1244001 ÖLFLEX HEAT 125 SC 1X70 BK LAPP ÖLFLEX HEAT 125 SC 1X70 BK

Benefits

• For safety in areas with high density of people
• Reduction of flame propagation, density and toxicity of smoke gases in event of fire
• Minimises damage to buildings and equipment caused by the formation of toxic acid fumes in fires
• Certified for maritime applications

Application range

• For the wiring and connection of lighting, heating appliances, control cabinets, and distributors in mechanical and plant engineering
• For installation in tubes, on, in and under plaster as well as in closed installation ducts
• Coil winding, electromagnets, pumps, electrical systems
• Heat treatment plants, pressure die casting, heating and cooling technology
• Suitable for assembling cable harnesses and wiring during switch cabinet installation

Product features

• Fire behaviour:
  - Flame-retardant (IEC 60332-1-2)
  - Halogen-free (IEC 60754-1)
  - No corrosive gases (IEC 60754-2)
  - Low smoke density (IEC 61034-2)
  - Low toxicity (EN 50305)
• Extended fire behaviour:
  H05Z-K (0,5mm² up to 1,0mm²):
  see data sheet
  H07Z-K (≥ 1,5mm²):
  no fire propagation according to IEC 60332-3-24 respectively IEC 60332-3-25
• Oil-resistant according to DIN EN 50290-2-22 (TM54)
• Abrasion and notch-resistant
• UV-resistant according to ISO 4892-2, method A, and ozone resistant acc. to EN 50396 resp. VDE 0473-396, method B

Norm references / Approvals

• Type H05Z-K and H07Z-K according to EN 50525-3-41 with advanced features
• DNV GL certificate no. TAE00003NF

Product Make-up

• Fine-wire, tinned-copper conductor
• Electron beam cross-linked polyolefin copolymer insulation

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000993
• ETIM 5.0 Class-Description: Single core cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000993
• ETIM 6.0 Class-Description: Single core cable

Conductor stranding

• Fine wire acc. to VDE 0295, class 5 / IEC 60228 class 5 from 0.5 mm²

Minimum bending radius

• Fixed installation: 4 x outer diameter

Nominal voltage

• Up to 1.0mm² U0/U 300/500 V
  From 1.5mm² U0/U 450/750 V
• 0.6/1kV from 1.5 mm² in the case of fixed and protected installation

Test voltage

• 4000 V

Temperature range

• Fixed installation: -55°C to +125°C
  Temporary (3.000h): up to +145°C