Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
S711-34047DC EP-401536 EATON ELECTRIC S711 Soft Starter (24VDC)
S711-34047DC
EP-401536
EP-401536
EATON-MOELLER
S711 Soft Starter (24VDC)
Eaton S711 soft starter, 47 A, 200 - 575 V AC, Us= 24 V DC, with control unit, Size 1, IP20
High Performance Soft Starters
Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
Best sellers
▲More info
▲General Specifications
Product Name
Eaton S711 Soft Starter
Catalog No.
EP-401536
Ean
4015082971083
Product Length/Depth
252 mm
Product Height
174 mm
Product Width
128 mm
Product Weight
3.6 kg
Certification(s)
Ce
RCM
IEC/EN 60947-4-2
CUL
Ul
UL Category Control No.: NMFT
UL Category Control No.: NMFT7
UL File No.: E251034
UL 60947-4-2
RCM
IEC/EN 60947-4-2
CUL
Ul
UL Category Control No.: NMFT
UL Category Control No.: NMFT7
UL File No.: E251034
UL 60947-4-2
Model Code
S711-34047DC
Features & Functions
Fault memory
1000 Failures
Equipped with:
Screen
Motor overload protection
Internal bypass
Motor overload protection
Internal bypass
Features
One direction of rotation
Torque Control
DC Brake
Soft brake
Jog Forward and Backward
Torque Control
DC Brake
Soft brake
Jog Forward and Backward
Interfaces
Modbus RTU (Integrated)
Bluetooth (built-in)
Bluetooth (built-in)
General information
Class
Dimmable (5,10,15,20,30)
Connecting to SmartWire-DT
No
Degree of protection
IP20
NEMA 1
NEMA 1
Frame Size
FS1
Mains voltage - min.
170 V
Mains voltage - max.
632.5 V
Degree of contamination
3
Radio interference class
Class A (IEC 60947-4-2)
Assigned Voltage Supported to Impulse (Uimp)
6,000 V
Starting class
CLASS 20 (Heavy start 3 x Iₑ for 45 s)
CLASS 10 (Star-Triangle Replacement)
CLASS 30 (6 x Iₑ for 30 sec)
CLASS 10 (Star-Triangle Replacement)
CLASS 30 (6 x Iₑ for 30 sec)
Rated Insulation Voltage (Ui)
600 V
Suitable for
Branch circuits, not such as BCPD, (UL/cUL)
guy
Soft starter for three-phase loads, with control unit, algorithm for pumps, DC brake, soft brake, Jog and Bluetooth
Type of voltage
CC
Ambient conditions, mechanical
Mounting position
As required
Impact Resistance
15 g, Mechanical shock
Climatic environmental conditions
Altitude
Max 4000 m (Above 1000 m for detailed derating use S711 Select Software)
Ambient Operating Temperature - Min.
-25 °C
Ambient Operating Temperature - Max.
60 °C
Ambient storage temperature - min.
-40 °C
Ambient storage temperature - max.
70 °C
Climatic Resistance
5 to 95% Relative Humidity
Main conducting paths
Boot
600% (starting current)
Max. 2000 ms (Boot Duration)
Max. 2000 ms (Boot Duration)
Overload Cycle
AC-53b: 3.5-20:340
Assigned Employment Current (Ie) in AC-53
47 A
Assigned Current of Employment (Ie) in AC-53, in triangle
70.5 A
Assigned Employment Voltage (EU) - min.
200 V
Nominal operating voltage (Ue) - max.
575 V
Assigned Operating Voltage (Ue) in AC - Max.
575 V
Rated short-circuit protection
80NHG000B or NZMH2-A100-BT, Type "1" coordination, Main conducting paths
170M3011 "Type 2" coordination, Main conducting paths
170M3011 "Type 2" coordination, Main conducting paths
Feeding frequency
50/60 Hz, fLN, Main Circuit
Nominal voltage (max.)
575 V
Motor rating
Motor power rated at 200/208 V, 60 Hz, three-phase
10 HP
Motor power rated at 220/230 V, 60 Hz, three-phase
15 HP
Motor power rated at 460/480 V, 60 Hz, three-phase
30 HP
Motor power assigned in triangle at 220/230 V, 60 Hz
25 HP
Motor power assigned in triangle at 460/480 V, 60 Hz
50 HP
Motor power assigned in triangle at 575/600 V, 60 Hz
60 HP
Rated operating power at 220/230 V, 50 Hz
15 kW
Rated operating power at 400 V, 50 Hz
22 kW
Rated operating power at 500 V, 50 Hz
30 kW
Assigned power for use in triangle at 220/230 V, 50 Hz
22 kW
Assigned power for use in triangle at 400 V, 50 Hz
37 kW
Assigned power for use in triangle at 500 V, 50 Hz
45 kW
Rated power of the three-phase, in-line, 230 V motor
15 kW
Rated power of the three-phase, in-line, 400 V motor
22 kW
Rated power of the three-phase motor, inside a triangle, at 230 V
22 kW
Rated power of the three-phase motor, inside a triangle, at 400 V
37 kW
Terminal capacities
Terminal Capacity (Flexible with Terminal)
1 x (6 - 70) mm², Main cables
1 x (1 - 2.5) mm², Control Circuit Cables
1 x (1 - 2.5) mm², Control Circuit Cables
Terminal Capacity (Rigid)
1 x (6 - 70) mm², Main cables
1 x (1 - 2.5) mm², Control Circuit Cables
1 x (1 - 2.5) mm², Control Circuit Cables
Terminal Capacity (Rigid/Stranded AWG)
1 x (10 - 2/0), Main Cables
1 x (28 - 12), Control Circuit Cables
1 x (28 - 12), Control Circuit Cables
Terminal Capacity (Braided)
1 x (6 - 70) mm², Main cables
1 x (1 - 2.5) mm², Control Circuit Cables
1 x (1 - 2.5) mm², Control Circuit Cables
Screwdriver Size
1 x 7 mm or T20, Screw Terminals, Main Cables
0.6 x 3.5 mm or PH0, Screw Terminals, Control Circuit Cables
0.6 x 3.5 mm or PH0, Screw Terminals, Control Circuit Cables
Tightening torque
0.5 Nm, Screw Terminals, Control Circuit Cables
4 Nm, Main Cables
4 Nm, Main Cables
Control circuit
Current Consumption
2800 mA, Control Circuit, Digital Inputs
Stress on Fall
0 - 16 V, DC drive
Call Voltage
19.2 - 28.8 V DC
Nominal Control Supply Voltage (Us) in DC - Min.
24 VDC
Nominal Control Supply Voltage (Us) in DC - Max.
24 VDC
Input/Output
Number of outputs
3 relay outputs (1 fixed, 2 programmable)
Output voltage
250 V AC (relay output)
Protection
Finger and back of hand proof, Direct contact protection
Nominal Control Voltage (Uc)
24 V DC (-20%/+20%)
Assigned Employment Current (Ie) in AC-11
3 A
Soft start function
application
- Three-phase motors: Yes
- Soft start of three-phase asynchronous motors
Delay Time
0 - 180 s, Soft start function, Ramp times; 0 - 240 s, Soft stop function, Stop times
Ramp/Start Time
180 s
Starting voltage
Max. 600% FLA, Min. 100% FLA, Soft Start Function
Design verification
Thermal dissipation of the equipment, dependent on the Pvid current
211.5 W
Thermal Dissipation Capacity Pdiss
0 W
Heat dissipation per pole, depending on Pvid current
0 W
Assigned Current of Use for Specific Thermal Dissipation (Input)
47 A
Static heat dissipation, not dependent on Pvs current
35 W
10.2.2 Corrosion Resistance
Meets the requirements of the product standard.
10.2.3.1 Verification of the thermal stability of cabinets
Meets the requirements of the product standard.
10.2.3.2 Verification. Resistance of insulating materials in condic. Normal Heat
Meets the requirements of the product standard.
10.2.3.3. Res. mat. aisl. to excessive heat/fire by the effect of. internal
Meets the requirements of the product standard.
10.2.4 Resistance to ultraviolet (UV) radiation
Meets the requirements of the product standard.
10.2.5 Elevation
It does not apply, since it is necessary to evaluate the entire apparatus.
10.2.6 Mechanical impact
It does not apply, since it is necessary to evaluate the entire apparatus.
10.2.7 Registrations
Meets the requirements of the product standard.
10.3 Degree of protection of mounts
It does not apply, since it is necessary to evaluate the entire apparatus.
10.4 Effluvium distances and clearances
Meets the requirements of the product standard.
10.5 Protection against electric shock
It does not apply, since it is necessary to evaluate the entire apparatus.
10.6 Incorporation of Switching Devices and Components
It does not apply, since it is necessary to evaluate the entire apparatus.
10.7 Internal Electrical Connections and Circuits
It is the responsibility of the panel builder.
10.8 External Conductor Connections
It is the responsibility of the panel builder.
10.9.2 Power Frequency Electrical Resistance
It is the responsibility of the panel builder.
10.9.3 Impulse Voltage Supported
It is the responsibility of the panel builder.
10.9.4 Testing of Cabinets Made of Insulating Material
It is the responsibility of the panel builder.
10.10 Temperature Rise
The quad maker is responsible for calculating the temperature increase. Eaton will provide heat dissipation data for the devices.
10.11 Short Circuit Resistance
It is the responsibility of the panel builder. The specifications of the switchgear must be taken into account.
10.12 Electromagnetic Compatibility
It is the responsibility of the panel builder. The specifications of the switchgear must be taken into account.
10.13 Mechanical function
The device complies with the requirements, as long as the information in the instruction leaflet (IL) is respected.
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON STARTING CONTROLLING MOTORS EN.pdf | 37 Mbytes |
|
| PDF CATALOGUE EATON EN .pdf | 38 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.