4180605 SC 1 1X1 WH LAPP Multi-Standard SC 1 1X1 WH

Benefits

• For use in the most important global markets
• Reduction in technical documentation
• Easy storage
• Increases the cost-effectiveness of the production process

Application range

• Factory wiring
• Internal wiring of devices
• Control cabinet wiring

Product features

• Flame-retardant according IEC 60332-1-2
• Flame-retardant according to UL VW1/CSA FT1
• Oil-resistant

Norm references / Approvals

• Multi-standard cables have conductor strands with nominal sizes in mm² or AWG/kcmil. The master size is mentioned in the table below, while the equivalent size of the other system can be found in the Appendix T16 of this catalogue. For this related secondary size the cross-section of the conductor mostly works out to be greater than the
  specified nominal value.
• Cable type certifications: <HAR> H05V-K acc. EN 50525-2-31, UL AWM
  styles 1007 & 1569 (by UL acc. UL standard UL 758, U.I. Lapp GmbH's UL AWM file number: E63634), CSA AWM I A/B (by CSA acc. CSA standard CSA
  C22.2 No. 210-05, CSA class 5851-01)

Product Make-up

• Fine-wire strand made of tinned-copper wires
• Special PVC-based core insulation

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000993
• ETIM 5.0 Class-Description: Single core cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000993
• ETIM 6.0 Class-Description: Single core cable

Conductor stranding

• Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5

Minimum bending radius

• 4 x outer diameter (OD) for normal use; 2 x OD for cautions bending

Nominal voltage

• HAR / IEC: U0/U: 300/500 V;
  UL (AWM): U: 300 V;
  CSA (AWM I A/B): U: 300 V

Test voltage

• 2000 V

Temperature range

• Fixed installation:
  HAR/IEC: -40°C to +70°C;
  UL (AWM): up to +105°C;
  CSA (AWM I A/B): up to +105°C