Display - Type
Color display, TFT
Resolution
WVGA
800 x 480 Pixel
Number of colours
64 k Colours
Contrast ratio (Normally)
Normally 300:1
Brightness
Normally 250 cd/m2
Back-lighting
LED
dimmable via software
Service life of back-lighting
Normally 40000 h
Resistive touch protective screen
Touch sensor (glass with foil)
Technology
Resistive-Touch
4 wire
Touch sensor
Glass with film
Processor
RISC CPU, 32 Bit, 400 MHz
Internal memory
DRAM (OS, Program and data memory): 64 MByte
NAND-Flash (can be used for data backup): approx. 128 MByte available
NVRAM (retained data): approx. 32 KByte available
External memory
SD Memory Card Slot: SDA Specification 1.00
Cooling
Fanless CPU and system cooling, natural convection-based passive cooling
Back-up of real-time clockBattery (service life)
non-replaceable, CR2032 soldered in
Back-up of real-time clockBackup (time at zero voltage)
Normally 10 years
Visualisation software
GALILEO
EPAM
XSOFT-CODESYS-2
XSOFT-CODESYS-3
PLC-Programming software
XSOFT-CODESYS-2
XSOFT-CODESYS-3
PLC-licence
PLC licence inclusive
Operating system
Windows CE 5.0 (licence incl.)
Interfaces, communication
built-in interfaces
1 x Ethernet 10/100 Mbps
1 x RS232
2 x CANopen®/easyNet (electrically isolated)
1 x USB host 2.0
1 x USB device
USB Host
2 x USB 2.0 (1.5 - 12 Mbit/s), not galvanically isolated
USB device
USB 2.0, not galvanically isolated
RS-232
RS232 (Sucom A), not isolated (Sub-D 9.pin plug, UNC)
RS-485
RS-485, not galvanically isolated (SUB-D plug 9 pole, UNC)
CAN
CAN, not galvanically isolated (SUB-D plug 9 pole, UNC)
Profibus
PROFIBUS, not galvanically isolated, max. 1.5 MBit/s (SUB-D socket 9 pole, UNC)
Ethernet
100Base-TX/10Base-T
Nominal voltage
24 V DC SELV (safety extra low voltage)
permissible voltage
Effective: 19.2-30.0 V DC (rated operating voltage -20%/+25%)
Absolute with ripple: 18,0-31,2 V DC
Battery powered: 18,0-31,2 V DC (rated operating voltage -25%/+30%)
35 V DC for a duration of < 100 ms
Voltage dips
≤ 10 ms from rated voltage (24 V DC)
5 ms from undervoltage (19.2 V DC) ms
Power consumption [Pmax.]
10 W
Note on power consumption
Basic device
USB Slave to USB Host: 2.5
Total: 9.5
Note on heat dissipation
Heat dissipation with power consumption for 24 V
8.5 W for basic device + 2.5 W for USB module
Siemens MPI, (optional)
yes
Type of fuse
Yes (fuse not accessible)
Potential isolation
no potential isolation
Housing material
Metal, anodized
Front type
without front plate
Dimensions (W x H x D)
188 x 123 x 39 mm
flush mounted
Clearance: W x H x D ≥ 30 mm (1.18")
Inclination from vertical: ±45° (if using natural convection)
Degree of protection (IEC/EN 60529, EN50178, VBG 4)
IP65 (at front), IP20 (at rear)
ApprovalsApprovals
cUL (UL508)
EAC
ApprovalsExplosion protection (according to ATEX 94/9/EC)
II 3D Ex II T70°C IP5x: Zone 22, Category 3D
Approvalsshipping classification
DNV GL
Applied standards and directivesEMC
(in relation to CE)
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Applied standards and directivesProduct standards
EN 50178
EN 61131-2
Applied standards and directivesSecurity
EN 60950
UL 60950
Mechanical shock resistance
according to IEC 60068-2-27 g
Vibration
according to IEC/EN 60068-2-6
Climatic environmental conditionsAir pressure (operation)
795 - 1080 hPa
TemperatureStorage / Transport [ϑ]
-20 - +60 °C
TemperatureOperating ambient temperature min.
0 °C
TemperatureOperating ambient temperature max.
+50 °C
Relative humidityRelative humidity
10 - 95%, non-condensing
Rated operational voltage [UAux]
24 V DC (-20/+25%) V
Protection against polarity reversal
Yes
Supply voltage [UPow]
24 DC -20 % + 25 % V
Siemens MPI, (optional)
yes