View larger Images are for illustrative purposes only. Please refer to data sheet for details.

DC1-342D2FN-A20N 169475 EATON ELECTRIC Variable frequency drive, 400 V AC, 3-phase, 2.2 A, 0.75 kW, IP20/NEM..

Name: DC1-342D2FN-A20N 169475 EATON ELECTRIC Variable frequency drive, 400 V AC, 3-phase, 2.2 A, 0.75 kW, IP20/NEM..
Brand: EATON-MOELLER
SKU: ETN169475
Availability: Discontinued

0/5 - 0 Opiniones

Reference: DC1-342D2FN-A20N

Code: 169475

Manufacturer: EATON-MOELLER

Description:

Variable frequency drive, 400 V AC, 3-phase, 2.2 A, 0.75 kW, IP20/NEMA 0, Radio interference suppression filter, FS1

More details

Categories:

Power XL Frequency Converters

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Viewed products

Best sellers

▲

More info

▲

Variable frequency drive, 400 V AC, 3-phase, 2.2 A, 0.75 kW, IP20/NEMA 0, Radio interference suppression filter, FS1

Eaton Catalog No.

DC1-342D2FN-A20N

Variable frequency drive, Part group reference (e.g. DIL): DC1, Rated operational voltage: Ue = 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2 = 400 V AC, 3-phase, 480 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 380 (-10%) - 480 (+10%) V, Rated operational current At 150% overload: Ie = 2.2 A, Note: Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, Overload cycle for 60 s every 600 s, at 400 V, 50 Hz, Assigned motor rating 150 % Overload: P = 0.75 kW, 150 % Overload: IM = 1.9 A, Assigned motor rating Note: at 440 - 480 V, 60 Hz, Assigned motor rating 150 % Overload: P = 1 HP, Assigned motor rating 150 % Overload: IM = 2.1 A, Degree of Protection: IP20/NEMA 0, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, CANopen®, Fieldbus connection (optional): SmartWire-DT, Fitted with: Radio interference suppression filter, 7-digital display assembly, Frame size: FS1, Connection to SmartWire-DT: with SmartWire-DT module DX-NET-SWD3, Standards: Specification for general requirements: IEC/EN 61800-2, EMC requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1

[

Delivery program

This item will continue to be available for a limited time only and is being replaced by the following item: 185743, DC1-342D2FN-A20CE1

Product range

Variable frequency drives

Part group reference (e.g. DIL)

DC1

Rated operational voltage [U_e]

400 V AC, 3-phase
480 V AC, 3-phase

Output voltage with V_e[U₂]

400 V AC, 3-phase
480 V AC, 3-phase

Mains voltage (50/60Hz) [U_LN]

380 (-10%) - 480 (+10%) V

Rated operational current [I_e]

At 150% overload [I_e]

2.2 A

Note

Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C

Assigned motor rating

Note

for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm^-1at 50 Hz or 1800 min^-1at 60 Hz

Note

Overload cycle for 60 s every 600 s

Note

at 400 V, 50 Hz

150 % Overload [P]

0.75 kW

150 % Overload [I_M]

1.9 A

Note

at 440 - 480 V, 60 Hz

150 % Overload [P]

1 HP

150 % Overload [I_M]

2.1 A

Degree of Protection

IP20/NEMA 0

Interface/field bus (built-in)

OP-Bus (RS485)/Modbus RTU, CANopen^®

Fieldbus connection (optional)

SmartWire-DT

Fitted with

Radio interference suppression filter
7-digital display assembly

Frame size

FS1

Connection to SmartWire-DT

yes
in conjunction with DX-NET-SWD3 SmartWire DT module

Technical data

General

Standards

Specification for general requirements: IEC/EN 61800-2
EMC requirements: IEC/EN 61800-3
Safety requirements: IEC/EN 61800-5-1

Certifications

CE, UL, cUL, RCM, UkrSEPRO, EAC

Production quality

RoHS, ISO 9001

Climatic proofing [ρ_w]

< 95%, average relative humidity (RH), non-condensing, non-corrosive %

Ambient temperatureoperation (150 % overload) [ϑ]

-10 - +50 °C

Ambient temperatureStorage [ϑ]

-40 - +60 °C

Radio interference levelRadio interference class (EMC)

C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.

Radio interference levelEnvironment (EMC)

1st and 2nd environments as per EN 61800-3

Radio interference levelmaximum motor cable length [I]

C2 ≤ 5 m
C3 ≤ 25 m m

Mounting position

Vertical

Altitude

0 - 1000 m above sea level
Above 1000 m: 1% derating for every 100 m
max. 4000 m m

Degree of Protection

IP20/NEMA 0

Protection against direct contact

BGV A3 (VBG4, finger- and back-of-hand proof)

Main circuit

SupplyRated operational voltage [U_e]

400 V AC, 3-phase
480 V AC, 3-phase

SupplyMains voltage (50/60Hz) [U_LN]

380 (-10%) - 480 (+10%) V

SupplyInput current (150% overload) [I_LN]

3.5 A

SupplySystem configuration

AC supply systems with earthed center point

SupplySupply frequency [f_LN]

50/60 Hz

SupplyFrequency range [f_LN]

48 - 62 Hz

SupplyMains switch-on frequency

Maximum of one time every 30 seconds

Power sectionFunction

Variable frequency drive with internal DC link and IGBT inverter

Power sectionOverload current (150% overload) [I_L]

3.3 A

Power sectionmax. starting current (High Overload) [I_H]

175 %

Power sectionNote about max. starting current

for 2 seconds every 20 seconds

Power sectionOutput voltage with V_e[U₂]

400 V AC, 3-phase
480 V AC, 3-phase

Power sectionOutput Frequency [f₂]

0 - 50/60 (max. 500) Hz

Power sectionSwitching frequency [f_PWM]

16
adjustable 4 - 32 (audible) kHz

Power sectionOperation Mode

U/f control
Speed control with slip compensation

Power sectionFrequency resolution (setpoint value) [Δf]

0.1 Hz

Power sectionRated operational currentAt 150% overload [I_e]

2.2 A

Power sectionNote

Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C

Power sectionPower lossHeat dissipation at rated operational current I_e=150 % [P_V]

63.75 W

Power sectionEfficiency [η]

91.5 %

Power sectionMaximum leakage current to ground (PE) without motor [I_PE]

< 1 mA

Power sectionFitted with

Radio interference suppression filter
7-digital display assembly

Power sectionFrame size

FS1

Motor feederNote

for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm^-1at 50 Hz or 1800 min^-1at 60 Hz

Motor feederNote

Overload cycle for 60 s every 600 s

Motor feederNote

at 400 V, 50 Hz

Motor feeder150 % Overload [P]

0.75 kW

Motor feederNote

at 440 - 480 V, 60 Hz

Motor feeder150 % Overload [P]

1 HP

Motor feedermaximum permissible cable length [I]

screened: 50
screened, with motor choke: 100
unscreened: 75
unscreened, with motor choke: 150 m

Motor feederApparent powerApparent power at rated operation 400 V [S]

1.52 kVA

Motor feederApparent powerApparent power at rated operation 480 V [S]

1.83 kVA

Motor feederBraking functionStandard braking torque

max. 30 % M_N

Motor feederBraking functionDC braking torque

max. 100% of rated operational current I_e,variable

Control section

Reference voltage [U_s]

10 V DC (max. 10 mA) V

Analog inputs

2, parameterizable, 0 - 10 V DC, 0/4 - 20 mA

Analog outputs

1, parameterizable, 0 - 10 V

Digital inputs

4, parameterizable, max. 30 V DC

Digital outputs

1, parameterizable, 24 V DC

Relay outputs

1, parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1)

Interface/field bus (built-in)

OP-Bus (RS485)/Modbus RTU, CANopen^®

Assigned switching and protective elements

Power WiringSafety device (fuse or miniature circuit-breaker)IEC (Type B, gG), 150 %

FAZ-B6/3

Power WiringSafety device (fuse or miniature circuit-breaker)UL (Class CC or J)

6 A

Power WiringMains contactor150 % overload (CT/I_H, at 50 °C)

DILM7
DILEM-10

Power WiringMain choke150 % overload (CT/I_H, at 50 °C)

DX-LN3-004

Power WiringRadio interference suppression filter (external, 150 %)

DX-EMC34-008

Power WiringRadio interference suppression filter, low leakage currents (external, 150 %)

DX-EMC34-008-L

Power WiringNote regarding radio interference suppression filter

Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments

Motor feedermotor choke150 % overload (CT/I_H, at 50 °C)

DX-LM3-005

Motor feederSine filter150 % overload (CT/I_H, at 50 °C)

DX-SIN3-004

Design verification as per IEC/EN 61439

Technical data for design verification

Rated operational current for specified heat dissipation [I_n]

2.2 A

Heat dissipation per pole, current-dependent [P_vid]

0 W

Equipment heat dissipation, current-dependent [P_vid]

63.75 W

Static heat dissipation, non-current-dependent [P_vs]

0 W

Heat dissipation capacity [P_diss]

0 W

Operating ambient temperature min.

-10 °C

Operating ambient temperature max.

+50 °C

IEC/EN 61439 design verification

10.2 Strength of materials and parts10.2.2 Corrosion resistance