliance EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11) light industry level, criteria A Compliance EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11) light industry level, criteria A
Compliance EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11) light industry level, criteria A 400Khrs min. MIL-HDBK-217F (25J) 400Khrs min. MIL-HDBK-217F (25J)
400Khrs min. MIL-HDBK-217F (25J) 108*67*36mm (L*W*H) 108*67*36mm (L*W*H)
108*67*36mm (L*W*H) 0.3 kg ;54pcs/ 20kg / CARTON 0.3 kg ;54pcs/ 20kg / CARTON
0.3 kg ;54pcs/ 20kg / CARTON Standard type P1J: 2.1 r * 5.5 r * 11mm, turning fork type, center positive for stock ; Other type available by customer requested Standard type P1J: 2.1 r * 5.5 r * 11mm, turning fork type, center positive for stock ; Other type available by customer requested
Standard type P1J: 2.1 r * 5.5 r * 11mm, turning fork type, center positive for stock ; Other type available by customer requested SPT-2 16AWG 4FT for 3.3 - 7.5 V ; UL1185 18AWG 6ft for 9-48V SPT-2 16AWG 4FT for 3.3 - 7.5 V ; UL1185 18AWG 6ft for 9-48V
SPT-2 16AWG 4FT for 3.3 - 7.5 V ; UL1185 18AWG 6ft for 9-48VNOTE NOTE
NOTE 1.All the parameters arespecified at 230 vac input, ratedload,25J 70% relative humidity environment. 1.All the parameters arespecified at 230 vac input, ratedload,25J 70% relative humidity environment.
1.All the parameters arespecified at 230 vac input, ratedload,25J 70% relative humidity environment. 2.DC voltage: The outputvoltage setat point measure by plug terminal & 50% load. 2.DC voltage: The outputvoltage setat point measure by plug terminal & 50% load.
2.DC voltage: The outputvoltage setat point measure by plug terminal & 50% load. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 4.Tolerence: includes set up tolerance, line regulation, load regulation.
4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% ratedload. 6.Load regulation is measured from 0% to 100% ratedload.
6.Load regulation is measured from 0% to 100% ratedload. 7.Touch currentwas measured from the main entrance to the DC output. 7.Touch currentwas measured from the main entrance to the DC output.
7.Touch currentwas measured from the main entrance to the DC output. 8.The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 8.The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
8.The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.
EMC directives. File name:MES30A-SPEC2013-01-15 File name:MES30A-SPEC2013-01-15
File name:MES30A-SPEC2013-01-15