> EATON - MOELLER>Circuit Breakers NZM Accessories >Deckel LN3 (beschriftet) 12303519 DX-LN3-010 ELECTRIC Mains choke (3-phase, 550V, 303A)
Previous Product Next Product

Deckel LN3 (beschriftet) 12303519 DX-LN3-010 EATON ELECTRIC Mains choke (3-phase, 550V, 303A)

Deckel LN3 (beschriftet)

12303519

DX-LN3-010

EATON-MOELLER

Mains choke (3-phase, 550V, 303A)

Deckel LN3 (beschriftet)

More details


Circuit Breakers NZM Accessories

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


Main choke, AC, 3p, 10A, 2.94mH, 550V50/60Hz
Eaton Catalog No.
DX-LN3-010
Main choke, rated operating voltage 480 V AC, three-phase, uk =4%
[

Delivery program

Product range
Accessories
Accessories
Mains chokes
Description
three-phase
For use with
DE1, DE11, DC1, DA1, SVX, SPX
Max. permissible connection voltage
550 V + 0% (50/60 Hz) V AC
Rated operational current [Ie]
10 A
Inductance [L]
2.94 mH
Maximum heat dissipation [Pv]
33 W
,

Technical data

General
Standards
IEC/EN 61558-2-20-2000, VDE 0570 Part 2-20/2001-04, UL, CSA
Operating temperature
-25 to +40, up to 70 with current derating (see the note) °C
Storage temperature [ϑ]
-25 - +85 °C
Mechanical shock resistance
11 ms2/15
3 shocks g
Vibration resistance
1 (0 - 150 Hz) g
Vibration
0.35 mm at 10 - 55 Hz
Altitude
0 – 1000 above sea level, up to 5000 with current reduction (see notes) m
Mounting position
Standing vertically, suspended horizontally
Free surrounding areas
< 50 MM
Degree of Protection
IP20 (terminal)
Rated duty factor
100 % DF
Weight
2.2 kg
Electrical data
Rated operational voltage
3 AC 400 V
Max. supply voltage
550 V + 0% (50/60 Hz) V AC
Operating frequency [f]
50/60 Hz
Insulation class
B
Rated operational current [Ie]
10 A
Inductance [L]
2.94 mH
Maximum heat dissipation [Pv]
33 W
Voltage sag [Uk]
4 %
Connection
Terminations
✓
PE stud
✓
Terminal
4 mm2
Terminal
20 - 10 AWG
Tightening torque
0.8 Nm
Notes

The following applies for the installation altitude: Derating with respect to the rated operational current Ie:

,

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
10 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
33 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+40 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
,

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Coil for low-voltage (EC002563)
Electric engineering, automation, process control engineering / Electronic coil and filter / Electronic choke coil / Electronic choke coil (unspecified) ([email protected] [ADJ199007])
Suitable as interference suppression reactance coil
No
Suitable as net reactance coil
Yes
Suitable as commutation reactance coil
No
Suitable as ripple filter choke
No
Suitable as output reactance coil
No
Number of poles, primary side
3
Rated clock frequency
0 kHz
Rated operation frequency
50 - 60 Hz
Max. rated operation voltage Ue
550 V
Rated current at AC
10 - 10 A
Max. rated current (Ith) at rated voltage DC
10 A
Rated inductance
2.94 mH
Degree of protection (IP)
IP20
Relative short circuit voltage
4 %
Resonance frequency
0 Hz
Degree of protection (NEMA)
Other
,

Approvals

Product Standards
UL 508C; CSA-C22.2 No. 14; IEC/EN61800-3; IEC/EN61800-5; CE marking
UL File No.
E167225
UL Category Control No.
XPTQ2, XPTQ8
CSA File No.
UL report applies to both US and Canada
North America Certification
UL listed, certified by UL for use in Canada
Specially designed for North America
No
Suitable for
Branch circuits
Max. Voltage Rating
1~ 240 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey), 3~ 240 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey), 3~ 480 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey)
Degree of Protection
IEC: IP20
,

Dimensions

]

Datasheet - PDF

▲
Title: Size: Type:
PDF CATALOGUE EATON EN .pdf 38 Mbytes
Deckel LN3 (beschriftet) DX-LN3-010 12303519 12303519_EN.pdf 239 Kbytes Deckel LN3 (beschriftet) DX-LN3-010 12303519 12303519_EN.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account