00122043 ÖLFLEX 450 P 5G1,5 LAPP Abrasion and oil-resistant cable for handheld equipment with wear indicator

Benefits

• Good cost-benefit ratio
• Resistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media
• The signal colour of the outer sheath increases safety and visual perception
• Serious mechanical damages of the yellow outer jacket become visible due to the red inner sheath

Application range

• Portable handheld electrical devices such as drills, sanders, jig saws or grinders
• Power or extension cord
• Portable devices for the home and garden
• Under consideration of the temperature range also suitable for outdoor use

Product features

• Good oil resistance
• Abrasion and notch-resistant
• Flame-retardant according IEC 60332-1-2
• Low-adhesive surface
• Resistant to hydrolysis and microbes

Norm references / Approvals

• Based on VDE 0250 / 0285

Product Make-up

• Fine-wire, bare copper conductor
• Core insulation: Based on PVC
• Cores twisted together
• Inner sheath: PVC - colour red
• Outer sheath: PUR – colour yellow

Classification ETIM 5

• ETIM 5.0 Class-ID: EC001578
• ETIM 5.0 Class-Description: Flexible cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC001578
• ETIM 6.0 Class-Description: Flexible cable

Core identification code

• Colours according to VDE 0293-308, refer to Appendix T9

Conductor stranding

• Fine wire according to VDE 0295,
  class 5/IEC 60228 class 5

Minimum bending radius

• Occasional flexing: 15 x outer diameter
• Fixed installation: 4 x outer diameter

Nominal voltage

• U0/U: 300/500 V

Test voltage

• 3000 V

Protective conductor

• G = with GN-YE protective conductor
• X = without protective conductor

Temperature range

• Occasional flexing: -5°C to +70°C
• Fixed installation: -40°C to +80°C