Product range | Service distribution board IVS | ||
Basic function | Wall-mounting distribution system | ||
Single unit/Complete unit | Complete housing | ||
Degree of Protection | IP30 (only with door) | ||
Description | Profi Plus basic enclosures Module design, can be dismantled completely Exchangeable door hinges | ||
Material | Sheet steel | ||
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey | ||
Colour | RAL 7035, light grey | ||
Information about equipment supplied | including base frame, side panels, bottom/top panels and door Including support frame for the IVS mounting units including insulating surround and mounted insulated support bracket including cable entry at top, with push-through flange | ||
Width | mm | 600 | |
Height | mm | 510 | |
Depth | mm | 262 |
Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
BP-O-600/4.5-IVS 111356 EATON ELECTRIC Surface mounted service distribution board
BP-O-600/4.5-IVS
111356
EATON-MOELLER
Surface mounted service distribution board
Home > EATON - MOELLER
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
More info
▲Delivery programme
Technical data
| General | |||
Standards | EN 60439-1/3 IEC 62208 | ||
Protection class | 1 | ||
Degree of Protection | IP30 (only with door) | ||
Power loss | |||
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 101 | |
Weight | kg | 17.9 | |
| Material characteristics | |||
Material | Sheet steel | ||
Surface treatment | Painting, phosphated and polyester powder coating | ||
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey | ||
Colour | RAL 7035, light grey | ||
Material characteristics | |||
Type Door | Doors with covered hinges Can be removed from 90° | ||
door opening angle | 167° (single mounting) 60° (combination mounting) | ||
Door interlock | Hinge handle with three-point turn-lock Cylinder lock | ||
| Material properties | |||
Mechanical | |||
Impact resistance | IK07 | ||
Cable entry | Various covers allow cable entry from above and/or below | ||
Electrical | |||
Rated operational voltage | Ue | V | 690 |
Rated frequency | f | Hz | 50 |
Rated operational current | Ie | CSA | 630 |
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 101 | |
Earthings | M5 earthing point screw (base frame) M5 self-tapping screw (enclosure side plate, top/bottom panel) M6 weld stud (door) | ||
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification | |||
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890 | |||
Individual enclosure for wall mounting | PV | CO | 56 |
Starting enclosure for wall mounting | PV | CO | 53 |
Middle enclosure for wall mounting | PV | CO | 50 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890 | |||
Individual enclosure for wall mounting | PV | CO | 112 |
Starting enclosure for wall mounting | PV | CO | 106 |
Middle enclosure for wall mounting | PV | CO | 100 |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Not relevant to indoor installations. | ||
10.2.5 Lifting | Does not apply to enclosures without lifting aids. | ||
10.2.6 Mechanical impact | IK07 | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | IP30 | ||
10.4 Clearances and creepage distances | Is the panel builder's responsibility. | ||
10.5 Protection against electric shock | < 0.1 Ω; meets the product standard's requirements. | ||
10.6 Incorporation of switching devices and components | Is the panel builder's responsibility. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Ui = 440 V AC | ||
10.9.3 Impulse withstand voltage | 4 kV | ||
10.9.4 Testing of enclosures made of insulating material | Does not apply to metal enclosures. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | Meets the product standard's requirements. |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE EATON EN.pdf | 51 Mbytes |
|
| BP-O-600/4.5-IVS 111356 111356_RU.pdf | 158 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.