> EATON - MOELLER>Position Switches >F2-AT4 036214 ELECTRIC Spring-rod actuator, for AT4
Previous Product Next Product
F2-AT4 036214 EATON ELECTRIC Spring-rod actuator, for AT4 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

F2-AT4 036214 EATON ELECTRIC Spring-rod actuator, for AT4

F2-AT4

036214

EATON-MOELLER

Spring-rod actuator, for AT4

Flexible rod; For AT4

Spring-rod actuator, For completing insulated enclosure I-AT4, 1, 130 mm, I-AT4, IA-AT4, Only permissible with snap-action contact

Operating head for AT4, IEC EN 60947-5-1, device for world markets, modular system, not suitable for safety functions, use only with snap-action contact

More details


Sensors > Drive head for position switches/hinge switches

Position Switches

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


Spring-rod actuator, For completing insulated enclosure I-AT4, 1, 130 mm, I-AT4, IA-AT4, Only permissible with snap-action contact
Operating head for AT4, IEC EN 60947-5-1, device for world markets, modular system, not suitable for safety functions, use only with snap-action contact

Delivery program

Basic function
Operating heads
Part group reference
AT4
Product range
Spring-rod actuator
Description
For completing insulated enclosure I-AT4
Max. operating speed lateral
1
Rod length
130 mm
For use with
I-AT4
IA-AT4
Snap-action contact
Only permissible with snap-action contact
Notes
The operating head can be rotated at 90° intervals to adapt to the specified approach direction.

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+70 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
Not applicable.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Sensors (EG000026) / Drive head for position switches/hinge switches (EC001483)
Electric engineering, automation, process control engineering / Binary sensor technology, safety-related sensor technology / Position switch / Drive head for position switches ([email protected] [BAA083012])
Type of control element
Spring-rod

ETIM for 036214 Sensors (EC001483)
Feature Name Feature Value
Type of control element (EF006976) Spring-rod

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE EATON EN .pdf 38 Mbytes
F2-AT4 F2-AT4 036214 EN_036214.pdf 135 Kbytes F2-AT4 F2-AT4 036214 EN_036214.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account