0155010 KEL Fe/CuNi LX 24x1,5 DIN LAPP Extension and compensating cables, PVC insulated with and without ste..

Product Make-up

• Version Y:
  - Fine-wire conductor alloy
  - PVC core insulation
  - Cores twisted into layers
  - PVC outer sheath
• Version SY:
  - Design as version Y
  - Additional galvanised steel wire braiding
  - PVC outer sheath
• Version ST:
  - Design as verison Y
  - Cores twisted in pairs,
  pairs twisted in layers
  - Aluminium foil screening + drain wire
  - PVC outer sheath
• Design, for example PVC-PVC-S-PVC:
  - PVC core insulation
  - PVC inner sheath
  - Steel wire braiding
  - PVC outer sheath
• Design, for example PVC-ST-PVC:
  - PVC core insulation
  - STatic foil screen
  - PVC outer sheath
• Colour identity code
  DIN 43710
  Negative conductor and outer sheath:
  Fe/CuNi: blue
  NiCr/Ni: green
  PtRh/Pt: white
  Positive conductor: always red
  IEC 60 584
  Positive conductor and outer sheath:
  Fe/CuNi: black
  NiCr/Ni: green
  PtRh/Pt: orange
  Negative conductor: always white
• Extension-conductor alloys are identified
  with X, e.g. JX (Fe/CuNi)
  Compensating-conductor alloys are
  identified with C, e.g. KCA (NiCr/Ni)

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000838
• ETIM 5.0 Class-Description: Thermocouple cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000838
• ETIM 6.0 Class-Description: Thermocouple cable

Core identification code

• From 4 cores in pairs with consecutively marked numbers (1-1, 2-2, 3-3, 4-4...)

Based on

• Limiting deviation in accordance with DIN and IEC in accordance with class 2

Conductor stranding

• 48 x 0.20 mm

Minimum bending radius

• For flexible use:
  12.5 x outer diameter
  Type SY with steel braid:
  15 x outer diameter
  Type ST with foil screen:
  15 x outer diameter

Temperature range

• (referring to insulation and sheath material)
  Flexing: -5°C to +80°C
• Fixed installation: -40°C to +80°C