> EATON - MOELLER>DUMECO Switch-Disconnectors>4K6254/270MMDCM/DMM 1314375 Y8-1314375 ELECTRIC Industrial Automation Bussines and Industrial Control ..
ANUNCIAR
Previous Product Next Product

4K6254/270MMDCM/DMM 1314375 Y8-1314375 EATON ELECTRIC Industrial Automation Bussines and Industrial Control ..

4K6254/270MMDCM/DMM

1314375

Y8-1314375

EATON-MOELLER

Industrial Automation Bussines and Industrial Control Devices Switching Devices

4K6254/270MMDCM/DMM

Accessories for Dumeco types DMM 40/63 A-254mm, for part no. DCM 40/63-270mm height of switch, from bottom of switch to top of operating shaft., 6mm square

More details


Low-voltage industrial components > Switch operating shaft

DUMECO Switch-Disconnectors

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

Total: $21.87
Unit price: $21.87
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


Auxiliary contact, 2N/O+2N/C for DMM part no.
EL-Nummer (Norway)
0001405716
Auxiliary contact, Switching duty 16 A, 250 V AC, Contacts N/O = Normally open: 2 N/O, Contacts N/C = Normally closed: 2 NC, For use with: DCM, DMM
[

Delivery program

Basic function
Auxiliary contact
Switching duty 16 A, 250 V AC
Contacts
N/O = Normally open
2 N/O
N/C = Normally closed
2 NC
For use with
DCM
DMM
,

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
16 A
Heat dissipation per pole, current-dependent [Pvid]
0.11 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+50 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
,

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block ([email protected] [AKN342013])
Number of contacts as change-over contact
0
Number of contacts as normally open contact
2
Number of contacts as normally closed contact
2
Number of fault-signal switches
0
Rated operation current Ie at AC-15, 230 V
6 A
Type of electric connection
Screw connection
Model
Top mounting
Mounting method
Front fastening
Lamp holder
Other
]

ETIM for 1314375 Low-voltage industrial controls and switchgear (EC000916)
Feature Name Feature Value
Length (EF001438) 188 mm
Cross section height (EF001666) 6 mm
Cross section width (EF001667) 6 mm

Datasheet - PDF

▲
Title: Size: Type:
PDF EATON INDUSTRIAL SWITCH DISCONNECTORS EN.pdf 8 Mbytes
PDF CATALOGUE EATON EN .pdf 38 Mbytes
4K6254/270MMDCM/DMM Y8-1314375 1314375 1314375_EN.pdf 152 Kbytes 4K6254/270MMDCM/DMM Y8-1314375 1314375 1314375_EN.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account